Variable Sheets, Variable Input
Mar 23, 2009
I run a machine that scans parts and is able to output the scans into Excel. Each part scanned creates a new sheet, and the number of sheets is variable as the number of parts scanned depends on the size of the lot. Also, since each part scanned is going to have a different number of features, the information being output on each sheet will be variable as well.
I am trying to figure out how to write a macro that will find the first feature, find the values for that feature I am looking for, output a max and min into a final sheet, and repeat for each feature, and for each sheet. I hope this is clear.
View 3 Replies
ADVERTISEMENT
Jun 27, 2014
I need a macro that will create a sheet at the end of the workbook.
Sum data from a variable amount of sheets and display that data on the created sheet.
Here is a step by step:
Starting on sheet 5.
Column D has a variable amount of part numbers in it. These part numbers would be different between the ascending sheets.
Column T, U, V has an inputed number in it that would need added up across all duplicate part numbers in all the sheets.
(Note: The data would also need started on row 4. Everything above row 4 is headers)
Here is a small example:
D E T U V
13019090W Part A1
68705500 Part B1
64202900 Part C-11
59634600 Part D1
26005300W Part E1
I need the macro to start with sheet #5(starting on row 4). Check to see if there is data in column T, U or V. If there is, to create a new sheet at the end. And copy the entire line into that sheet (starting on row 4).
After that, to check every sheet after (excluding the newly created one, starting on row 4) for data in Column T, U and V. And then check for duplicates in Column D on the newly created sheet. If there is a duplicate to add/subtract that number in Column T, U and V to the SUM in column T, U and V in the newly created sheet. If there is no duplicate, to copy the entire line to the new sheet.
So that when finished. On the new sheet, you have the SUM of T, U and V for everything that has data in T, U or V for all of the previous sheets, plus the entire line of the first instance (excluding the first 4 sheets).
View 2 Replies
View Related
Apr 10, 2013
i know i have done this before but im totally blanking. I want to user the inputvalue in procedures called from controller, but it just shows as empty.
Code:
Sub controler()
Static inputvalue As Long
inputvalue = InputBox("Please set min size of trades.")
'other macro's called here
end sub
View 4 Replies
View Related
Oct 12, 2009
Example:
Order Number from VendorOrder Number from SupplierTracking Number from Supplier12345123451ZABCD13456134561ZBCDE134561ZCDEF14567145671ZDEFG1456714567
In these three orders, the first order nubmer has a 1-to-1 relationship with a single tracking number. In the second, there are two different tracking numbers associated with one number from column A. In the third, there is only one tracking number but three different lines of the same order number that need to be updated with it.
The question is, is there a way to line up data fields head to head even when there are variable inputs like this?
View 15 Replies
View Related
Jul 17, 2007
I have a Workbook containing a list of records. I'd like to create some code to
1) Get the user to input their initials when the workbook opens, and capture the response
2) Clear any filters currently applied
3) Apply filters to a non-continous range of columns
4) Apply the input response as the criteria to one of the columns, and 'blanks' to another 2 columns
Private Sub Workbook_Open()
Static varUser As String
'sets varUser variable as String & stores it
varUser = InputBox(Prompt:="Enter Intials (leave blank to view all)", Title:="Login")
'Activates input box to capture value
Dim ContractsSheet As Range
Set ContractsSheet = Worksheets("Contracts").Range("A1:AA999")
ContractsSheet.EntireRow.Hidden = False....................
View 4 Replies
View Related
Jun 4, 2007
I have the following code (just pasting the relevant section) which crashes when it reaches the highlighted line of code. and a dialog box pops up with the text: "Object variable or With block variable not set"
Sub test()
Dim StartRng As Range
Dim Buffer As Range
Set StartRng = WorkSheets("Sheet1"),Cells(1,1)
StartRng.Activate
ActiveCell. CurrentRegion.Select
Buffer = rngStart.CurrentRegion.Copy
' I also tried the following line of code but that didn't work either
'Set Buffer = rngStart.CurrentRegion.Copy
..
...
End Sub
View 9 Replies
View Related
Jun 6, 2014
I have create an excel formula that I need to input data daily.
Every day, I need to insert a line and input my new data.
