VBA Vlookup Tabs With ABC In Name
Sep 21, 2009
There seems to be oodles of vlookup VBA queries on here and i've spent a few hours reading, and learning, but this twist seems to be missing. Apologies if Ive missed it.
I have one spreadsheet which will contain a varying number of worksheets on a monthly basis.
Worksheet names will also vary but will always contain abc somewhere in the name.
I have one "destination" worksheet which needs to receive the values from whichever abc worksheet is applicable.
I'd like the vlookup in worksheet SER01 to look up values in its column A, compare them to column K in the abc worksheets and give me the value from column AD in the abc worksheet and deposit it in column H in the SER01 worksheets.
For another challenge - this is an outside chance only but the additional twist is that sometimes my lovely colleagues move the columns - so the columns in the abc worksheets may NOT ALWAYS be K and AD - but will ALWAYS be in the spreadsheet somewhere. As i say this is a now and again and i dont' know if its possible to search all columns in a range of worksheets... is that too much for the PC - will it fall over
View 9 Replies
ADVERTISEMENT
Jan 15, 2014
I am trying to run a VLookup across 19 tabs. The formula and result are below
=Vlookup(2255099,INDIRECT("'"&CENTERS&"!A5:R395""),13,0) returns a #VALUE
When I evaluate the formula, the result is:
=Vlookup(2255099,INDIRECT("'"&#VALUE&"!A5:R395""),13,0)
Does the #VALUE where CENTER was mean there is a problem with my Named Range?
View 8 Replies
View Related
Mar 20, 2009
There are 4 tabs titled: xy,xx,yx and ss. On tab ss; in cell A1, there's a formula that gives the sheet name of one of the remaining 3 tabs (so depending on a few conditions that are not important for this problem, its value is going to be xy, or xx, or yx.)
what I want to do is (say on cell A2), create a vlookup formula whose table array should go to one of the 3 tabs depending on the value of A1. So, if A1=xy , then, I want the table array to be ,xy!a1:b90, ..
However, I cant use an if clause (say: if(a1="xy",vlookup(..,xy!a1:b90,2,false),if(a1="xx",vlookup(..,xx!a1:b90,2..........) because I actually have 20 tabs and I dont want to go nuts with a bunch of nested expressions.
View 4 Replies
View Related
May 13, 2014
I have one tab for every month of the year plus a pivot table and summary page. Each month has 100+ products produced. In any given month the products could change, so a product could be on multiple sheets. I have used the pivot table to eliminate duplicates and create my summary sheet. Now I am trying to lookup the product description across the tabs using and if(isna(vlookup, but this does not seem to be able to handle more than a few tabs at once.
The second problem is I need to add the the production from each month for all the products produced in a year to the summary tab. I do not think the sumif function works here (or I am doing it wrong). I thought about an if(isna(vlookup +if(isna(vlookup and so on but do not think that will work either.
View 9 Replies
View Related
Aug 21, 2009
I am using this for my sheet =VLOOKUP(B1,master!$A$1:$C$45870,2,0)
I have added a tab "masterA" with 47K lines and a tab "masterB" with 38k lines.
How do I get excell to start with master--if it does not find it there - go to masterA --and if needed go to masterB? ( checking in that order )
View 9 Replies
View Related
May 21, 2007
I have imported a table from my access database. sadly, it has over 65536 rows. I am going to have to break table down into mulitiple sheets on excel. Using a VLOOKUP formula normaly like this. =VLOOKUP(E5,MHIFUPK,5,0)
where E5 is my target,MHIFUPK is the sheet with the table array, and 5 is the price of E5. Now I will have multipe sheets, and I need to be able to refreance all of them in order to find E5. Anyway to do this besides upgrading to 2007, (wish I could get the company to upgrade)
View 2 Replies
View Related
Oct 16, 2012
I am trying to have a Vlookup Macro to add all the prices for a certain product in different tabs.
VB:
Private Sub CommandButton1_Click() 'Generate Info Button
Dim ws As Worksheet
Dim ISSUEPRICE As Integer
Dim RESULT As Integer
Dim sheet As Worksheet
For Each ws In ThisWorkbook.Worksheets
[Code] ......
