Can I place userform event handling within the code module where the rest of my program resides or does it have to go in the code module that is attached to the userform?
View 3 RepliesIs there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies View RelatedI have a userform with a single blank multipage. At runtime additional pages are added, the number of pages depends on input from another userform. Six frames, containing labels, textboxes and comboboxes are then added to each page.
I need to be able to use the textbox and combobox change events of these dynamically created controls to perform lookups and calculations. Although I can name the controls at the time they are created, it is not feasible to write code specifically for each control (I can have over 1,600 text boxes distributed over 9 pages, for example).
Having searched for some time on how to achieve this I believe using a class module is the way to go. However, how to use a class module is just not sinking in I'm afraid.
HTML Private WithEvents mpTextBox As MSForms.TextBox
Private WithEvents mpComboBox As MSForms.ComboBox
Private Sub Class_Initialize()
Set mpTextBox = MSForms.TextBox
Set mpComboBox = MSForms.ComboBox
End Sub
Private Sub mpComboBox_Change()
MsgBox "ComboBox value has been changed."
End Sub...........................................
The issue I'm having is with the ActiveX Spin Button (in 2007, formerly in the Control toolbox in 2003). I need the Spin Button to call a certain macro whenever it is clicked up or down. I know how to do this with one spin button, the problem is that the workbook I'm creating could potentially have dozens (or even hundreds) of these spin buttons that all need to call the same macro. It doesn't seem feasible to have to create separate Change event functions for each of these.
My company used to use the simpler form controls for this process, but a situation has come up where we need the ability to make the buttons invisible, or at least appear disabled, and that doesn't seem doable with the form controls.
So my question is, is there a way to specify in my workbook that whenever a spin button is clicked, this particular macro is to be called? Or even, whenever an ActiveX object is clicked, call the macro, because the spin buttons will be the only ActiveX objects in the workbook. I've read a bit about how to create global event handlers for worksheets and workbooks, but I can't find anything related to spin buttons specifically.
In a Userform, is there a way to run code that's listed under another UserForm event subroutine?
Example:
I have a Listbox and several Labels. When I click on a selection in the listbox, it populates the labels with various data from a spreadsheet. This code is in a "list_AfterUpdate()" subroutine.
If I change a piece of data and click a CommandButton1, I would like the labels to automatically update.
The only way I can think to do that (at present) is to run the code listed in the "list_AfterUpdate()" subroutine.
Is there a way to run that code without duplicating it in the "CommandButton1_Click" subroutine?
I am having trouble working through the examples given on other posts for this topic. I have a userform that creates a number of controls at runtime. One group of controls is a series of textboxes and a label underneath that sums the values of the textboxes. When a user changes the value in a textbox the label needs to update the sum. I have read about created class modules to define the event but it is all going over my head.
A piece of the code that creates the controls is:
Excel 2010
I am trying to set public variables from an event handling procedure based in a worksheet so I can use that variable in a userform. Nothing I have tried works no matter where I declare the variable. I am using a msgbox to display the variable (a range) but it shows as blank regardless of whether I place the variable in a module, this workbook object or in the sheet object where the event code is placed.
I am sure there is a simple way to transfer variables from the sheet's code (where it must remain as the variable depends on the target cell's position that triggers the event).
I am using the following Selection_Change Event to show a UserForm when a cell in 1 of 31 named ranges is selected.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
Dim i As Long
For i = 1 To 31
If Not Intersect(Target, Range("StatPost" & i)) Is Nothing And Target.Value = "" Then
If Target.Offset(0, -8).Value = "" Or Target.Offset(0, -7).Value = "" Or Target.Offset(0, -6).Value = "" Or Target.Offset(0, -5).Value = "" Or Target.Offset(0, -3).Value = "" Or Target.Offset(0, -2).Value = "" Or Target.Offset(0, -1).Value = "" Then....................
Is there any code that will trigger an event macro when a Module is activated in the VBE?
View 9 Replies View RelatedVBA can do this:
The first is an event module for your worksheet, the second needs to go into a standard code module.
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As ...
