Index Vlookup Match

Dec 4, 2008

I have a tab that has Employee Name in one column and the benefit they chose in another column. The employee name is repeated a number of times since they have chosen more than one benefit.

I am trying to create a new tab where the employee name in is the first column (only once) and each benefit is listed in separate columns along the top. I want to put an "x" in the column for the benefit the employee has chosen.

Is there a way to say "look for this employee, see if this benefit is what they chose, and if it is, put an "x", if not, leave blank"?

View 9 Replies


ADVERTISEMENT

Formulas By Using VLOOKUP, INDEX, MATCH, INDEX&MATCH Separately

Oct 8, 2009

I have this table

.......A.....B.....C....D
1.....I......a.....d.....g

2.....II.....b.....e.....h

3.....III....c.....f......i

As you can see, the number I has a,d,and g, II has b,e,and h, and III has c, f, and i

I want to make formula that if I make the input g it would return I, f would return III, and c would return III, and so on

I want to make four formulas by using VLOOKUP, INDEX, MATCH, INDEX&MATCH separately.

View 9 Replies View Related

VLOOKUP / INDEX / MATCH Function: Match Data From 2 Independent Sets??

Oct 8, 2009

I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)

View 2 Replies View Related

VLOOKUP / INDEX And MATCH To Return All Values That Match

Feb 4, 2014

I have two sheets of data , sheet A and Sheet B.

Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.

I have filled out the first two rows of results that should be returned as an example.

One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.

View 3 Replies View Related

Vlookup OR Index And Match.

Oct 22, 2009

I have a worksheet that has numerical data in A1:A22. In E1:E61 I have set values in numerical order and in F1:F61 I have a letter or letters that correspond to E1:61.

I am trying to write a formula in B1 that will look at the value in A1 and then match it up in E1:E61 and then return the corresponding letter in F1:F61.

e.g: in A1 i have an INDEX and MATCH formula

View 2 Replies View Related

Match/index/vlookup

Apr 3, 2008

I have two worksheets that I am hoping to use to generate one report in excel. Sheet1 contains the following information for my entire work center:

Benefitor Account Dollar Value Document #


Sheet2 contains a list of Benefitors that are relevant to only me.

I want to pull the information from Sheet1 where the benefitors on Sheet1 match the benefitors listed on Sheet2 into Sheet3.

View 11 Replies View Related

Vlookup Or Index/match

Jun 5, 2009

I am trying to get the info shown on table 1 into table 2. I suspect index and match is the answer, but I am not sure.

Table 1 Employee # Deduction Amount 101 AD&D 7.00 101 LIFE 4.00 101 LTD 12.00 101 STD 6.00 101 HEALTH 300.00 101 DENTAL 25.00 105 AD&D 8.00 105 LIFE 6.00 105 LTD 6.00 105 STD 300.00 105 HEALTH 25.00 105 DENTAL 8.00 112 AD&D 7.00 112 LIFE 5.00 112 LTD 13.00 112 STD 5.00 112 HEALTH 450.00 112 DENTAL 37.00 Table 2 AD&D LIFE LTD STD HEALTH DENTAL 101 105 112

View 9 Replies View Related

VLOOKUP / INDEX And MATCH For Second Value In Column?

May 1, 2014

If I have a column of data with a bunch of values (which can't be sorted & which is constantly changing so cant be broken into another column and then sorted) what formula do I need to output the second occurrence of a value in that column?

View 3 Replies View Related

Vlookup With Match / Index Option?

Mar 3, 2014

Attached example file has data with which I need to do the following;

On the tab "part list" I put in the part number in column F. Column C should then be populated automatically by looking up column F in the tab "Lookup" and showing the value found in column B of that tab.

The difficulty with this is, is that when the part number in column F starts with "DN", the lookup value should end with "FD/A" and when the part number in column F starts with "Z", the lookup value should end with "TY/A".