Below is my formula
=IF(V159="Skip","Go",IF(P160>0,IF(COUNTIF(C60:D154,">"&H159+3),"Good"),IF(COUNTIF(C60:D154,"<"&H159-3),"Good")))
The problem is that when I insert a line. Most of my variable will change according except C60:D154
As you can see below
V159 change to V160 = This is good
C60:D154 do not change accordingly. How can I make it change accordingly ?? Why it is not changing when I insert a line ?
=IF(V160="Skip","Go",IF(P161>0,IF(COUNTIF(C60:D154,">"&H160+3),"Good"),IF(COUNTIF(C60:D154,"<"&H160-3),"Good")))
View 7 Replies
View Related
Mar 21, 2014
I have a spreadsheet where the start date is manually entered in Cell B1 and an end date is calculated in Cell B3. I would like to have the dates between the start and end date, with a step value of 7 days show in the rows under Cell B3. How do I get this to work?
View 3 Replies
View Related
Jul 23, 2009
I need an action to allow for the random selection of a predetermined series of number codes which represent a given letter.
It is probably easier to look at the attached sheet and the previous discussion to see what I mean.
Previous discussion:
http://www.excelforum.com/excel-work...-of-cells.html
View 2 Replies
View Related
May 10, 2013
how to create a custom function with an unknown/changing number of input parameters?
Specifically, I need to create a function that will calculate the average of 1,2 or more ranges. I can't use the built-in average function as I then need to use the average in my function.
what I have so far is:
function points(current as range, previous as range)
if previous > current then final=1
if previous < current then final=0
if previous = current then final=2
points=final
end function
This works okay if I only only have 1 range of values. but in my worksheet I need to be able to enter =points(a1,c1:f1,g1) and have the function calculate the average of c1:f1,g1 and compare it to a1.
View 6 Replies
View Related
Nov 25, 2013
I want to return the data from a list in a cell on worksheet1 if I input a variable on worksheet2. I need to avoid VBA and pivot tables.
Example, if I put "Expense" in the input cell on worksheet2, I want to return a list of each row that has "Expense" in it on worksheet1:
Worksheet 1 (ColumnA/ColumnB):
Revenue/45,000
Expense/20,000
Asset/43,000
Liability/21,000
Revenue/6,000
Expense/9,000
Expense/11,000
Liability/13,000
Worksheet 2 required output (no row gaps or spaces):
Input cell "Expense" - in A1
List required (A3:B5):
Expense/20,000
Expense/9,000
Expense/11,000
View 9 Replies
View Related
Jun 3, 2014
I have declared a 'long' variable. however; how do I change the variable data type to string if user input is not a number? how do I recognize the user input's datatype?
View 7 Replies
View Related
Aug 8, 2009
On the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.
View 4 Replies
View Related
Feb 20, 2009
I'm fairly new to macro's and VBA, by searching on the internet i've copied and pasted some code together into a macro.
But it ends in a Run-time error 91...
The macro opens a target .xls file in a selected folder, performs copy - paste actions from masterfile to targetfile.
Than it filters data in the targetfile sheet1 and copy's the results to the various other sheets; saves and closes the targetfile.
The next target file in the folder is opened and the actions are repeated in this second target file.
For the first target file this works smoothly; but for the second one (of a total of around 100) it does not copy the filter results to the other sheets in this workbook.
The error message i get is: "Run-time error 91:Object variable or with block variable not set."
When i hit debug it highlights the line "ActiveSheet.Next.Select" which, at least in the first file, seems ok.
View 9 Replies
View Related
Dec 7, 2008
I am trying to develope a "goto" page macro where the page value maybe 1,34,7A, 256C etc. I am not clear on how an inputbox value can be compared to a string variable or a numeric variable at the same time. This is what I have done, but when the texboxvalue is "7A" it doesn't work.
View 3 Replies
View Related
Feb 28, 2013
I Wrote a code which as intended to open each excel file in a folder and copy the data containing in it into a new sheet.
But While running the code the first excel file gets open, and an error message "Run Time Error 91-Object Variable Or With block Variable not set Error"
How to set the file which got opened from the folder to wbk variable.