View 3 Replies
View Related
Jun 26, 2012
I need a formula that will allow me to look up data on different worksheets. I have 5 worksheets (1 summary, and 4 with raw data). The raw data tabs all have the exact same number of rows and columns but the data is from a different region. I want the user to be able to select from a drop-down menu which region they want summary data tab to pull from using a vlookup formula.
For example, I have five tabs in my workbook: Tab1) Summary Tab which needs to pull the data from the other four tabs, Tab2) named "West", Tab3) named "East", Tab4) named "South", Tab5) named "North". Using a drop-down list, I want to be able to select either West, East, South or North and have the vlookup formulas look at the corresponding tab for the data. So, in my example, if I select "North" from the drop-down menu, I want the vlookups to pull data from the "North" tab etc. I do not want to use PIVOT TABLES for this.
View 1 Replies
View Related
Apr 29, 2014
I have 2 inventory reports: what my store has and what my supplier has. I need to copy Tab1:K# to Tab2:T# provided that Tab1:A#'s contents match Tab2:A#'s contents. The A column represents the SKU of the item, but there is a difference in the amount of SKU's in each (my store sells ~6,000 items, supplier has ~10,000 items), so it's not as simple as sort by column A and copy pasting column K to column T.
For instance:
On Tab 1, A2's value is [1], K2's value is [9.38].
On Tab 2, A70's value is [1], K70's value is blank, but I need it to be [9.38], to match Tab 1's respective SKU.
I almost thought I had it figured out with VLOOKUP, but I cant seem to get it right... It doesn't reference the correct number.
Screenshots for reference
First tab, from the wholesaler: [URL]
Second tab, store's stock: [URL]
View 2 Replies
View Related
Sep 22, 2012
I have been trying to get Excel (2007) to change the colour of tabs to match other tabs in the workbook
Using this code I get the colour code of the current tab
Code:
x = ActiveSheet.Tab.ColorIndex
But when I use this value in a procedure like this:
Code:
ActiveSheet.Tab.ColorIndex = x
The tab is a different colour!
View 3 Replies
View Related
Oct 12, 2009
I have a summary page that includes the titles for each tab within the excel 2003 workbook. I want to use the names of the tabs in the summary page and create it into a formula to lookup fixed cells within the various tabs. Sorry for not uploading an excel doc but I was at work earlier and the thread did not load for some reason, so I am reposting it.
View 3 Replies
View Related
Jun 25, 2008
I'm using Excel '03SP2 on Win 2000sp4. I believe I have a case where old tabs originally written in Excel ' 97 behave differently than new tabs in the same workbook, which is saved in 2003 format.
Specifically, the formula ="PLAN" & budyr-1 where budyr is a named range on a different tab containing 2008 . This formula yields PLAN 2007 on a new tab and #VALUE! on an old tab.
How do I get Excel to update the old tabs so that they behave as Excel 2003 tabs?
View 8 Replies
View Related
Aug 18, 2009
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
View 3 Replies
View Related
Oct 5, 2009
I have a sheet using VLookup to find EMail and Web addresses. I can get the address to show up but not as an active URL address. Is it possible to have the address "active" so I can click on it and activate the EMail or Web Site?
View 5 Replies
View Related
Oct 29, 2012
I'm trying to do a Vlookup on a file that gets automatically downloaded to the computer from a website. The data is in lots of different data sets, like so:
Loans to countries
Mar
Apr
May
Jun
Loans to banks
Mar
Apr
May
Jun
Every month a new row of data gets added to each table, meaning the start and end cells of the array also shift each time.
View 4 Replies
View Related
Jul 13, 2009
I'm currently trying to vlookup the same data from 2 different sheets. Here is the code i've tried.
View 4 Replies
View Related
Jun 9, 2009
I’m trying to develop a workbook which holds monthly data on loan information. It tracks the interest and balance on the loan. I want the first page to have a table displaying the interest payments for every individual tab. When I was brainstorming the idea, I was considering a sort of Vlookup function to find the tab the account is on and then a further function, possibly another vlookup which connects the month to that month’s interest payment. Can anyone help me figure this out?