I have a class module (MyCtrlEvents) with a sub (TxtGroup_Change) which I want to handle on a change event for some specific textboxes.
When the form is opening I don't get the correct sum for the textbox "TBSum601". It should be 200 but I get 14464
When I then also change a number in the form for any control like "TB7%", the change trigger event doesn't seem to occur....
Is there a standard way to organize sections of code with code tags? Due to the nature of my work, there is a lot of documentation involved. And, my spreadsheets rely heavily on VBA. These code tag sections will be going into a design specification, so that there is a layer of traceability from the document to the program. These are the general sections or item numbers that I've come up with.
1. Dimensions and Variables
2. Data
3. Processing the Data
4. Rules of analysis
5. Analysis
6. Formatting
I guess I'm looking for something standard like UML diagrams for DFDs, but with tagging code to break them up into sections?
I use excel 2002 but some of my office are on 97, i want to add a small workbook open event code which works for me but debugs for the others?? The code is basically, go to a tab, on that tab and that range sort..
View 2 Replies View RelatedI have some buttons in different sheets in an excel file, each button has its own code, that is the reason I can not move the code related to each object to another location (sheet or module).
And I have one piece of code in Module1 (Auto_load) in order to execute automatically this routine every time file is opened. Inside "auto_load" routine I initialize some values of some check buttons,options buttons and positions of some objects in diferent sheets, but I can not pass the value of variables between Module and Sheet's code even when I declare as public variables and/or function.
I have the following structure: ...
I have created an Excel Add-in to create the Text file. I want to create the text file through select sheet from userform.
View 9 Replies View RelatedI have been trying many different commands to run a module from a userform, but nothing is working. I'm sure it's possible, right?
Basically, I'm trying to run modules based on a selection made via a listbox.
I got some codes defined as below and I want use a userform for and checking the process. If ı could use variable "i " in userform, my codes would work.
Sub Worksheet_Change(ByVal Target As Range)
Dim KeyCells As Range
' The variable KeyCells contains the cells that will
' cause an alert when they are changed.
Set KeyCells = Range("E3:P36")
[Code] ......
I have a Sub() in a module that sends an email to address that it retrieves from a spreadsheet.
See portion of code below
HTML Code:
Do
vaRecipient = Application.InputBox( _
Prompt:="Please add the name of the recipient such as:" & vbCrLf _
& "excel@microsoft.com or just the Staff ID.", _
Title:="Recepient", Default:=Range("I" & vaRow).Value)
Loop While vaRecipient = ""
[Code] .......
This is basically showing 3 popup boxes one after the other to verify each address,
Is it possible to either have it show an input box with 3 fields or ( what I'm currently trying) is to show a Userform . I have tried Userform12.show but it isnt working.
if its possible to have the VBA object on one screen and the VBA code on another?
I can have the spreadsheet on one and the editor on another but carnt get it to work with the objects and code.
I have a project with many textboxes on different forms. On some of the textbox_exits on some of the forms, I call a standard module that checks what the user has input. If the user needs to change the input, a msgbox appears to inform the user the info needs to be changed.
I have tried to use ControlSource, Name etc., But I cannot seem to setfocus back onto which ever textbox the input needs to be changed. I think it has something to do wih the _exit event, but not sure.
I have created a search all sheets function in VB in excel in a Module. All results are populated to a listbox in a userform.
What I want to do is, as soon as I select 1st result in the listbox, it must Jump to cell where the result was found.
If need be, I can mail you the excel sheet.
i have a userform where when i initialize i load my combo box with a range
I have a variable which = combo box value
Sub cmd click()
myval = cbo.value
unload me
End sub
How can i use or pass this variable to my standard module i.e
Sub test()
myevent = myval
end sub
I am trying to use some code similar to what i have used in one of my Modules in a Userform (The module calls this userform)
I have declared a few variables in the module:
Code:
Public LastRow As Long
Public TabLen() As Integer
Public AHUArray() As String
Public ArrayDim As Integer
and i want to try and use them in a userform (i call the userform through an bit of code that usures that the other subs that assign values to the variables have been used so there should be values in the variables??i think?)
i get to this line in my userform
Code:
TabPos = TabPos + TabLen(i)
this is the first line that requires a value to be in the array and it errors: Subscript out of range
I just want a few variable that are used in a module to be available in other modules and userforms.