This last part I can't get it to work. I've tried vlookup with a index/match function inside, but it won't work somehow...

View 3 Replies View Related

Using Result If Index & Match In Vlookup

Dec 25, 2007

I have used in Index & Match formula in column G as follows :

=IF(ISNA(INDEX(R:R,MATCH(E13,S:S,0))),"",(INDEX(R:R,MATCH(E13,S:S,0))))

The codes in columns R & S are as follows:

******** ******************** ************************************************************************>Microsoft Excel - M_NECPE.Man Accts.xls___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutR1=RSTU1New CodesOld Codes  2    310100199999V  4101002NEW  51010032270A  61010061100  7101009NEW  81010101104  91010111101P  101010121101S  111010141102  121010151102L  131010181130  141010222203  151010231106I  Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.

The code in column E & G is as follows:

******** ******************** ************************************************************************>Microsoft Excel - M_NECPE.Man Accts.xls___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutG62H62G63H63G64H64G65H65G66H66G67H67G68H68G69H69G70H70G71H71G72H72G73H73G74H74=EFGH621106B|  631100|101006 641101D|  651101K|  661101P|101011 671101S|101012 681102|101014 691105R|  701103|101037 711104|101010 721105|  731106|101031 741106I|101023 Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.

I have used a lookup table to calculate the value in column H as follows, but cannot get it to work

=IF(ISERR(VLOOKUP($E62,$M$3:$O$850,3))=1," ",VLOOKUP($E62,$M$3:$O$850,3))

View 9 Replies View Related

Index/match/vlookup And ODBC SQL

May 7, 2009

I want to create a formula that will use a database table as a lookup for index/match and vlookup type functions.

I have my ODBC connection connecting to a mysql database and am successfully able to run sql queries through excel.

Is there a way to get index/match/vlookup formulas to use the database table as the lookup range?

View 9 Replies View Related

HLOOKUP VLOOKUP INDEX & MATCH Etc

Feb 14, 2010

I don't want VB code but a worksheet formula.

I have a table full of names and cars sold. The table tracks the person's progress. It is like a diary. It's a simplied version of the DB I am currently working with.

Is it possible to do the following things? I have basically 2 types of questions.

1)When was the last red car sold?

2)When was a car sold irrespective of color?

The answer to each question will be put in separate columns.
I have only included January but I will do this for the entire year of 2010 and also I will do this for all of the names in my database. I think there are about 300.

When was the last time ANDY sold a RED car?
The answer should be 1/12/2010
The answer will be put in ROW A COLUMN I

When was the last time ANDY sold a car irrespective of color?
The answer should be 1/12/2010
The answer will be put in ROW A COLUMN J

When was the last time BILL sold a RED car?
The answer should be 1/10/2010.
The answer will be put in ROW B COLUMN I

When was the last time BILL sold a car irrespective of color
The answer should be 1/11/2010
The answer will be put in ROW B COLUMN J

I have attached a thumbnail of a sample Database

View 9 Replies View Related

Index, VLOOKUP, MATCH Formula

Feb 28, 2010

I have the following arrangement
PVCu_Woodgrain_DoorF190210300#REF!

PVCu _woodgrain_Door is a drop down list that selects from a number of named ranges.

The Cell that shows (F1) and is called DOORSTYLE with 6 choices F1, F2 ... F6 (I cannot change these to numeric only values)

300 is the 2 previous cells added together. It is called DRSZ1 and will match a numeric value in the named array.

My formula cell with the issue has this formula;
=INDEX(INDIRECT(ARRAYDR1),MATCH(DOORSTYLE,INDEX(INDIRECT(ARRAYDR1),0,1)),MATCH(DRSZ1,INDEX(INDIRECT(ARRAYDR1),1,0)))

I know MATCH(DOORSTYLE,INDEX etc. should be a VLOOKUP to find F1 in the named array, but I just cannot get it right.

