I Need VBA Code to change date format "mm.dd.yyyy hh:mm:ss" replace as mm-dd-yyyy. IN E:E column
Like "19.06.2014 19:12:13" change as 19-Jun-14
Find the attachment : Dt_chng.xlsb‎
I have a file that I want to change the format for my date field. Currently the cells are in general format. How can I put them into a date format. Example the first one is 20070328, how can I make this 03/08/2007?
View 5 Replies View RelatedI have txtboxes in which I write date in format dd/mm/yyyy but if I want to put date in cell correctly from this textbox in need to declare event on exit -change format to mm/dd/yyyy and then it puts date in desired format which is dd/mm/yyyy and my regional settings are English(uk)
Is there a way to put any date format in textbox and in cell there will always be format dd/mm/yyyy or at least if date is entered in format dd/mm/yyyy that also in cell the same format is putted
I use MS Excel 2007. When I type in date as 2/3/2009, it gets typed as 3/2/2009
i.e. DD/MM/YYYY to MM/DD/YYYY. Attached is file for your information. I have even formatted the Cells in that particular column to Date Format under British (UK) DD/MM/YYYY. I want dates in DD/MM/YYYY format only.
I have a TextBox and a ComboBox. the TextBox shows the current date
VB : TextBox1.Value = Format(Date, "dd/mm/yyyy")
The ComboBox has a list index of years say from 1991 to 2030. Is it possible Change only the "yyyy" in the TextBox based on the changed value in ComboBox.
Say the textbox1 shows today 14/06/2014. now if we select 2016 in ComboBox1 the TextBox1 date should changed to 14/06/2016.
I have a list with several thousand dates listed like:
19931014
19900724
19910701
19911209
That is, yyyymmdd.
I would like to list it as yymm only. Is there a way to convert it in Excel? I have for a long time been copying and pasting in to Word then doing a search and replace of the first and last two digits, which results in the yymm format I am looking for. A better way would be nice.
Is there a way to lock the date format as MM/DD/YYYY. I'm using the excel file as data file but one of the softwares fails to run this excel-based data file due to date format since the date format has to be in numeric format.
1/12/2013 changes to 12-Jan while processing? How to lock this format?
I need to take 3 columns (G, H, I) and format the dates that are in standard format to mm-dd-yyyy.
The code I have looked at seems way to complicated and I couldn't get it to work
I have a 20,000 line Excel sheet...
And all the dates are entered like this:
2009 02 08
I want to add a dash, so they look like this
2009-02-08
so I added a command button, and this code, but its not searching the sheet and adding the dash's...
the date I want to copy paste is in [dd/mm/yyyy] format in a single cell.
I want to isolate the [dd], [mm] and [yyyy] and write them down in 3 different cells. How can I do this?
In MS-Excel 2007 dates seem to be limited to YYYY/MM/DD style, which I imagine there is a way to alter it into MM/DD/YYYY. I looked into MS Help, and a google search, and either I was using wrong keywords, or not, but I couldn't find anything to simply change date arrangement. If I am being unclear, I am talking about the function '=DATE(YYYY/MM/DD)' is what I want to change.
After I get that fixed, I need there to be a function to reproduce a 3-day work week (Mon, Tue, and Thur). e.g.:
10/05/09 [data] [data] [data]
10/06/09 [data] [data] [data]
10/08/09 [data] [data] [data]
Week 1 [data sum] [data sum] [data sum]
10/12/09
10/13/09
10/15/09
Week 2
10/19/09
10/20/09
10/22/09
............................
I having problem to determine the format value of dates that needs to be inserted in a Userform.
I have the following format in my userform for my Textbox:
[Code] ......
When I select the calendar in my userform that is set as follows:
[Code] .......
And select the first day of the month, it will always add the format as 05/01/2014 but if I select today’s date as example it will add it in the right format: 2014/05/26
I have included a sample to demonstrate the function of the calendar as I have declared it public as d in a module, therefore making the population of my userforms textbox easier to add information on dates.
Calendar.xlsm
If you add 2014/05/01 - 2014/05/26 and 2014/05/06 you will see where the system is having problem with the month and dates I guess the system confuses the two?
I need the format as follows: yyyy/mm/dd
creating a user form that will make my job of recording data far easier. However, when the date is entered, it changes it form UK to US.
I've checked the cells and they are formatted for UK dd/mm/yyyy.
The script is as follows:
Private Sub UserForm1_Click()
End Sub
Private Sub DataInput.UserForm_Initialize()
[Code].....
I want to convert to date from DD-MON-YYYY into YYYY-mm-DD format in column J.
It is also applicable to date separated by semicolon. It was working previously but not now.
HTML Code:Â
Sub DATEE()
Dim rng As Range
Dim rngTotal As Range
Dim i As Integer
Set rngTotal = Range("j1:j" & Range("j" & Rows.Count).End(xlUp).Row)
[code]....
I made one mistake . date conversion should be 2014/03/11 if orignial date is 11-MAR-2014
I finally finished programming the userform that I've been working on for about a week and started to populate the database with info (dates, names, TRUE/FALSE etc etc).
Then all of a sudden I notice that as I switch between "records", one of the dates gets a life of its own - it changes from dd/mm/yyyy to mm/dd/yyyy as I select it. When I jump onto another record and select that previous record again, the format changes from mm/dd/yyyy to dd/mm/yyyy.
This happens with ALL dates where the days and months are =< 12.
I thought I'd apply formatting to the text box to stop that happening with the code below:
I'm currently trying to do some error checking on a cell where the user has to enter the exact date format as "dd/mm/yyyy". I have been using isDate to check if its a date and not text and then using the below function to check the exact format:
View 2 Replies View RelatedI need to change mm/dd/yyyy to dd/mm/yyyy.
Going to format cells and custom Excel thinks the data is already dd/mm/yyyy.The data I have is historical so the date 1/03/2014 has not happened yet so I need to change it to 3/01/2014.
I need to change a whole column of dates shown as “dd.mm.yyyy” to “dd/mm/yyyy”. I know the answer must be quite easy but it’s been bugging me for some time. Even after sorting the cells, it only sorts using the first two digits, totally ignoring the rest. IE, it sorts 01.07.2009 before 15.05.2009, also before 03.02.2008.
View 3 Replies View RelatedI have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
I have created a userform but I am having extensive problems with the date formats.
My system is set to UK and short date is set to: DD/MM/YYYY
When I used code to add the values in the userform to the spreadsheet, any that contained a date format would revert to the US format.
So I finally figured out to use DateValue to format it correctly for example: ...
I have two columns where there are dates (e.g. 11/05/2009) in a date format; I would like to change the format to `general`; but without losing the original values, i.e. I still want to see 11/05/2009, but just in `general`format. Is it possible to create a macro that will do that? I want these values to stay in the same place, i.e. if it is in cell K10, I still want to have it there - just in other format.
View 9 Replies View RelatedI have an excel sheet full of dates in text format and want to convert them into regular format. For instance, one of the dates listed is in text as "60801". I'd like it to show in regular date format of mm/dd/yyyy, so that 60801 becomes 8/1/2006.
I want to sum values in a column only if the year of the date in the adjacent column is <= to the year in cell F61. the column to evaluate is in the format d/mm/yyyy, and F61 is just yyyy. What I want to accomplish but it doesn't work:
=SUMIF(year(I9:I57),"<="&F61,H9:H57)
I need to add 65 years to a column of birth dates and the result must be in yyyy/mm/dd format. What is the formula?
View 11 Replies View RelatedI have a form on which I select a date (using a calendar form) and on the form it works perfectly. The date is in the correct dd/mm/yyyy format for example (03/04/2013 - 3rd April 2013), I then insert this date into a worksheet and it comes out in the correct format, but it is actually turning the dates around so where it should be putting 3rd of April (03/04/2013), it's inserting 4th March (04/03/2013) instead. It looks very much like the form sees the date in dd/mm/yyyy format and the worksheet when taking the data from the form thinks it in US format (mm/dd/yyyy).
[Code] .....
The formula below is to change the fill colour of a date cell prior to the date expiring. The 120 value is number of days
=(E7-today())<=120
The problem i have is it only seems to work if i format the cell and use mmm-yy.
I want to use the same formula for dd-mm-yy..
when I do Format Cell, the date formats offered use US formats like 20/02/1999. Why does it do this, and can I fix it? I suspect that this the root of the following problem.
I have a button on a userform to enter today's date into a textbox. It enters it as 05/27/2009. The wrong format. I save the data to the worksheet, then use the data form to go to the next record, then back. The date then appears in the correct format as 27/05/2009.
Another related problem: if I enter a date manually into the textbox on the dataform, such as 2/3/2008, it interprets it as Feb. 3, and when I save it to the worksheet, and then use the form to view it, it comes out as 3/2/2008.
In column M, i have a long series of times (times of day) which are currently formatted as "1654", "1021", "1628", etc. In column AI, i need to reformat those dates to look like: "00:00:00.000"
What would the formula to accomplish that look like?
I have the macro below which opens csv files stored in a user selected folder and processes them changing the date format in column D from DD/MM/YYYY to text stored as YYYY-MM-DD.
For most of the dates the code works without issue, but for some (those with a month <12 possibly) it transposes the MM and DD incorrectly.
I understand that when opening the CSV's in excel it automatically converts the dates to DD/MM/YYYY, so I'm actually opening in wordpad which displays as YYYY-MM-DD, with only a portion being incorrect.
I've attached a couple of sample files (pre and post conversion).
Status_20post.csv‎
Status_20pre.csv‎
Need to Change date and time Format.
23 June 2013 14:02:10 BST
" 23 June 2013 00:47:58 BS"
23 June 2013 13:22:21 BST
23 June 2013 13:22:21 BST
Find the attached dump : jlr.xlsx
Required Output
06/23/2013 14:02