Code:
Sub dataintoonesheet()
Dim i As Integer
Dim jk As Integer
Dim j As Integer
Dim rowstart As Integer
rowstart = 3
[Code] .......
View 9 Replies
View Related
Jul 7, 2009
When i try to run the code below i get the error message - object variable or with block variable not set-
Sub REFRESHXX()
'LIST
Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select
Selection.AutoFilter Field:=1, Criteria1:="1"
'SET RANGE
Dim sFormula1 As String
Dim sFormula2 As String
Dim sCell1 As String
Dim sCell2 As String
Dim sSheet1 As String
Dim sSheet2 As String
Dim r As Range
Dim MyRange As Range 'for testing
With Sheets("Points")
sFormula1 = .Range("CY1").Formula
sFormula2 = .Range("CY2").Formula
End With
'FORMULA IN R1C1 STYLE
strFormula = "=IF(ISNA(VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE)),0,VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE))"
'ENTER FORMULA IN ALL CELL RANGES
r.FormulaR1C1 = strFormula
'REDUCE TO VALUES
Dim ar As Range 'an area is a range
For Each ar In r.Areas 'areas are discrete, contiguous ranges of cells
ar.Value = ar.Value
Next ar
'UNLIST
Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select
Selection.AutoFilter Field:=1
End Sub
View 9 Replies
View Related
Sep 8, 2006
I need my program to:
- find the cell containing the string "Datum/Tid"
- record the column and the row of the found cell in two variables lCol and lRow
Here is my
Sub test()
Dim rFoundCell As Range
Dim lRow As Long
Dim lCol As Long
'Find method of VBA
Set rFoundCell = Range("A1")
Set rFoundCell = Worksheets("Sheet1").Range("A1:Z50").Find(What:="Datum/Tid", After:=rFoundCell, _
LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False)
'for anyof the two lines down I get the message "object variable OR block variable not set"
lRow = rFoundCell.Row
lCol = rFoundCell.Column
End Sub
View 5 Replies
View Related
Nov 21, 2006
I found this nice little bit of code for a date range search in column A but it will not work. Apparently i have not set a variable or something.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim startDate As String
Dim stopDate As String
Dim startRow As Integer
Dim stopRow As Integer
startDate = InputBox("Enter the Start Date: (dd/mm/yyyy)")
If startDate = "" Then End
stopDate = InputBox("Enter the Stop Date: (dd/mm/yyyy)")
If stopDate = "" Then End
startDate = Format(startDate, "dd/mm/yyyy")
stopDate = Format(stopDate, "dd/mm/yyyy")
startRow = Worksheets("sheet1").Columns("A").Find(startDate, _
LookIn:=xlValues, lookat:=xlWhole).Row
stopRow = Worksheets("sheet1").Columns("A").Find(stopDate, _
LookIn:=xlValues, lookat:=xlWhole).Row
Worksheets("Sheet1").Range("A" & startRow & ":A" & stopRow).Select
End Sub
View 9 Replies
View Related
Oct 11, 2011
I have master workbook that produces projected product sales for the next 3 years by company division (of which there are 3). Each division sell a variable number of products.
My master workbook is set up to produce an extract file for each division based on a single calculation worksheet within the master workbook (which is just sales by month for that product). My macro currently loops through every product that the division sells, and copies values only to the extract file with the sheet named as that product.
So as an example, the extract file I end produce for Division A which has 15 products and so 15 sheets named as that product. What I would like to do is also insert a summary worksheet in each extract file which totals these 15 sheets by month. I should add here that there also 2 other sheets in this file produced by my master workbook that should not be included in the summary sheet.
As there can be a variable number of sheets with variable product names - what is the best approach to tackling this? The data on each product sheet will be in the exact same format/layout (as they are all produced from the same single worksheet in my master).
I could create variables for each month on the product sheets to sum as the , but that would mean creating 36 variables and and having to set up a loop for each of these to keep a running total......just seems very inefficient!!
View 2 Replies
View Related
Mar 24, 2014
I am getting error in Set MyRange
[Code] .....
View 3 Replies
View Related
Nov 19, 2008
to assign a variable to equal a Constant variable, then I need to find the last unused row on the worksheet, then paste that variable down the column (1-12200 or so rows). I also need to assign Strings for the first two Rows in the target column.
