I need to populated a specific range of cells based on a value of any kind in a header cell. Attached is a sample of the end results. Please remember each header cells needs to determine what happens the range of cells below the header cells.
View 3 RepliesI am trying to build a staff roster. The staff rotate over a 4 week cycle. the name of the staff member, and their shift needs to be looked up from the key then matched with the particular week. the name and shift then need to populate specific cells.
I have attached the worksheet so you can see what i am trying to achieve.
Here is what i am trying to achieve. If the date 2/20/2010 is located at F53 & the cell next to it at H53 is populated with a number between 1 & 16, then i want the cell at J11 (42 rows further up) to auto populate with the number 1. When this occurs the cells beneath this, from J12 to J52 should also auto populate with the with consecutive numbers from 2 to 42. Would also like to see the cells with numbers 1 to 28, automatically format to orange & the cells containing numbers 29 to 42 automatically format to yellow. I plan to have this condition repeat several times later in the year, at dates that are to be decided. When these dates are decided i want to be able to enter a number from 1 to 16 & next to the date & all of the above automatically occurs.
View 14 Replies View Related I am looking for a VBA that could populate from column (A2:A5) to cells (B2:F5) as in the attached spreadsheet, based on the frequency, in a five year time-frame.
screen_print.JPG
[Code] .....
Is there a way to link a header or a portion of a header to a specific cell?
View 14 Replies View RelatedI want to populate the value of a specific cell based on the choices made from two other dependent validation lists.
I am attaching a workbook that explains what I need to do.
I need to create a dynamic range based on cell between a header and footer cell. The header cell ( A8 ) will remain static, however, the footer cell starts at A10 and then will move down as rows are added.
View 9 Replies View RelatedIs it possible to be able to select a range of dates, and a time interval, and then to automatically fill in cells in a column? to be more specific, I want to be able to select, say 1 Jan 2013 to 31 dec 2013 in one box, then specify a time interval, for example "hourly" and then a column is populated with each interval, i.e. 1 jan 2013 00:00, and then the next one is 1 jan 2013 01:00 etc. I have tired the normal automatic fill tool but it never seems to get it right. It works for the first few days then it all goes funny.
View 3 Replies View RelatedI need to modify the code below:
PHP
Sub Macro1()
Macro1 Macro
Dim strbody As String
For Each cell In Range("B2:B640")
Sheets("MASTER").Select
Cells.Select
Selection.Copy
Sheets("Final Merged").Select
Sheets.Add
ActiveSheet.Paste
Next
End Sub
The code above is creating a new sheet for each different value in column B. I would also like to take that value and place on the newly created sheet in cell A17.
Also, how would I get the sheet to be ranamed to match the value in cell A17 of the newly created sheet?
I have a table in excel with some data to create labels, but these labels must be repeated according to the number of volumes. Example: I have a delivery for X and such delivery has 5 volumes, need to create 5 labels just changing the volume number: 1/5, 2/5, 3/5, 4​​/5 5/5.
I would enter a value in "D1" after running the code, in column "A" shall be filled as follows.
D1 = 7
A2 = 1/7
A2 = 2/7
A2 = 3/7
A2 = 4/7
A2 = 5/7
A2 = 6/7
A2 = 7/7
If "D1" equals 3 then
A2 = 1/3
A2 = 2/3
A2 = 3/3
I've attached an example workbook.
Trip Plan example.xlsx
I'm trying to work out how to have cells R11 - Rxx generate the correct date, based on the rest of the calculations.
Please note that the attached is a crude cut down version of the larger spreadsheet, for the purpose of highlighting my problem.
SO, if E7 is changed, subsequently the values in K11:Rxx will be respectively updated.
D12 and G12 are entered manually. (although I'll probably make these drop downs or date choosers at some point...)
Depending on the value in E7 and time in D12, the required break period is listed in K11: Kxx.
The time that these periods of rest are required to occur before is then calculated and listed in O11:Oxx.
I need R11:Rxx to calculated the appropriate date from these calculations, relative to the date in G12.
For example, the rest required in K11, is required on the same day, as such it need to populate with the value in G12.
However the rest required in K13:Kxx, is required by a time (O13:Oxx) on the following day - G12+1
In some case, this time variance could run over 2 or more days.
