VBA / How To Use Variable In Userform Declared In Module
Sep 9, 2013
I am trying to use some code similar to what i have used in one of my Modules in a Userform (The module calls this userform)
I have declared a few variables in the module:
Code:
Public LastRow As Long
Public TabLen() As Integer
Public AHUArray() As String
Public ArrayDim As Integer
and i want to try and use them in a userform (i call the userform through an bit of code that usures that the other subs that assign values to the variables have been used so there should be values in the variables??i think?)
i get to this line in my userform
Code:
TabPos = TabPos + TabLen(i)
this is the first line that requires a value to be in the array and it errors: Subscript out of range
I just want a few variable that are used in a module to be available in other modules and userforms.
EDIT:the (i) is decalred in this sub within the userform. A thought occurs, the sub in the userform is a private sub, might that effect it?Also, explain Sub vs Private Sub vs Public Sub?, im new to this! the sub that fils the arrays in the module is just Sub SubName_Click()
I got some codes defined as below and I want use a userform for and checking the process. If ı could use variable "i " in userform, my codes would work.
Sub Worksheet_Change(ByVal Target As Range) Dim KeyCells As Range
' The variable KeyCells contains the cells that will ' cause an alert when they are changed.
I created in module custom toolbar with a button, see the
Option Explicit Public ctrlGUI As CommandBarControl Sub CreateToolbar() Dim cb As CommandBar On Error Resume Next Application.CommandBars("Cust").Delete On Error Goto 0 Set cb = Application.CommandBars.Add( Name:="Cust", temporary:=True) With cb .Visible = True Set ctrlGUI = .Controls.Add(Type:=msoControlButton, temporary:=True) With ctrlGUI .FaceId = 3205 .Style = msoButtonIcon .............
I have a macro that when it runs presents a form that gives the user an option to skip the calculations or continue. If they click Skip then it continues the 'Next CE' . My problem is I can't get the Boolean value to pass from the form to the macro. Here is what I have
The main macro
Sub Dividend_MF() For Each sh In ActiveWorkbook.Worksheets( Array("G&I", "Growth")) For Each ce In sh. Range("a5:a" & sh.Range("a65536").End(xlUp).Row) If Not IsEmpty(ce) And Not (IsError(ce.Offset(0, 56))) Then If ce.Offset(0, 56) = "X" Then
I am writing a Sub2, where I need to extract the value of another variable, which is calculated in some other Sub1. I declared the first Sub1 (where the variable is being calculated) as Public Sub1,
I have some code in which I need to pass the value of "j" from one module to another. "j" is declared in Sheet1 (Data) under the Microsoft Excel Objects.
I am trying to pass a variable called "Filter" from a Private Sub to a Module but keeping coming up with a zero value in the Module. I tried to make the variable Global but that didn't seem to work.
i know i have done this before but im totally blanking. I want to user the inputvalue in procedures called from controller, but it just shows as empty.
Code:
Sub controler() Static inputvalue As Long inputvalue = InputBox("Please set min size of trades.") 'other macro's called here end sub
I would like to save a module level variable but do not know how to do it. I have tried using the public key word. If I put it in the sub, I get an error when it tries to compile the sub. If I put it outside of a sub, it just doesn't work. Surely this is something easy.
The attached file contains a simplified version of a more complex macro in which a sub routine will be called a number of times to change the colours of cells in different ranges. However, an error is triggered because the a variable and range are not defined in the subroutine although they are in the main part of the macro.
I know I am missing something obvious here, but I'd appreciate any help in knowing how I can define the ranges in the main procedure and then call the subroutine to change values in the different ranges.
I have a Sub() in a module that sends an email to address that it retrieves from a spreadsheet.
See portion of code below
HTML Code: Do vaRecipient = Application.InputBox( _ Prompt:="Please add the name of the recipient such as:" & vbCrLf _ & "excel@microsoft.com or just the Staff ID.", _ Title:="Recepient", Default:=Range("I" & vaRow).Value) Loop While vaRecipient = ""
[Code] .......
This is basically showing 3 popup boxes one after the other to verify each address,
Is it possible to either have it show an input box with 3 fields or ( what I'm currently trying) is to show a Userform . I have tried Userform12.show but it isnt working.
I have a project with many textboxes on different forms. On some of the textbox_exits on some of the forms, I call a standard module that checks what the user has input. If the user needs to change the input, a msgbox appears to inform the user the info needs to be changed.
I have tried to use ControlSource, Name etc., But I cannot seem to setfocus back onto which ever textbox the input needs to be changed. I think it has something to do wih the _exit event, but not sure.
