I am using a For Each Next to cycle through a list of names, check certain conditions and then will be adding a further lookup (instead of Result = Result+1), but all I get is #Value!
Function maxbarometer(Name As String, Round As Integer, NameList As Variant, RoundRange As Range, RoundRangeTwo As Range)
Dim Roundname As String
Dim Result As Double
Dim NameColRound As Integer
Dim ListObject As Variant
Roundname = "Round " & Round
NameColRound = Application.WorksheetFunction.Match(Name, RoundRange, 0)
For Each ListObject In NameList
If ListObject.Value = Name Then
Result = Result
ElseIf Application.WorksheetFunction.VLookup(ListObject.Value, RoundRange2, NameColRound, False) = Roundname Then
Result = Result + 1
End If
Next
maxbarometer = Result
End Function
when i try to get the final row witht the following:
KROGrow = Cells(65536, 1).End(xlUp).Row
i am getting a row that is consistently 27 rows off of when i manually do control up? i am pasting data from and existing workbook into a newly created workbook in the sub. i would assume that since the destination is new that they would never be any data in this?
I am trying to use the Vlookup function to return State name based on the corresponding state code.
I have the list of State along with the Codes in adjacent sheet, arranged in ascending order. I am using the Vlookup function to list the State name based on the State code.
Vlookup function: Vlookup(A4,Sheet2.A2:B51,1)
This function returns me a wrong value. It gives "Arkansas" for the state code "AZ", when it should be Arkansas.
Also, if I add "FALSE" as a 4th argument, it returns "#N/A".
I have the following formula: IF(SELL_INVESTMENT = "YES" , 1,2) It returns not 1 or 2 but 0. The worksheet contains over 1000 cells. Trace Precedents verifies that the formula evaluates the correct cell and that it contains "yes". I created a very simple worksheet to test the formula and here it correctly returns 1.
When copying data from a website to excel, excel recognizes the dates wrongly.
About half of the dates he sees as: DD/MM/YYYY, while it should be: nothing/MM/DD.
For example: The cell contains the date: 01/04/2029 (The first of April, 2029)
While it should actually be: 04/29 (The 29th of April, no year!)
For all dates it starts with the 1, followed by a month, followed by a year (which consists of the year 2000 + the actual day), which is totally wrong.
About the other half of the cells, it just contains text with the month and the day (which are correct), but excel doesn't recognize this as a day.
For example: The cell contains the text: June 12
When I set the cell format to date (or any other format for that matter), nothing happens, so excel does not see this as a date.
I'm trying to figure out an Internal Rate of Return for a spreadsheet. The answer is supposed to be: 29.42% however I'm getting 25.94%. Does anyone know what I'm doing wrong in my IRR function on the Profitability worksheet? I'm currently using Excel 2007 by the way.
I have a problem with my references when sorting in excel. I have been searching for the problem, but did not found a useful solution. I'm using excel 2003.
Let me try to explain my problem with a simple exampel.
I have a column with numbers and one with formulas pointing at these. A B 2 =A1 4 =A2 3 =A3
Now I want to sort column A, and the column B should keep pointing at the original number. So I want this: A B 2 =A1 3 =A3 4 =A2
But I get this: A B 2 =A1 3 =A2 4 =A3
This output is what I would expect if I used absolut reference($).
Using offset(B1;0;-1) will work, but I cannot use this, since I will add/delete rows and the reference is not neccessarily next to it. Plus it can be a rather large sheet.
I cannot use dynamically name definition either, because it is intended for other users, and this will be too much work for them. What I basically need is a simple formula they can enter.
My sorting is done via a VBA macro, so if there is anything I can do through macro/VBA that will be okay as well, since I can do this without the user seeing it.
I have this workbook with 10 sheets. Each sheet has macros that are called from a floating toolbar. What I am trying to do:
I want to create a msgbox that warns me when I click in a toolbar's button to call a macro that not runs in the activesheet. Something like: "This code (or macro) doesn't match (or run) with the active sheet.
as such Excel (2003) is putting in the wrong weeknumbers in my spreadsheet, for example 02/01/2006 is listed as week 0 when in fact it is week 1, how can I get it too correct this problem?
I am using the following formula, could someone explain this formula in english?
Thers no easy way to explain this other than looking at the sheet (which is attached), but basically i have a load time start time and end time. In the example in the sheet the load time is 01:00 The start time is 23:00 The end time is 23:35
Th eload took 35 mins and was not late as it is going 01:00 next morning, yet the answer it replies is 'N' which makes it show as late. Does anyone have a formula to slove this issue
The code is supposed to project review dates 1 month, 2 months and 3 months after the start date, but the first "cell offset" line on is projecting the next day instead of next month, its driving me nuts!!, the others are working fine
Code: Sub reviews() Dim cell As Range
For Each cell In Range("L1:L200") If IsDate(cell) Then cell.Offset(, 10).Value = DateAdd("m", 1, cell.Value) cell.Offset(, 11).Value = DateAdd("m", 2, cell.Value) cell.Offset(, 12).Value = DateAdd("m", 3, cell.Value) cell.Resize(, 10).AutoFill cell.Resize(, 11) End If Next cell End Sub
I was trying to explain modulus to someone and they wanted to know why you can "flip" symbols mod(-6,7) = 1 in Excel. So I got to explaining that -6 Mod 7 is the same as -6-(|-6/7|)*7 which is how you get 1.