View 9 Replies View Related

Index / Match Or VLookup For Multiple Criteria

Jun 9, 2014

Getting a formula that will generate the corresponding rating attached to a row value and columns header as per below example:

EnglishSS1 EnglishSS2 EnglishSS3 Rating
10 20 30 3
20 30 40 2
30 40 50 1

Where my variables would be based on whether a person is under EnglishSS1 and getting a score of <=10, the resulting rating would be 3. I know this is doable by doing a vlookup with a range lookup value of false. However I have roughly 70 column headers and it will be a bit taxing to combine an If and Vlookup statement to address it.

I have attached a sample sheet for reference : Book1.xlsx‎

View 2 Replies View Related

Combination Of AVERAGE With VLOOKUP And MATCH / INDEX?

Aug 14, 2014

What I want to do is the following, I have two sheets, one where the data needs to be filled and the second where the date needs to be looked up. In Sheet1 I need to find a date for each of the NR2 and NR1 combination. But in the second sheet there are multiple NR1 occurences and also single occurences. So if there is only one, I need that date, if there are several I need the average of all the occurences for NR1, not taking into account the N/A ones.

(some examples from the file)
NR2 NR DATE
100707987121951
100702347121960
100707750121960
100707721121960
100702422121960

[code]....

So for example, NR1 121965 has two dates, 03/09/2002 and 27/01/2004, so here it should calculate the average of these two and put that average in the first sheet.

I was thinking of something like IF(MATCH(?) gives one result,put that with vlookup, else AVERAGE of all MATCH that are not N/A)

View 3 Replies View Related

Vlookup, Index, Match, Offset, What Combination Should I Use?

Sep 22, 2009

I have attached an example s/sheet. Basically this is an excerpt of the data that sits in a pivot table. What I want to do is from another sheet query this data. I don't want to use another pivot table as they are quite hungry in terms of memory and the data source we have is quite large. In essence what I want to achieve is in cell G2 the user enters a code. A function (vlookup?) will then scan column A to find that code.

The function then needs to look across and sum the total of Requests and Responses for all the dates. Whilst the dates may change, the number of dates will remain the same. Once it has summed them it needs to return the totals to cells G4 and G5. Additionally it needs to fill in the relevant total (offset?) for the corresponding week as detailed in columns H-AH. It seems quite a simple lookup issue but I am not very versed in nested lookups. I have looked around and it seems INDEX woudl do the job but I am at a loss on how to construct this type of function.

View 3 Replies View Related

Returning Second / Third Etc Values Using VLOOKUP / INDEX / MATCH

Mar 1, 2014

making a forumla that will return the second, third ewtc values using VLOOKUP or INDEX/MATCH. Attached is a dummy file almost identical to the one I'm working in. In the first sheet there's a dependent drop-down list with the values Sub1, Sub2 and Sub3. This corresponds with data in sheet two listed next to these names. The problem is when I try to populate the table below using VLOOKUP etc it just repeats the first row over and over rather than defaulting to the second and third row results

View 6 Replies View Related

VLookup Or Index / Match Multiple Occurrences?

Jan 24, 2014

I have some data which I update every now and again. Then I extract and clean up and currently have it output to 4 columns.

The four columns currently looks like this:

A | B | C | D
1 name name2 stats stats2
2 ....
3 ....

Each column is then populated with a decent amount of names and stats, and the same name occurs multiple times. I'm looking up a specific name in the A column, and can extract the stats in C fine using INDEX/MATCH, but it only returns the data from the first instance the name occurs. I've googled it a bit and believe I could possibly wrap my head around returning multiple instances.

However, there are a couple of other criteria for my extraction of the stats which makes me believe I'm in way over my head. The data is in chronological order, with the newest on the bottom. I'm wanting to extract the stats in inversed order so starting from bottom going upwards, if that makes sense. Further, preferably I'd want to limit the amount of extraction to X amounts. And lastly to make it really complicated, for the newest entries stats are not yet available so only the names (column A and B) are populated, I need it to skip those entries, since, obviously, there are no stats there to extract, and I wouldnt want to end up with a lot of blank cells in my summary.

