Vlookup; Moving To Tabs
Mar 20, 2009
There are 4 tabs titled: xy,xx,yx and ss. On tab ss; in cell A1, there's a formula that gives the sheet name of one of the remaining 3 tabs (so depending on a few conditions that are not important for this problem, its value is going to be xy, or xx, or yx.)
what I want to do is (say on cell A2), create a vlookup formula whose table array should go to one of the 3 tabs depending on the value of A1. So, if A1=xy , then, I want the table array to be ,xy!a1:b90, ..
However, I cant use an if clause (say: if(a1="xy",vlookup(..,xy!a1:b90,2,false),if(a1="xx",vlookup(..,xx!a1:b90,2..........) because I actually have 20 tabs and I dont want to go nuts with a bunch of nested expressions.
View 4 Replies
ADVERTISEMENT
Sep 23, 2013
I have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.
View 5 Replies
View Related
Jun 21, 2007
I have created a simple button that I want to take me to a certain number of tabs.
I have about 24 tabs. I can't see them all. I create a button that will take me to a specific tab from my main page. This works fine till I rename the tab. I want the code to read a sheet number or something like that instead of the specific name.
Sheets("JobList").Select
Range("A8").Select
This works till i change the name "JobList"
View 6 Replies
View Related
Mar 5, 2013
Shortcuts for moving tabs to different files. A copy of the tab, I mean.
View 1 Replies
View Related
Jul 24, 2007
i have data that has several bits of information for each different account number.
is there a way of writing a macro to transfer the information from the main sheet onto different sheets automatically titled for each of the different account numbers?
ie. Account Cost
E1 £100
E1 £200
E2
E2
etc
i want different sheets for the info next to each of the account numbers
View 9 Replies
View Related
Jan 15, 2014
I am trying to run a VLookup across 19 tabs. The formula and result are below
=Vlookup(2255099,INDIRECT("'"&CENTERS&"!A5:R395""),13,0) returns a #VALUE
When I evaluate the formula, the result is:
=Vlookup(2255099,INDIRECT("'"&#VALUE&"!A5:R395""),13,0)
Does the #VALUE where CENTER was mean there is a problem with my Named Range?
View 8 Replies
View Related
Sep 21, 2009
There seems to be oodles of vlookup VBA queries on here and i've spent a few hours reading, and learning, but this twist seems to be missing. Apologies if Ive missed it.
I have one spreadsheet which will contain a varying number of worksheets on a monthly basis.
Worksheet names will also vary but will always contain abc somewhere in the name.
I have one "destination" worksheet which needs to receive the values from whichever abc worksheet is applicable.
I'd like the vlookup in worksheet SER01 to look up values in its column A, compare them to column K in the abc worksheets and give me the value from column AD in the abc worksheet and deposit it in column H in the SER01 worksheets.
For another challenge - this is an outside chance only but the additional twist is that sometimes my lovely colleagues move the columns - so the columns in the abc worksheets may NOT ALWAYS be K and AD - but will ALWAYS be in the spreadsheet somewhere. As i say this is a now and again and i dont' know if its possible to search all columns in a range of worksheets... is that too much for the PC - will it fall over
View 9 Replies
View Related
May 13, 2014
I have one tab for every month of the year plus a pivot table and summary page. Each month has 100+ products produced. In any given month the products could change, so a product could be on multiple sheets. I have used the pivot table to eliminate duplicates and create my summary sheet. Now I am trying to lookup the product description across the tabs using and if(isna(vlookup, but this does not seem to be able to handle more than a few tabs at once.
The second problem is I need to add the the production from each month for all the products produced in a year to the summary tab. I do not think the sumif function works here (or I am doing it wrong). I thought about an if(isna(vlookup +if(isna(vlookup and so on but do not think that will work either.
View 9 Replies
View Related
Aug 21, 2009
I am using this for my sheet =VLOOKUP(B1,master!$A$1:$C$45870,2,0)
I have added a tab "masterA" with 47K lines and a tab "masterB" with 38k lines.
