This is a shot in the dark. I have a workbook with 12 sheets, one for each month of the year. Each month is divided into the different weeks of the month. For example sheet January is divided into:
Week 1: 1/1/12 through 1/7/12
Week 2: 1/8/12 through 1/14/12
and so on:
I would like my workbook to open on the cell containing the date range for that particular date.
For example, if I open the workbook on 1/10/12 I need the workbook to open on the cell range that contains Week 2: 1/8/12 through 1/14/12.
I have a work book with many sheets and staff continue to mess this up so I would like to know how I can have a specific sheet called Instructions open when this workbook is opened preferably no macro's is this possible
Need to have a particular workbook open at a specific time...
I wrote this and placed it in a Personal.xls module, did not run automatically. I then placed the 2nd SUB() in the "This Workbook" and nothing. Where or how is the proper way to run this...
---------------------------- Sub Open_IndexAnalysis()
Workbooks.Open Filename:="e:Index Analysis.xls"
End Sub ------------------------------ Sub Run_OpenIndexAnalysis()
Problem: I want a macro to detect if a workbook is open so I can skip the workbook and move onto the next item. I do not want the user to be prompted in any way. I do not want the workbook to be shared. I simply want to pass over the workbook (but be aware I have passed it over).
--Long Version-- About forty team members have their own workbooks and at day’s end the team leader uses a macro to poll each team member’s workbook in turn to gather work results. When gathering these results the macro also needs to write some admin data to each workbook.
I am aware of the workbook sharing option in Excel, but I am wary of using it. It is not a show stopper if a team member’s workbook is already open and work is not gathered on a particular day – we’ll get it the next day. I just need to be able to trap the event and manage it. The central command I use to access a team member’s workbook is :
I want a specific workbook to be always on manual but when I open other workbooks I want them to remain on automatic even though the first workbook is set on manual through vba code. Is that possible to be done?
This is the code I run:
Private Sub Workbook_Activate() With Application .Calculation = xlManual .MaxChange = 0.001 .CalculateBeforeSave = False
[Code] .....
I know that Application. Calculation refers to all open workbooks but I don't know the code to specify the manual calculation to this workbook only while others are open.
The following code is supposed to open a workbook, find txtVinput.value and put todays date (now()) in column C.
it doesn't generate any errors, but it doesn't add the date either. I'd post the file, but its just over the limit and I don't want to get into trouble (50K)
The whole prog is a userform that the operator enters a receipt number and it posts to another workbook, with the date. The operator also has the option to insert a date when the paperwork is returned. This is the part that is causing me trouble.
Sub InsertReturnInDatabase() Application. ScreenUpdating = False Application.EnableEvents = False
I have a list that show file names and when the necessary works on these files were completed, but the powers that be want more. I have been asked to add two more columns, one showing when the file was last opened and the other when it was last modified.
Is it possible to do this through VBA without having to open the files that are listed? If so I will run the macro when the workbook is first opened.
I have created a spreadsheet some time ago and have been asked to improve on it but I'm rusty with VBA.
I have an automated ordering system that saves each sent order as the date e.g "05-04-2013.xls" but the management team want a graph with the data for the last 4 weeks compared. I have created a seperate workbook called "consumables report.xls" which has a column with the products listed followed by columns "Quantity" and "cost" which is repeated for the 4 weeks of the month.
I want to add a button to prompt the user to choose the saved order e.g "05-04-2013.xls" (all orders saved in same directory) to copy and paste the quantity and cost columns (c8,D69) into "consumables report.xls". I got this to work earlier but it would only paste the formulas and not the values. So I need
A prompt to open workbook Copy range (c8,d69) Close work sheet Paste special .value (c8,D69)
I dont care if it has to open the workbook to copy the data as this will only be used once a month so it dosnt matter how slow the code is.
I'm trying to create a workbook which has dates in column B, starting with row 10. I'd like to have a code which will hide the rows if the date is less than today upon workbook open. This would need to apply to worksheet1 only.
I have Monthly sales sheets that import my cash register data into them. I wanted to set them up to do everything without being there. So I have my task manager open excel at 9:30pm everyday and it runs the macro to import the data into the correct day of the month. Here is the workbook
open macro-
Private Sub Workbook_Open() Dim dTime As Date dTime = Time If dTime >= TimeValue("9:30 PM") And _ dTime < TimeValue("9:40 PM") Then ImportData End If End Sub
This is in my July spreadsheet only. So is there a way to make it know which month spreadsheet to open on the 1st of the month? So come August 1st it will automatically open the August workbook and input the data for the first day? By using the date?