View 2 Replies View Related

Index / Match And VLookup Didn't Work?

Apr 28, 2014

I have a question in regards to excel. I have a set of data arranged as follows:

Date System Desc
3/7/14 IPE Alphamo
3/7/14 IPE Beta
3/7/14 i3 Gammana
7/7/14 ews Pisqrt
7/7/14 IPE Jaque
8/7/14 saa Mistiqe

And I need to put them into a calendar with the following format:

3/7/14 7/7/14 8/7/14
IPE Alphamo Jaque
IPE Beta
I3 Gammana
ews Pisqrt
saa Mistiqe

I have tried index and match, vlookup and etc but it didn't work.

View 4 Replies View Related

Vlookup Or Index/match With Most Recent Record

Feb 7, 2007

I have a list of people and the dates they completed activities on. I would like to do a vlookup (or index/match) that returns the most recent event. For example, if I was after the most recent date that 'rogers' went 'fishing' it would be 03 Feb 07....

View 9 Replies View Related

Multiple Index Match Formulas Instead Of Static If Vlookup?

Apr 10, 2014

I attached a file containing two sheets. The first sheet is called Input on this sheet there are several categories of which I displayed the first three on. My ultimate goal is to get the Input per category broken down horizontally over the line-items on the Output sheet. Every category contains several line items to which costs are attached (f.e. in category 10, line item 4000, the costs are 33,000$ and so on).

The problem is that every month the costs are changing per line-item, but also the number of line items per category will change due to the fact that the line-items are only displayed if there are in a specific month costs booked to the line-item. In other words sometimes line-items are added due to costs booked at the line-item, but if in one month there are no costs booked at the line-item it disappears from the overview. A formula containing: '=if(category=10,vlookup(... is to static due to the changing line-items.

View 8 Replies View Related

Count Number Of Cells > 0 While Using VLookup / Index-Match

Aug 22, 2014

From the highlighted cells at B17 to B19, while using some kind of lookup or indexing method, I want to count the number of cells in that specific range that's great than zero. This list is just a sample, the list will be much bigger and order may not be the same--that's why I need to lookup the project name.

View 7 Replies View Related

Excel 2007 - Vlookup / Index / Match With Two Datasets On Two Sheets

May 22, 2014

I have two data sets across two worksheets. The first worksheet contains sales order numbers (Sheet1:column A) and other data . The second worksheet contains sales order numbers (Sheet2:column A) and the product details.

On sheet1, I had to manually duplicate a sales order number (inserting another row) if the number of units of the order is greater than 1. I then need to fetch the product details from sheet2 for each unit for that specific order number. However in sheet2, there are multiple products for one sales order number.

How do i create a lookup/match to fetch the product details for each sales order number without duplicating the product details if there are multiple products for one sales order number?

I know a simple vlookup function will return the values that it matches first and that is not what i want.

Example: Sheet1

Column A (Sales Order#) | Column B (Quantity)

0417436GPCP | 1

0417436GPCP | 1

0413412FACY | 1

0413412FACY | 1

[code].....

View 6 Replies View Related

Conditional Formating IF, Match, Index And Vlookup To Find Several Duplicated Value

Apr 11, 2009

This had been hunting me for weeks and I still could not come over it after weeks of study the conditional formating IF, match, index, Vlookup, etc to find several duplicated value, e.g Column B = Name 1 & Row B = Time and so on, where as Name will have data of Name 1 duplicated in different time, while row B, "Time"would change to a different Name and maybe it would go back to Name one.

My problem was dont know which formula I can use in a different sheet to bring back the data to Name 1 did Task A at Time A, while Name 1 did Task B at Time K, etc. If this is not Name 1, then Name B replace above.