How do I get excell to start with master--if it does not find it there - go to masterA --and if needed go to masterB? ( checking in that order )
View 9 Replies
View Related
May 21, 2007
I have imported a table from my access database. sadly, it has over 65536 rows. I am going to have to break table down into mulitiple sheets on excel. Using a VLOOKUP formula normaly like this. =VLOOKUP(E5,MHIFUPK,5,0)
where E5 is my target,MHIFUPK is the sheet with the table array, and 5 is the price of E5. Now I will have multipe sheets, and I need to be able to refreance all of them in order to find E5. Anyway to do this besides upgrading to 2007, (wish I could get the company to upgrade)
View 2 Replies
View Related
Aug 23, 2012
I'm working on an excel report that handles reporting for a large number of people. Another person at work is doing the VBZ coding, and I'm doing the formulas that aggregates the data. which has led to an interesting problem whenever I use a vlookup. I copied the sheets with the formulas from the test document I had been working on to an updated version. And all the vlookups automatically adjusted themselves to reference the document they had been created in. I had also moved over the tabs they were supposed to reference, but they keep looking at the old document. I spent an hour removing the references last night, but I don't want to do it again when I get the final product.
How to get excel to copy a formula EXACTLY as written, and not att in the name of the original document?
It should say
=VLOOKUP($A438,totals!$A$1:$AH$63,32,FALSE)
and instead it says
=VLOOKUP($A438,'[reporting formulas.xlsx]totals'!$A$1:$AH$63,32,FALSE)
View 2 Replies
View Related
Oct 16, 2012
I am trying to have a Vlookup Macro to add all the prices for a certain product in different tabs.
VB:
Private Sub CommandButton1_Click() 'Generate Info Button
Dim ws As Worksheet
Dim ISSUEPRICE As Integer
Dim RESULT As Integer
Dim sheet As Worksheet
For Each ws In ThisWorkbook.Worksheets
[Code] ......
View 3 Replies
View Related
Jun 26, 2012
I need a formula that will allow me to look up data on different worksheets. I have 5 worksheets (1 summary, and 4 with raw data). The raw data tabs all have the exact same number of rows and columns but the data is from a different region. I want the user to be able to select from a drop-down menu which region they want summary data tab to pull from using a vlookup formula.
For example, I have five tabs in my workbook: Tab1) Summary Tab which needs to pull the data from the other four tabs, Tab2) named "West", Tab3) named "East", Tab4) named "South", Tab5) named "North". Using a drop-down list, I want to be able to select either West, East, South or North and have the vlookup formulas look at the corresponding tab for the data. So, in my example, if I select "North" from the drop-down menu, I want the vlookups to pull data from the "North" tab etc. I do not want to use PIVOT TABLES for this.
View 1 Replies
View Related
Apr 29, 2014
I have 2 inventory reports: what my store has and what my supplier has. I need to copy Tab1:K# to Tab2:T# provided that Tab1:A#'s contents match Tab2:A#'s contents. The A column represents the SKU of the item, but there is a difference in the amount of SKU's in each (my store sells ~6,000 items, supplier has ~10,000 items), so it's not as simple as sort by column A and copy pasting column K to column T.
For instance:
On Tab 1, A2's value is [1], K2's value is [9.38].
On Tab 2, A70's value is [1], K70's value is blank, but I need it to be [9.38], to match Tab 1's respective SKU.
I almost thought I had it figured out with VLOOKUP, but I cant seem to get it right... It doesn't reference the correct number.
Screenshots for reference
First tab, from the wholesaler: [URL]
Second tab, store's stock: [URL]
View 2 Replies
View Related
Sep 22, 2012
I have been trying to get Excel (2007) to change the colour of tabs to match other tabs in the workbook
Using this code I get the colour code of the current tab
Code:
x = ActiveSheet.Tab.ColorIndex
But when I use this value in a procedure like this:
Code:
ActiveSheet.Tab.ColorIndex = x
The tab is a different colour!
View 3 Replies
View Related
Oct 12, 2009
I have a summary page that includes the titles for each tab within the excel 2003 workbook. I want to use the names of the tabs in the summary page and create it into a formula to lookup fixed cells within the various tabs. Sorry for not uploading an excel doc but I was at work earlier and the thread did not load for some reason, so I am reposting it.
View 3 Replies
View Related
Jun 25, 2008
I'm using Excel '03SP2 on Win 2000sp4. I believe I have a case where old tabs originally written in Excel ' 97 behave differently than new tabs in the same workbook, which is saved in 2003 format.
Specifically, the formula ="PLAN" & budyr-1 where budyr is a named range on a different tab containing 2008 . This formula yields PLAN 2007 on a new tab and #VALUE! on an old tab.