View 14 Replies
View Related
Mar 12, 2009
I attempted to modify "macro_1a1ay" to look into the "comments" sheet (column a) for a specific text string. If that text string is found, I have it delete the entire row, then re-sort the page and return to the calling page. It works well as long as it finds something. When it does not find the string (i.e. like now when the page is blank) it gives me the run-time error mentioned above.
View 7 Replies
View Related
Oct 7, 2009
I am having a lot of trouble finding out why I am getting error. I believe the error is because it can't find the number. In cells C115:C314 i have the numbers 1 to 200 in order. when someone types in 1 to 9 in the text box it works, but on 10 and over i get the error ???? here is the code I have
shCalculator.Range("C115:C314").Select
Selection.Find(what:=CInt(txtPackageID), After:=ActiveCell, LookIn:=xlValues, LookAt:= _
xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Select
x = ActiveCell.Row
shCalculator.Range("ProposedMeter").Value = Cells(x, 7).Value
shCalculator.Range("Package").Value = Cells(x, 12).Value
shCalculator.Range("ProposedMeterAmount").Value = Cells(x, 30).Value
shCalculator.Range("Term").Value = Cells(x, 62).Value
shCalculator.Range("Discount").Value = Cells(x, 67).Value
shCalculator.Range("Equipment").Value = Cells(x, 72).Value
View 3 Replies
View Related
Feb 16, 2012
I want the select case list of a ComboBox to be treated as a variable in order to shorten the code size. To clarify the problem, i post the code with what i want to do, but don't know how to do it that way.
Code:
Select Case ComboBox1.ListIndex
Case 0: y = "AT"
For j = 0 To 26
Case "j": y = sheets("name").Range("A(j)") 'Range A(j) is a string, so y as well, as seen in Case 0.
Next j
End Select
Is something like this possible?
View 3 Replies
View Related
Jul 11, 2014
I have two macros that run fine separately. I want to join them, but when I do I get an Object variable or With block variable not set error.
Here's the code
Code:
Sub border_highlight_insert()
' Change heavy border to new column, change tint - keyed to year A6
With ActiveSheet
Dim i As Integer
[Code]....
View 2 Replies
View Related
Feb 6, 2009
This works fine in Excel 07 but when ran in 03 it doesn't work and I get that error message.
Sub mcrRefresh2()
Sheets("WeeklyData").Range("A1").ListObject.QueryTable.Refresh BackgroundQuery:=False
Sheets("WeeklyData").Range("aa1").ListObject.QueryTable.Refresh BackgroundQuery:=False
Worksheets("WeeklyPivot").PivotTables("PivotTable1").PivotCache.Refresh
End Sub
View 9 Replies
View Related
Nov 9, 2009
I am getting an error at this line:
Set rng5 = Range(.Cells(celle2.Row, celle4.Column), .Cells(celle2.Row, celle4.Column))
Sub UpdateNumbers()
Dim rng1 As Range
Dim rng2 As Range
Dim rng3 As Range
Dim rng4 As Range
Dim celle1 As Range
Dim celle2 As Range
Dim celle3 As Range
Dim celle4 As Range
Dim celle5 As Range
Dim flag1 As Long
Dim flag2 As Long................
View 9 Replies
View Related
Aug 28, 2006
I have a spreadsheet form with all kind of values and what I want to do is to find a data in a worksheet named "Config" based on the spreadsheet activecell value. With the find row adress I return data of another column but same row (in the worksheet) in two diferent label captions. If the spreadsheet activecell value it was found in the worksheet everything is ok but if the value is not found I'm getting the message "Object variable or with block variable not set"....
View 7 Replies
View Related
Nov 10, 2006
Say you define a public range variable called Inputworksheet and you set it to refer to the worksheet called Inputworksheet. You have a separate string variable with the value Inputworksheet. How do you get this string variable value to call/control the range variable Inputworksheet?
I am getting an excel worksheet value from a lookup function that corresponds to the name of a VBA range variable. Once I have this worksheet value, I would like to use the range variable that has the same name as the worksheet value.
View 5 Replies
View Related