EDIT:the (i) is decalred in this sub within the userform. A thought occurs, the sub in the userform is a private sub, might that effect it?Also, explain Sub vs Private Sub vs Public Sub?, im new to this! the sub that fils the arrays in the module is just Sub SubName_Click()
I have a splash screen (user form) which displays fo a number of seconds. The UserForm_Activate routine uses Application.OnTime to run the KillSplash subroutine, which is defined in Module1. Thing is, I would like to move the "KillSplash" routine to the UserForm module. What should be the full name of KillSplash I need to pass to OnTime? What "trick" do I use to make "KillSplash" visible to Application.OnTime?
View 9 Replies View RelatedI created in module custom toolbar with a button, see the
Option Explicit
Public ctrlGUI As CommandBarControl
Sub CreateToolbar()
Dim cb As CommandBar
On Error Resume Next
Application.CommandBars("Cust").Delete
On Error Goto 0
Set cb = Application.CommandBars.Add( Name:="Cust", temporary:=True)
With cb
.Visible = True
Set ctrlGUI = .Controls.Add(Type:=msoControlButton, temporary:=True)
With ctrlGUI
.FaceId = 3205
.Style = msoButtonIcon .............
I would like the users to be able to exit the whole module via double clicking the form. When the form is double clicked, the double click event appears and I am wondering how to put code into this procedure which exits the whole module.
View 3 Replies View RelatedI have a macro that when it runs presents a form that gives the user an option to skip the calculations or continue. If they click Skip then it continues the 'Next CE' . My problem is I can't get the Boolean value to pass from the form to the macro. Here is what I have
The main macro
Sub Dividend_MF()
For Each sh In ActiveWorkbook.Worksheets( Array("G&I", "Growth"))
For Each ce In sh. Range("a5:a" & sh.Range("a65536").End(xlUp).Row)
If Not IsEmpty(ce) And Not (IsError(ce.Offset(0, 56))) Then
If ce.Offset(0, 56) = "X" Then
I located combobox on userfom and don't see it in the module.
View 7 Replies View RelatedI m trying to compute the mean and standard deviation for the following output:
Private Sub RunMCSimButton_Click()
'Sub created so that once the macro button is pushed, it outputs a specified number
'of FTSE 100 values and the equivalent binary payoffs.
Dim Kt As Double
Dim q As Double
Dim r As Double
Dim IndexBetValue As Double
Dim SampleSz As Long
Dim IndexSim() As Double
Dim Cnt As Long
Dim Payoff() As Double
'All the relevant variables have been defined.
'Read the parameter values from the required cells.
With Me.Range("d4")
Kt = .Cells(1, 1).Value
q = .Cells(2, 1).Value
r = .Cells(7, 1).Value...........................................
As you can see from the code, by pressing the macro button a list of FTSE 100 values and binary payoffs are produced and outputted into the spreadsheet. What I need help on is writing a piece of code that, also on the click of the macro, will output the mean and standard deviation of these values in specified cells, e.g. C10 mean and C11 SD.
I am trying to pass a string array into a form. I have added a member string array to the form, and a property to "Let" the array in the the member array.
Private sFormString() As String
Property Let FormString(value() As String)
sFormString = value
End Property
I can pass a string in using a procedure:
Sub StringArrayTest1()
Dim TestString() As String
Dim frmString As FString
but I cannot "modulate" the code, or else I get an internal error (error 51). I.e. this code doesn't work:
Sub StringArrayTest2Mod(TestString() As String, frmString As FString)
frmString.FormString = TestString
End Sub
Sub StringArrayTest2()
Dim TestString() As String
Dim frmString As FString
Set frmString = New FString
Redim TestString(1 To 2)
TestString(1) = "Cat"
TestString(2) = "Dog"
Call StringArrayTest2Mod(TestString, frmString)
End Sub
Does anyone know why this happens? Obviously, in the example code its not an issue, but the application I'm using this for is more complex, and some modulation here would be good.