The attached spreadsheet is obviously simplified, there are well over 30 tabs. But I would like it to, ideally, search the account number column, search the workbook for that account number, and then when on that page use the month at the top of the first page and retrieve the interest payment and put it back in the cell. It’d also be great if the formula can be transferred between workbooks. I’m not sure if that makes sense; basically if I were to copy that worksheet into the next months book, I would like that the formula read those tabs instead of becoming obsolete due to references from the first workbook.
View 14 Replies
View Related
Jul 24, 2009
I have data in a pivottable which I want to compare with another table. The lastcolumn+1 of the pivottable needs to get data from another table. I have this for an example:
View 5 Replies
View Related
Sep 17, 2008
I have a spreadsheet (Need Data.xls) that needs to be filled out with a couple columns of data.
This data lays within 338 spreadsheets which have many items and may only have 2, or 3, or 50 that belong on my Need Data.xls spreadsheet.
I have a tab in Need Data.xls named "DIR" which has a list of 336 excel files that need to vlookup'd into.(not a separate file) They're all setup with this format:
View 14 Replies
View Related
Dec 22, 2009
Is there anyway to have tabs within tabs? Right now there are only two layers...workbooks and worksheets within workbooks (tabs). Is there anyway to have more than two layers?
So right now:
1) Workbook
a. Worksheet
b. Worksheet
Can we get to:
1) Workbook
a. Worksheet
i. ?
b. Worksheet
i. ?
ii. ?
No?
View 8 Replies
View Related
Oct 13, 2008
Is there a way to group tabs? For instance, I have 3 tabs that go with one section and 3 with another and so forth. Is there a way to group them? Also, can you change their color?
View 3 Replies
View Related
Nov 25, 2008
Is it possible to Sum across sheet tabs, if so how?
View 8 Replies
View Related
Feb 5, 2009
if there is a quick way to add any number of tabs to a spreadsheet.
ie one particular spreadsheet i need to have 32 sheets (tabs) but am getting seriously bored to right click insert worksheet time after time. there must be a quicker way?
View 6 Replies
View Related
Oct 3, 2009
i have included an example spreadsheet, hopefully someone can help me
i want a print button that when pressed with always print 'tab 1' and will print 'tab 2 3 4 etc... if a certain cell in 'tab 1' is greater than zero
please see my example spreadsheet and hopefully my problem will become clear if ive not explained myself very well.
View 7 Replies
View Related
Mar 14, 2014
I am having some trouble with a handy formula I learned over this forum and its application between two tabs.
Referencing the attached workbook, the formulas in cell C6 & C7 are working for the end range I want, but the first section doesn't want to work. I'm not sure if it has something to do with the quotes (") or not.
View 7 Replies
View Related
Jun 19, 2009
I currently have the following code below set up which sends out two seperate emails to the same person out of excel. I'm trying to combine this to only send out one email with both tabs:
View 2 Replies
View Related
Dec 30, 2009
I have a workbook where each tab represents a 'base.' You can select which base to view by selecting an option from a drop down box on a menu page.
The data for each base is of a confidential nature so I would like to password protect each tab so that it asks for a password BEFORE the page opens. I don't think Excel has the functionality to do this unless I make the pages 'Very Hidden'?
View 8 Replies
View Related
Dec 9, 2005
I have a workbook with several tabs. The top tab is the main spreadsheet
were I enter all my gathered data. The other tabs are the same spreadsheet,
the same data, but broken out by specific building.
Right now, I enter the data (alpha and numeric) into the main spreadsheet,
then manually copy/paste it to the respective sub-level spreadsheet.
I can specify the "IF" part of the line item that would identify which sheet
to copy it to, but is it possible to have a "THEN copy and paste [these
cells]" to the other spreadsheets?
View 14 Replies
View Related
Feb 1, 2012
How can I get my tabs to collaborate. If I make a change to the main tab I would like it to carry out through the rest of the tabs. Like the table format and formulas.
View 1 Replies
View Related
Jan 23, 2013
I have a file with around 20 tabs. Can I merge all the tabs into just one tab?
View 1 Replies
View Related