How do I get Excel to update the old tabs so that they behave as Excel 2003 tabs?
View 8 Replies
View Related
Aug 18, 2009
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
View 3 Replies
View Related
Oct 5, 2009
I have a sheet using VLookup to find EMail and Web addresses. I can get the address to show up but not as an active URL address. Is it possible to have the address "active" so I can click on it and activate the EMail or Web Site?
View 5 Replies
View Related
Oct 29, 2012
I'm trying to do a Vlookup on a file that gets automatically downloaded to the computer from a website. The data is in lots of different data sets, like so:
Loans to countries
Mar
Apr
May
Jun
Loans to banks
Mar
Apr
May
Jun
Every month a new row of data gets added to each table, meaning the start and end cells of the array also shift each time.
View 4 Replies
View Related
Jul 9, 2014
Let's say there's a couple row:
[Code].....
Here's a column I will be pasting:
[Code] ....
If I want to "Insert Copied Cells" in place of Yellow on Row1 and shift the cells down, the rows would look like this:
[Code] .....
How can I make it so the rows would be the following during such a paste:
[Code] .....
This is because I have hundreds of cells that I need to insert as columns all the while pushing complete rows down. If you're trying to understand why, it will be for some online marketing purpose as demonstrated here in this sheet: [URL] ...
View 7 Replies
View Related
Feb 9, 2006
I am unaware how to set up a combo box to allow users to move from the combobox to the next combo box . tab or enter? The way we do it know is we click with the mouse from combobox.
View 3 Replies
View Related
Mar 5, 2007
I have a workbook with 2 work sheets, when a row has "yes" typed into the "accepted bid" column I would like that row to be placed into the second sheet in the order in which it was entered "yes"
so, if on the first sheet a row, lets say row 10 had "yes" typed into it but row 10-15 on the second sheet had something in it already, the info would have to be placed in the next available row.
I have approximatley 20 rows on the first sheet and the ones that transfer to the second can just be added to it as needed.
View 14 Replies
View Related
Mar 24, 2014
I want to move the vales from F8 to F9, F9 to F10, F10 to F12 (there is a space)and so one. I would like it to be triggered by changing the value in F8 if possible. I have tried a good few ways, sometimes I get a stack 28 error.Zones.xlsm
View 6 Replies
View Related
Apr 30, 2009
Is there a way to write VBA code that can reference a range of data that may be moved on the spreadsheet by the User? For example, if I write VBA code to reference a range of data such as:
View 2 Replies
View Related
Jul 15, 2009
I need to know the function to move a named sheet to the end of the list so its the last sheet in the workbook. Worksheets("xxxx").Copy After:=Worksheets(?)
Im copying a worksheet and want to move the new sheet to the end but I dont know how to finnish it. I tried to do.
name3 = Worksheet.count + 2
Worksheets("xxxx").Copy After:=Worksheets(name3)
but I get an error and cant debug it.
View 2 Replies
View Related
Oct 7, 2013
I am very new to macros I have a list of data all in column D. I need the macro to go through that whole column and for any cell with more than 50 characters stop at 50 and continue the remaining text in the cell below. This can all happen in column E.
View 8 Replies
View Related
Dec 8, 2006
this User Defined Function (UDF) would operate on any specified data (ignoring blanks) over a range. Inputs to the UDF are range and period.
View 9 Replies
View Related
May 23, 2007
I have a matrix A with 12 rows and 10 columns. My problem is if in the cell(i,j) there is data then the same data should appear in a similar matrix B, but in a cell which is 15 cells behind the cell(i,j).
That is it should start counting upwards from cell (i,j) in B and once it reaches the top of the matrix it should continue counting from the bottom of the immediate left column and go up. When it reaches the 15 cell from cell(i,j) in b, it should print there the value that was in cell(i,j) of A.
View 9 Replies
View Related
Oct 10, 2007
I have code broken out between two different modules due to size limitations in a single module. I'm not able to figure out how to move to the second module after running the first module. I've tried something like this:
Sub FirstModule()
'Code
'Code
'Code
SecondModule
End Sub
Sub SecondModule()
'Code
'Code
'Code
End Sub
I'm getting an error that says "Compile error: Expected variable or procedure, not module". I understand that it's not allowing me to use the name of a module as a procedure, but I can't find any information on how to call the second module.
View 9 Replies
View Related