I have a presentation that I open from a short-cut. After the "Welcome Page" is opened, I want to open a second workbook in a new instance of Excel after 4 seconds.
I think that I can open the new instance of excel, but I don't know how to activate the macro after 4 seconds.
I'm sure there is a function someplace for this that can be used in a macro.
Then, after the second Workbook is opened, I want the Welcome Page "Workbook" closed, leaving the second Worbook open.
My Splash screen opens a few seconds after the workbook has loaded. Is there a way to make the workbook open minimzed until the the splash screen closes then open properly? What I trying to say is that only the splash screen is visible until it closes.
I would like to write a Sub that will see if a workbook is open and if it is not then open it. I know how to have a macro automatically open a workbook, but I run into problems when the macro runs and tries to open an already opened workbook.
Create a full copy of an open workbook (eg. activeworkbook MyFile.xls) using VBA, with the new copy (eg Book1.xls) open as well ,without having to save a copy first then open it ?
I did a macro on my mac to transfer a sheet from one workbook to another worbook. It works very well when the destination workbook is open. Therefore I wanted to add some piece of code to check if the destination workbook is open. If not then I wanted the macro to open it before tranfering the sheet. Here is the code I´m using for tranfering the sheet
Sub Transfer_Sluttet() If ActiveSheet.Index <> Sheets.Count Then Application.DisplayAlerts = False Set ws = ActiveSheet Sheets(ws.Index + 1).Delete ws.Move Before:=Workbooks("Sluttet.xls").Sheets("sheet2") 'Moves active sheet to beginning of named workbook. 'Replace Test.xls with the full name of the target workbook you want. Application.DisplayAlerts = True End If End Sub
This is the type of macro I useually use on my pc to check if a workbook is open and if not then open it
If IsWorkbookOpened("Filename.xls", "C:Documents and ..................
I have data that daily needs to be refreshed and printed to pdf.
I figure the simplest way to do this would be to task schedule the workbook to open daily. Then on open it will refresh the data, print it after all data has been refreshed and close the workbook.
I set it up originally without the need to print so I have all the queries set to refresh when opening the file, however when I now try and put the code to print to pdf on the workbook open event it runs before the queries are finished running. (Query notes: queries were created through Microsoft query, and are accessing a MySQL database queries set to refresh when opening the file queries set to enable background refresh).
Code: Sub CopyRow()' 'Copies row to new sheet, highlights it, marks column 'A' as copied. ' Dim cCell As Range Set cCell = Selection.Cells(1, 1) Selection.Copy Sheets("Sheet2").Select Rows("2:2").Select
[Code] .....
Is it possible to modify it to paste into a different workbook called c:filesDestination.xlsm, instead of the existing workbook (Source.xlsm)? The destination sheet name is the same (Sheet2). It's OK if both workbooks are open at the same time.
I'm trying to figure out a way to find a specific sheet in a workbook that does not contain the macro. Within the macro I have a cell which holds the name of the specific sheet I would like to find but I can't get it to work for some reason...
'Dim officen As Integer 'Dim thiswb As Workbook
officen = Range("A2").Value Set thiswb = ActiveWorkbook ' Open the Active Info file Workbooks.Open "C:My DcoumentsActive 20080616.xls", , , , "xxxxxx" ' Dim sourcewb As Workbook Set sourcewb = Workbooks.Open"Active 20080616.xls"
is it possible to write vb code to open the workbook, scroll through everysheet? extract the values from each worksheet?
let's just say, I only know the workbook name, but not the sheets of the name inside. So the vb code could scroll through every worksheet without knowing the worksheet name, only the workbook name(workbook.xls)
This is pretty basic I just don't know what command to use. I have a macro that's supposed to copy data from one workbook to another, it works fine but In the macro it open the other workbook then closes it. I would like the macro to not reopen the second workbook if it is already open (since reopening causes it to lose the newly updated info). I think it can be done with a If command but I don't know which tried the following: If workbooks("M:/database") Is Open but of course 'is open' doesn't work, but can anyone tell me what to use instead.
I have set up a workbook (wb2) that has external references to another workbook (wb1). All is good and works fine when you open the 2 files from windows explorer. I have then put a hyperlink to wb2 from wb1. When you click on this link the file opens but throws up errors saying some of the named ranges cannot be found?
I am trying to copy the emf image object from "Book1" into the "test" workbook whilst the test workbook is open and Book1 is closed. The code I have put together currently sort of works, I mean that it copies the text data over but does not copy the object which is what I require.