I figure it's got something to do with the value in D12 also including the date of 0/1/1900.
I'm happy to add hidden cells for formulas/results to work around it, as the end product will print as an A4 document, where many cells will be locked.
Would prefer not go with any VBA unless it's my only option as I haven't done any VBA stuff as yet.
NB (the value in P5 is static only in this example)
Is there a way to make a cell populate certain text based on conditions of other cells without putting the formula in the cell you want to populate. So that someone could type other text into the cell if the conditions were not met?
View 14 Replies View RelatedI have a spreadsheet and I was wondering if there is a way to copy from a specific range in say A1:A5 in Sheet1 and paste into Sheet2 where the column matches cell A1 in Sheet1.
I am trying to do this in VBA and I was wondering if there is a way to do this.
I'm creating a configuration tool for instrumentation that has several options. Many of these options are dependent on one another. To summarize, I need to:
*Conditionally lock cells (and populate with "N/A") OR allow selection from drop down list - the list exists, it's the locking and auto-population I'm struggling with
Example: If A1 = No, then B1 = "N/A" and is locked, else allow selection from drop down list in B1
I have a spreadsheet with data populated down column B. This size will vary from day to day so is there a macro I can run that will populate Column C with a formula based on their being data in the adjacent cell.
View 2 Replies View RelatedI have a drop down list that shows phrases for different math functions, like "divide by 2," "divide by 4," divide by 8," etc. When one of these items is selected, I want it to perform that specific calculation on a range of nearby cells.
However, I also want the user to be able to see the original value of the cells if they select "show original value" from the drop down list.
I have attached a workbook as an example. I think macro would probably work best.
oz_list_math.xlsx
I am attempting to populate a ComboBox ( named "SRnumber2") on a userform (named "UpdateSR"), but have hit a brick wall. The following testing code was working but now it is not:
Private Sub UpdateSR_Initialize() 'This section of code initializes the drop-down boxes.
'Add list entries to SR Number combo box. The value of each
'entry matches the existing SR Information spreadsheet entries in column "A"
Sheets("SR Information").Select
SRnumber.ColumnCount = 1
SRnumber.RowSource = "A2:A200"
SRnumber.BoundColumn = 0 ...........
I am looking for VB code that will format a range of cells from a number format to a percentage format based on a reference cell. The reference cell is a drop down created from a list validation.
For example: If the reference cell (cell A1) =1 then cell range B2:C4 would be a number format. If A1 = 2 then cell range B2:C4 would be a percentage format.
I have searched for hours trying to find a relevant thread; I know they are out there, maybe I just wasn't typing in the correct search words.
Is it possible for the tab name to auto populate from a specific cells contents?
View 9 Replies View RelatedI have a data set, in which Sheet 1 have a matrix of high level showing Engineer, Program and commodity relationship.
I have to create separate sheet for each program on sheet 1, each program sheet should have Engineer name and commodity name from sheet 1.
Multiple commodities and multiple engineers should be separated by definite structure.
find worksheet with input and output (manual) as expected.
Let me start by stating that I am a novice at writing macro script. I am trying to write a script that will open and search a Word doc, find specific text in that document, and populate certain excel cells with that information.
Ex. of Word doc:
5.1.2.3 Install gasket [12], using bolt [5] and nut [8].
5.1.2.4 Uninstall gasket [12] and scrap gasket and fasteners.
I would like the script to search for and populate any number between the [ ] into a specific excel cell, also I would like it to identify and populate an excell cell with the associated step, e.g.: "5.1.2.3", which will be at the begining of that step (step could be several sentences long). Also, I would like the script to look for and identify/populate an excel cell with any number of words such as: "install", "uninstall", "break", "scrap", or "remove" also associated with that step.
i am trying to Put a specific value i,e "NO Deliveries" in blank Cells in the same row based on value in 1st cell of the Row which has a fixed value . note:the columns and rows are dynamic for example: I want to put the value "no Deliveries" in cell C because its blank.
A B C D
% of Availability
0.00%
80.00%
So I have this list (I made it a little bit shorter).
So what you see is two different tasks (01 and 02) and three different conditions (A, B and C). In column B you see the result I would like to have. '/Searchtask_01.html' in A1 belongs to conditions A, because it is in session A. However, '/Searchtask_01.html' in A10 belongs to conditions B, because it is in session B.
