i just want to ask if there's any way to make this a whole number?
-> 1.222.33
it should be 1,222.33, but the problem is they input it as like that, i want to copy and paste all the numbers without doing pressing "f2" and delete the period to make it a whole number.
I have a bunch of numbers which were generated using a function. When i try to copy and paste the number to another spreadsheet i end up pasting the underlying function-formula instead......
Is there a way to copy and paste what is seen in the cell, not what is underlying?
We have a template sheet we use which has a sheet formatted as 'text' - it msu remain this way for another purpose.
We wish to copy information from other sheets/places and paste into the template sheet - but have it as text (with green triangle on it)
I have tried copy and pasting (the sheet is already formatted as text.
I have tried copy and paste special as values but to no avail.
(I have attached a small example which shows the template, data to past and end result of what I require - the redtab sheets are attempts to paste!
I know there is a really simple solution but I cannot for the life of me see it!!!!!!
Please help! Auto Merged Post;I kept searching and have found a way to do it on 1 column...
(Data/Text to columns....text)
- but how do you do it over a sheet that contains say 120 columns (i.e.: en masse)..???
I'm using 2003.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet
2. Paste cells into Racks worksheet in cell C5
3. Change font size to 6
4. Sort by Column T descending then by Column C ascending
5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet
6. Paste row into M1 worksheet in cell D4
7. Print M1
8. Drop down one row on the Racks worksheet
9. Repeat steps 5-8 until there's a blank row.
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
how to record a value of a cell whenever F9 is pressed. The cell I want to record the value of is cell D101, which is a sum function of the previous 100 rows. I'd like to figure out a way to run 1,000 trials or so and record the value in cell D101 each time.
Some more details, if needed: I'm simulating a dice game (craps). There are 2 dice, each dice is based off of RANDBETWEEN (1,6) then the dice are added in a different column to achieve the roll. The payout is then based on whatever number was rolled. I'm summing the payout (D101) and would like to run this trial 1,000 times.
I have a formulas in Sheet1 linked to other sheets, but I have only formula and there are no sheets ( eg: in sheet 1 A1 =Data!A1) where as there is no sheet called Data. I have a macro to import this sheets from a different file.
The problem I am facing is, after importing the sheets, the formula still shows #REF but if I do double click the cell or press F2 and then "Enter" the value appears. I have about 1200 formulas in this sheets.
Once I reach Column G and I press enter, instead of going to Col I, How can I get Excel to back back to Col A, but on the next row?
View 5 Replies View RelatedI recently upgraded to Excel 2007. I use Excel with "Allow editing directly in cells" unchecked. In previous versions, pressing F2 would not prevent me from using the mouse scroll, but in Excel 2007 I am unable to mouse scroll which makes it bothersome. Is there a setting somewhere that can enable mouse scroll after pressing F2?
this is a work product and we can't use VBA.
Is it possible to launch Excel at a specified time without someone pressing a button?
I'm working on a network which has disabled Scheduled Tasks. The purpose of this request is to launch Excel in the early hours of the day so that a macro would run and update the data from a data source. The macro works brilliantly, but I without anyone in the office at 2am to open Excel, I need to find a way to launch it automatically.
Also, I don't have permissions to install programs or add-ins from the Internet. It doesn't leave me with many options, but I'm just wondering if there's a trick that has so far eluded me.
I have set the default in Excel to move across to the next cell after I press Enter. This is fine for most workbooks but I have a particular workbook in which it would be preferable (save keystrokes) for the cursor to move down one cell. Is it possible to have one action as the default but another for a particular workbook?
View 7 Replies View RelatedI would like to design a button (with macros),so that users of my excel page do not need to press CONTROL+SHIFT+F1+ALT,which needs to be pressed on my firm to get the new data from a central server.
View 3 Replies View RelatedI have a userform contains a label control .. what I want is showing that label when Caps Lock is on and hide it when Caps Lock is off.
View 14 Replies View Relatedthe title should read... pressing cancel in inputbox, continues the macro... In theory, pressing the cancel button should stop the macros, but it continues as if pressing ok button...