View 4 Replies View Related

Vlookup, Match, Index: Calculation By Customer, By Service Type

Sep 24, 2009

Using Excel 2003 and am trying to do a calculation by customer, by service type. Attached is the workbook and I've tried numerous ways to do this. On the revenue calculation worksheet, I am tryng to calculate the type of service minutes from the data retrieve worksheet, multipled by the service rate on the rate table for the specifc type of minute by customer. I'd like to build it as a vlookup by customer and then by service type, but have run into difficulty.

View 4 Replies View Related

Excel 2007 :: Convert VLookup To Match And Index Formula

Sep 21, 2012

HTML Code: VLOOKUP(M2,'FX Rates'!$A$1:$P$199,2,FALSE)

I have lots of vlookups in my spreadsheet. Match and Index is a better method and should speed up my spreadsheet (1000s of vlookups!).

View 5 Replies View Related

Excel 2003 :: Double Lookup (Index / Match Or VLookup) Within Same Column?

Mar 15, 2013

I have two spreadsheets, one with master file with original data and one that needs to pull in the original data. My issue is all the data to match off of is in the same column, and a number of other files link to the master file, plus it is used externally, so I cannot alter it, and I would rather not create a mock/copy file. Is there a formula that can look for 2 different items within the same column? Would prefer not to use VBA, but if that's the only option I'll take it. I am using Excel 2003.

Here is an example of the setup - I would need the formula to reference off the two different items/categories in the column, so lookup off the 'St. Louis' and following that, lookup off the produce items.

View 4 Replies View Related

Reconciling Large Amount Of Data When VLookup And Match / Index Not Ideal

Nov 12, 2013

I need a little coaching on big data. I have two reports, one from a production system the other from the invoicing system. I need to reconcile the two reports to ensure our invoicing ties out to production. At this time I am focusing on 1 particular item code, but there are potentially hundreds of item codes.

I have 1 Item Code.
I have a around a hundred invoices. (Sample 100)
I have a few hundred different customers. (Sample 100)
I have several hundred lines of billing data. (Sample 650)
I have several thousand lines of production data. (Sample 40,000)
In the billing system, per invoice I might have 1 or more billing lines for this item, usually no more than 2.
In the production system, per invoice I might have 5 to 50 or more production lines for this item per invoice.

Example
Prod System:
30 lines of data has a run amount and a total run amount for each line.

I am looking for tools to reconcile this data. VLookup and Index/Matching is not cutting it. VLOOKUP does not move beyond the first line found. Index/Matching wants to add all the prod together. I can get subtotals easy enough. I have tried Concatenation, but when it takes multiple production data lines to equal 1 billing line, this does not work. I needs some thing that can look at the Qty on a billing invoice and tie it out to various lines of production data to identify which production jobs went on that line of the invoice.

Here is a sample. These are fairly easy to resolve, but others are not so easy due to number of production and billing rows.

Invoice number
Billing item
Est. Quantity
Actual quantity
Billable Qty
Sales order
Position number
Sequence
Agreement
Billing source
Description
Total Billable Qty

[Code] ..........

View 4 Replies View Related

Reverse VLookup (Index Match) To Return Multiple Values Based On Single Lookup Criteria

Jul 11, 2012

I have encountered a situation where I need to essentially accomplish a reverse Vlookup (using index match) and return multiple values.

View 1 Replies View Related

Fastest Lookup Method: Use A Key To Lookup A Value (VLookup, Index/Match, DGet, And The Rest)

Mar 26, 2008

Excel offers many ways to use a key to lookup a value (VLookup, Index/Match, DGet, and the rest). What's the fastest way to perform a lookup of a small table of, say, 30 rows of key-value pairs? Theoretically, it would be most efficient to use a branch table (also known as a jump table). See the wikipedia article for branch tables: http://en.wikipedia.org/wiki/Branch_table. Does Excel/VBA have a way to create a branch table for such lookups?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved