I want to sum values in a column only if the year of the date in the adjacent column is <= to the year in cell F61. the column to evaluate is in the format d/mm/yyyy, and F61 is just yyyy. What I want to accomplish but it doesn't work:
I have a field with a "YES"/"NO" drop-down box. There are three fields below which have some default formatting (thick purple dot-dot-dash borders). When the drop-down field is "YES", those three fields should change borders to a single thin black bottom border line.
OK... so that's the setup. And I should note here that it does in fact format properly. However, the problem I'm having is that the screen does not update / repaint with the new formatting. The thick purple dot-dot-dash borders remain, for the most part.
If I page down, then page back up, the new formatting appears just fine. When I switch from "YES" to "NO", again, the formatting changes, but the screen does not update/repaint so the only way to see the new formatting is to again... page up and then page down again.
I'm wondering if anyone knows a way to force the screen to repaint/update so that my users will see the new formatting without having to page up/down.
I have txtboxes in which I write date in format dd/mm/yyyy but if I want to put date in cell correctly from this textbox in need to declare event on exit -change format to mm/dd/yyyy and then it puts date in desired format which is dd/mm/yyyy and my regional settings are English(uk)
Is there a way to put any date format in textbox and in cell there will always be format dd/mm/yyyy or at least if date is entered in format dd/mm/yyyy that also in cell the same format is putted
I have a file that I want to change the format for my date field. Currently the cells are in general format. How can I put them into a date format. Example the first one is 20070328, how can I make this 03/08/2007?
I'm looking to set up a combo box with different year options and add functionality so the data that can be seen on the sheet at a given time is driven by the combo box year value. (functionality somewhat like a webpage, where once you choose a certain value from a drop down box, you see data corresponding to the value)
I'm using a ComboBox ,ComboBox2_Change(), to Call and run 1 of 4 different macros. It works fine if I choose a different item in the list each time, but if I choose the same one, it won't run the macro a second time.
I have a combo box that I have populated with choices (months of the year). I require users to select the month they wish to view their payslip with and then press "Go" (a command button) and jump to the worksheet that contains their payslip info. How do I get VBA (Excel 2007) to do this please? I have tried on the CommanButton1 code page to type
If combobox1.value = "May" Then Goto Worksheets("Sheet3")
This doesn't work and I know I'm doing something wrong as I remember when I was doing my project at school you had to give each combobox selection a value like 0, 1 or 2 but I cannot remember how to do that!
I have three textboxes (16,17,18) that need to be disabled if a certain value ("Regular Hours") is in combobox1. Would I use an If statement? Also, is there a way to "gray out" the textboxes to show they are disabled?
3 work sheets nameWorksheets "InfoData" to save month NameWorksheet "Jan" for JanuaryWorksheet "Feb" for February1 x ComboBox = monthBox 4 x CommandButton = Week1Button,Week2Button,Week3Button,Week4Button --------------- I have Problem opening worksheet from userform. Name of the months are in Combox. So when I select month January from comboBox and click on Week 1 command Button it should open worksheet named "Jan" and Select Cells(2,1) to show Week 1. And Same for week 2, week 3 and week4 but will select different Range or cells. I have attached the screenshot of userform and also the workbook.
Private Sub Week1Button_Click()
For i = 1 To 13
If monthBox.Value = Worksheets("infoData").Cells(i, 1) Then
I am trying to create a macro that will allow the user to select choices from combo boxes on a userform. The choice of one combo box determines what will be shown in the next combo box and so on. This will occur a set number of times (depending on what they are looking for), at which point the list of possible choices will be presented.
I populated one combo box in UserForm_Initialize() but then I might have to change the others with Combobox1_Change()...
i have a user form with 4 combo boxes and one text box. what i've tried to do is make it so that if the month combo box reads january, then all of the info is placed in a worksheet called january. at the moment it is putting all the info inputted into one sheet. if some one could take a peek at the code below.
If cbomonth.Value = January Then Sheets("January").Select
Do If IsEmpty(ActiveCell) = False Then ActiveCell.Offset(1, 0).Select End If Loop Until IsEmpty(ActiveCell) Or IsEmpty(ActiveCell.Offset(0, 1)) Or IsEmpty.....................
I thought I had finished my project but I keep getting errors, the latest one being that I have 2 comboboxes on userform "timekeeping". When I press the commandbutton "Submit", I want the values in the textboxes on that form to be placed in the spreadsheet, depending on what the selections the user has made in the comboboxes but I keep getting an error saying that the macro doesnot exist in the workbook even though it does!
The file is too big to upload here so it is found on rapidshare
I am working on a budget for myself and want it to have running dates so the first data column will have the current month. I was able to succeed with this using the EOMONTH function followed by EDATE functions in the following cells, I then have these columns filled using a nested VLOOKUP MATCH function pair.
The problem I run into is with the months that extend into the next year, in my data table I have month by month listed started on 01/01/2014 ending 12/01/2014 but as soon as the month is no longer January the last column in my budget cannot find the information needed due to it looking for 2015. so what I would like to know is if there is a way to make the data table change the year to the following year after today is beyond that month, so for example on March 1 2014 both January and February would be changed to 2015.
when i choose material from my combobox Options (cboTM), i wanted, only the textboxes regarding to the sheet material unlocked, and the others locked with the color of the form, and the same for the other options like worklabor and equipments. i could blocked for material with this code :
The prob is, worklabor and equipments will be blocked too, and i dont know how to put correct info on the textboxes.
I have worksheet of data that I need to sort by year then month. Currently when I try to sort the data by data excel sorts by the month then year. how to reverse this so the dates are sorted by year then month?
I use MS Excel 2007. When I type in date as 2/3/2009, it gets typed as 3/2/2009 i.e. DD/MM/YYYY to MM/DD/YYYY. Attached is file for your information. I have even formatted the Cells in that particular column to Date Format under British (UK) DD/MM/YYYY. I want dates in DD/MM/YYYY format only.
I have a worksheet called "zz_Exchange" that contains the exchange rate for my company for each month of the financial year. I am using this info in a summary page that uses the data for multiple calculations in the workbook.As we pass each month I would like to move the focus of a cell in the summary sheet to the relevant month in "zz_Exchange"
The column names are "currency_code" (USA Euro etc), "currency_year" (09, 10) "period" (1-12) "exchange_rate" (this is where the data is held)
I would like to have a single button that changes a range of cells from the USD to EURO to perhaps CAD symbol. Can this operation be performed, such that if I start in dollars, and I click the button once, it shifts by range to EURO (not formulas...just symbol)...and then if I click the same button again, it goes to CAD, and then back to USD with a third click?
I have a drop down combo box with 4 options in (1, 2,3 and 4). Under this I have a label. What I want to do is have it so if I select, for example "2", then it says "D11 DJJ" In the label. The name of my CBO is CBOCarNum and the name of the label is LBLRegi
I would like to have a ComboBox on a worksheet (worksheet1) that is populated by a list on another worksheet (worksheet1). Each time I select something from the ComboBox, it would display text in a cell within worksheet1.
For example, the ComboBox would have "Cat", "Dog", "Cow". And when I select "Dog" from the ComboBox, it would display in a cell nearby "Woof".
I have a list with several thousand dates listed like:
19931014 19900724 19910701 19911209
That is, yyyymmdd.
I would like to list it as yymm only. Is there a way to convert it in Excel? I have for a long time been copying and pasting in to Word then doing a search and replace of the first and last two digits, which results in the yymm format I am looking for. A better way would be nice.
Is there a way to lock the date format as MM/DD/YYYY. I'm using the excel file as data file but one of the softwares fails to run this excel-based data file due to date format since the date format has to be in numeric format.
1/12/2013 changes to 12-Jan while processing? How to lock this format?
I have ComboBox on a UserForm that is looking to a long list on a worksheet. A lot of the entries in this list start with a brand name instead of a more discriptive name. I really need to be able to find an entry with any key word (not just the first word) in this list.