View 3 Replies View RelatedHow would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
I have the following code to add dash mark to TextBox1 value depending on some condtions (mentioned in the code), the code works perfectly, but when we use Backspace Key to clear some charactors it is conflicting with the code running when changing Textbox1 value.
View 11 Replies View RelatedI have a workbook with a data entry sheet.
The name of the data entry sheet is 'Enter Data Here', and my employees will be filling in information in columns A to U.
I want to be able to accomplish 2 things.
1) When an employee opens the file, he/she is not able to edit any non-blank cells in columns A to U.
2) Employee is able to add data to a new row in columns A to U, and is able to edit this until they press 'SAVE'
Is this possible?
I have a button in a template file, that when clicked, saves the file as a new file with file name based on data in certain cells.
I want to disable the ability to save the file with the Save icon or Ctrl-S, but the button still needs to be able to save it (the button is technically doing a Save As, so no problem there). But, I, as the administrator of the template, need to somehow be able to save updates to the template file. Can this be accomplished by coding Save to work when used with a secret key combination that only I know (I can put it in password-protected VB code)?
Then, as if that's not tricky enough, the trickier part is that once the file is saved as the new file (no longer the template) - re-enable the Save button and Ctrl-S so the user can then save it as many times as they want.
I have a simple formula in cell A2
=A1
But it will not calculate. I have gone to Tools - Options - Calculation to see if calculation is set to Manual but it is Automatic. Is there another setting or have I exceeded some limit?
Imagine you have only one column - column A. In column A you have 500,000 + rows with text like the following:
!magnus
snooze'
sleepy/
act noun
act verb
Today&tomorrow
*bialgebras
/dev/ null
dev
ull
1970;
Dwight Schrute
and your goal is to figure out a way to simultaneously transform the above rows into:
snooze
sleepy
act
act
Todaytomorrow
bialgebras
devnull
devnull
1970
DwightSchrute
I know I can use Filter and filter out characters like &'!/; but that takes too long because I have a lot of lists to go through with thousands of entries. There must be a macro that will close spaces between words when only one space exists, but eliminate every word if 2 or more spaces exist between words - as well as eliminate unwanted characters like the ones I described above. I know I could use substitute and eliminate the spaces between words =substitute(a1," ","") but then I'd have to filter each and every instance of unwanted character.
I have a file with data in one sheet (unfortunately I cannot share the file because of confidential data..), and two sheets with both 9-11 charts in them.
The charts are all filled simply with a dynamic range from the datasheet, so that Last Year and all months from this year with data in them are always in there.
The problem: When opening either of the graph sheets, the (familiar?) error pops up: "A formula in this worksheet contains one or more invalid references. Verify that your formulas contain a valid path, workbook, range name and cell reference."
One of the graphs has an error and only shows one point of data in it. But only until I press F9, and then the chart is repaired and functions perfectly like all the others!
I have tried lots of things, including checking all source ranges, deleting all graph names etc. and then repaired it so it would work again. The only thing that happened, is that the same error now pops up for another graph in the sheet. Still, when you press F9, the graph functions again!
Can I make the cursor use only 2 columns? In other words, I know that when I scan barcode data into A1, I have the cursor automatically move to B1. BUT, once I've scanned data into B1, how do I make the cursor automatically move to A2?
View 2 Replies View RelatedIs it possible to lock the computer using VBA. i.e Simulate pressing Ctrl+Alt+Delete and then clicking Lock Computer so once this has been clicked the user will have to enter the password to unlock. I thought that using the SendKeys would be a start but this does nothing.
SendKeys "^%{DELETE}"
DoEvents
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I want this macro to find in this case "406" in column A which is at the very end of the last block of 160 rows of information.
I then want it to move up 159 rows and copy 160 rows of information underneath the last block of information.
i.e.go to A5280 , then go to a5121, copy rows 5121:5280 to 5281.
It falls over on the very last line of code I can see A5281 selected but it won't paste....