How to get the results in B with a formula?
I'm trying to copy cells from a column in one workbook to cells in a column in another workbook based on what's in a header column.
Such as
Original workbook
Mat Qty
A 1
C 3
D 2
E 4
G 5
Total 15
Target workbook becomes
Mat Qty -> Mat Qty
A -> A 1
B -> B
C -> C 3
D -> D 2
E -> E 4
F -> F
G -> G 5
My code so far (which might not be worth reading) is:
Code:
Sub CopyColumnToWorkbook()
Dim sourceColumn As Range, targetColumn As Range, sourceColumnValue As Range, targetColumnValue As Range
Dim mySourceCell As Range, myTargetCell As Range
[code].....
I'm getting a runtime error ('1004'. Application-defined or object-defined error) on the Copy statement within the If sttement.
I am trying to use VBA to populate the first blank cell in row 6 with the word "Short"
I keep getting sub or function not defined and I am sure its because I am trying to Frankenstein some code together to get it to work. So far everything works as I need but this last step.
I have a spreadsheet an excerpt of which is as follows:
K L M N
1 Doors Security Vehicle Key
2 TRUE FALSE FALSE FALSE
3 FALSE TRUE TRUE FALSE
4 FALSE FALSE FALSE FALSE
Want I want to happen is to return the column header where there for a cell which contains "TRUE" in a blank column. If there isn't a cell with the value "TRUE" then to return "N/A". In the above example in blank column P for Row 2 would be "Doors", Row 3 would be "Security,Vehicle" and Row 4 would be "N/A".
In my actual spreadsheet I have 12 columns (L to W) which have the TRUE or FALSE values.
I know it has something to do with either HLOOKUP, INDEX and MATCH but can't seem to get it right. Any ideas?
I have a rather large table that I need to return the column heading from.
Within the table I have a list of Names in the left most Column (A) and a list of Percentiles in the header row (row 2) (incrementing by 5%). By inputting the name and a cell value I am trying to return the column header.
Using an example;
5% 10% 15%
Bob 3.5 4.1 4.15
John 3.6 4.2 4.30
Chris 3.3 4.9 4.95
Sammy 3.7 4.6 4.7
Like I said, knowing the name and the cell value, I want to return the percentage value. So for example, Bob would be one input value, and another input value would be 4.1. I would want excel to return 10%.
I have found different suggestions using a combination of index/match but even using these functions I cannot get it to return the COLUMN value instead of a cell value.
I have a range of cells that I want to use as column headings. Say the range is A1:A100. I need them to be able to be transposed across the first row of the sheet. Now I know that I can use the transpose function in a cell but this array is embedded in a macro.
View 3 Replies View RelatedThe file is attached here. I would like to be able to autopopulate cells based on a dropdown. The first tab has the final report and the other 2 tabs are the raw files.
KMPH_Inventory.xlsx‎
I run this macro that populates 7 cells based on data in another sheet. It seems that every sheet that have formulas that point to this sheet are being stuck in in the screen updating somehow?
Basically when I press F9 to calculate or change any cell that makes the sheet calculate it has like a screen burn in of all the sheets that are being calculated. I have been able to use this as a workaround:
Private Sub Workbook_SheetCalculate(ByVal Sh As Object)
Application.ScreenUpdating = True
End Sub
But I shouldn't have to do this and it slows it down as it runs through this specific code about 11 times for each sheet that is re-calculating. Something is getting stuck in memory or something that seems to be causing this issue. This is the code I am using and I am not selecting any cells or sheets, but it appears that when I walk through the code that an image of the sheet comes up on the screen? The code in red seems to be what is causing the issues, but I do not know why? I can pass the 2 workbooks along to someone so they can see the behavior if they would like? Just let me know.
Sub populateEmployeeData()
Dim srcWorkbook As Workbook
Dim foundEmployee As Range
Dim srcWorkbookName As String
srcWorkbookName = "XIP_Employee_Data_" & Left(ActiveSheet.Range("B9").Value, 31) & "_" & Format(ActiveSheet.Range("B10").Value, "MMMDDYYYY") & ".xlsx"
If IsWorkBookOpen(srcWorkbookName) Then..........................