And that's when I realized... |-6/7| = 0 not -1. Then I looked in VBA and sure enough -6 mod 7 = -6. Apparently the problem boils down to the Integer conversion. Excel is performing the integer coversion by rounding down (INT) wheras VBA appears to be using CINT.
So here is how it work out in excel: -6-(|-6/7|)*7 -6-(|-0.857142857|)*7 -6-(-1)*7 -6--7 -6+7=1
But in VBA you get -6-(|-6/7|)*7 -6-(|-0.857142857|)*7 -6-(0)*7 -6-0=-6
I have a very basic spreadsheet to calculate golfer handicaps based upon a course index. For some reason, my "LOOKUP" formula is not retrieving the data from the cell (column) next to the value I am searching...?
I'm trying to parse a text file into Excel and the date is coming out as "1940" instead of "2040". In the text file the date reads "5/14/40". I've already changed my regional setting in Excel so that if I type in "5/14/40" it is understood to be "5/14/2040". For some reason this doesn't work when I parse the data though.
The formula below was written a couple of years ago and I just discovered an error. It returns an "S" for the value 0789 when it should be a "C", (Consecutive).
******** ******************** ************************************************************************>Microsoft Excel - FL MID PLAY 4 CONSECUTIVES.xlsm___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutT215=OPQRST215078907893SSheet2 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
The macro was orininally set up for the 7 days of the week. Now I want to set it up for the 31 days of a month. It's set to pull information from a register sales journal. Here is the button macro-
Sub Button2_Click() Dim sDay As String Dim sShift As String
sDay = InputBox("Which Day? (1 For MONDAY, 2 For TUESDAY, ... 7 For SUNDAY)") Select Case sDay Case "1" sDay = "1" Case "2" sDay = "2" Case "3" sDay = "3" Case "4" ........................
I have this formula that returns a grade mark for a specific score in a test:
=VLOOKUP(D4,'Grade scale'!$A$34:$B$42,2)
using these values in the lookup table:
Low scoreGrade 0.0% U 25.0% G 35.0% F 45.3% E 55.3% D 65.5% C 72.0% B 78.0% A 85.0% A*
The problem comes where the Grade is A or A* as the Vlookup table can't differentiate the two. Anyone know how to modify the formula so that A and A* are seen as distinct values?
I am trying to determine if I can write a formula that will read text in one cell, such as insurance and if true enter the amount from another cell and if false then 0. I have tried a IF statement by add the text to name manager. However, the answer is 0 rather than the amount in the selected cell. I might need to use a different formula or function.
I am working on a form to pull employee identifiers such as employee ID, store number as well as sales performance. I am using the below formula but the data that is being returned is not the correct data for the specific employee. C5 is the employee name (last name, first name) in a single cell. A sample of the spreadsheet I am trying to pull data from is attached. Some employees the formula pulls the right data and some it does not...
I have a rowfilter on the location (so i can view who took the test by location nad whether or not they passed) - the only problem is that when it selects by location - it chooses the correct name, personellnum, location row but it then picks the test values ABOVE that row - not below it - so It is choosing the complete wrong values to go with the associated person -
I have the following equation programed in Excel, (see file attached). I do not understand while the match funstion is not working the lookup value is the on in cell N1 the array is from B1:F1. The return value should be 3 but I get #NA instead at the begining I was thinking that the values were different but then I compared cell =D1=N1 and the result was TRUE, meaning that they are equal
My problem is that i am copying values from one sheet like: 1355,588846 and 456,23589 and storing them in a array. When i want to display the array in another sheet the values come out like 1355588846 and 45623589. So in the first sheet excel recorgnises the comma as a decimal number and in the other sheet as a thousand separator. How can i change this?
i have converted my text from notepad into excel format and i realise that some of my columns are shift 1 cell away for example my applications name should be in cell A but after converting, some of my cell A is move into Cell B. is there anyway that i can delete the cell that are blank and shift to Cell A or shift everything from cell b into cell a if cell a is blank? i have alot of documents to change..
I have a module that imports data from a text file (120000 rows), filters and removes some unneeded (85000)rows and then puts the data in a designated workbook.
Problem: when filtering by some criteria it for some reason removes a row off the final file for each criteria. I have a total of 23 filtering criteria. I have attached a file for exemplification. You can run the module and import the file, it will be without first 23 rows, even if non of the deleted rows contained the filter criteria.