I have a splash screen (user form) which displays fo a number of seconds. The UserForm_Activate routine uses Application.OnTime to run the KillSplash subroutine, which is defined in Module1. Thing is, I would like to move the "KillSplash" routine to the UserForm module. What should be the full name of KillSplash I need to pass to OnTime? What "trick" do I use to make "KillSplash" visible to Application.OnTime?
I would like the users to be able to exit the whole module via double clicking the form. When the form is double clicked, the double click event appears and I am wondering how to put code into this procedure which exits the whole module.
Other than using the search on a 1 by 1 basis, is there an easier way to locate Declared variables that are unused in the code and/or Public variables that are only used in 1 sub/function?
Can I place userform event handling within the code module where the rest of my program resides or does it have to go in the code module that is attached to the userform?
I am trying to pass a string array into a form. I have added a member string array to the form, and a property to "Let" the array in the the member array.
Private sFormString() As String
Property Let FormString(value() As String) sFormString = value End Property
I can pass a string in using a procedure:
Sub StringArrayTest1()
Dim TestString() As String Dim frmString As FString
but I cannot "modulate" the code, or else I get an internal error (error 51). I.e. this code doesn't work:
Sub StringArrayTest2Mod(TestString() As String, frmString As FString)
frmString.FormString = TestString
End Sub
Sub StringArrayTest2()
Dim TestString() As String Dim frmString As FString
Set frmString = New FString Redim TestString(1 To 2) TestString(1) = "Cat" TestString(2) = "Dog"
Call StringArrayTest2Mod(TestString, frmString)
End Sub
Does anyone know why this happens? Obviously, in the example code its not an issue, but the application I'm using this for is more complex, and some modulation here would be good.
I am using Excel 2010 and late binding to generate reports. The sheets are blank and unused. I have the UserForm being opened on Workbook_Open and the actual VBA for doing the work in a separate macro in the workbook. All the posts I have found are dealing with accessing cells from the UserForm and I haven't found any dealing with connecting a macro to the UserForm output.
My question is this: I want to return from the UserForm the flags of which reports to run to the (unopened) macro containing the code to do so. How do I open the macro and pass the variables to it?
The UserForm is creatively called "SelectionForm" and the macro is called "DailyFTP" with a Main sub as the entry. I know I can use the code under to capture the radio button and checkbox choices. I have other variables like the names of files set as global variables in the DailyFTP macro. The macro doesn't exist until SelectionForm opens it, so they must be set after the macro is in memory.
I have several non-modal userforms in my App, some of them have date-fields that require manual entry typing of dd/mm/yy etc (No single userform has more than one date-box in it, this I think may be pivotally useful)
Now the Userform 'Calendar' that is built on the class of the same (cCalendar) name, has the write value line 'ActiveCell.value = theCal.value'
I'm looking to change this to refer to the correct userform.Textbox value, depending on which form is open.
I would imagine I could simply have a global string, whose value is set (or re-set) whenever a Userform is initialized (some sort of 'ActiveUF.value = Me.Name), where I get lost is referring to the components by name, so as to have a case statement by where I go:
Code:
Private Sub theCal_AfterUpdate() Select Case ActiveUF Case "AddForm" application.vbe.components("AddForm").controls("AddFormDatePicker").value = theCal.value Case "EditForm" '.... etc end select end sub
better way of doing this (instead of passing around the userform name as a variable) - or proper syntax for referring to controls outside of the 'active' userform (but an open userform nonetheless)?
Every time I have to do this particular thing with userforms, I completely forget how, and the object browser always leads me on an infinite loop of Application.vbe.activevbproject.vbcomponents.vbe.active....
PS - there may be one slight complication to the process - one of the forms, has a 2-tab page in it, each page having similar (but named differently) fields. So I may need to be able to throw in 'Activepage' or whatnot
After all the awesome macros I've obtained with the help of all of you, I now have over 30 macros, each in its own module. I have tried without success to re-name the modules with no luck. How is everyone organizing these?
In order to deal with the multitude of screen resolutions that can be found at our work, I have got a module to check the current screen resolution on loading the workbook. I then have set up 3 different sized userforms, all containing the same coding, and based on the displayed screen resolution one of these is open (the userforms are named Customer1, Customer2, Customer3).
The displayed userform then has a button to show another userform (Customer_Details), and this form requires some referencing back to the previous form for some of it's information eg,
customer_details.textbox1.text = customer(1, 2 or 3).textbox1.text customerdetails.combobox1.list = customer(1, 2 or 3).combobox.list
way for me reference the specific "Customer" form that has been opened, without calling it by name?
