Vlookup Does Not Work In A Macro
Jun 22, 2007
why the macro "try()" in the attached workbook does not work?
I get the error message: "Unable to get the Vlookup property of the WorksheetFunction class"
Sub try()
Dim i%
For i = 1 To 35
Sheets("Sheet2").Select
myValue = Cells(i, 1).Value
Sheets("Sheet1").Select
n = WorksheetFunction.VLookup(myValue, "A1:A11", 1, True)
Sheets("Sheet2").Select
Cells(i, 2).Value = n
Next i
End Sub
View 3 Replies
ADVERTISEMENT
Aug 24, 2009
i have a made a macro that copies info to a new sheet now that is working great but if i change the name of the work book it wont work any more so i need the macro to work with what ever name i give the workbook
the current name is
AVERAGE PRICE (update 2009) Mimmos Armico 170809.xls
i have attached the code in notepad ...
View 8 Replies
View Related
Jun 23, 2014
I'm trying to count the rows of a worksheet based on the location selection. Heres what I'm using:
[Code]....
Before I add the Vlookup, I get a number of 50. I should get at least 40+, but after adding the
[Code] .....
I get "0."
I'm wondering if I need to use VLookup differently in this case ????
View 14 Replies
View Related
Jan 7, 2009
I am using the vlookup command, I have a table with 2 columns, the left one has text and the right one has numbers in currency. the vlookup works for all the text bar one, which is AX.
View 5 Replies
View Related
Sep 25, 2007
I have a VLOOKUP formula that works when searching some cells but not others when both cases should work.
Q: Does VLOOKUP have a certain maximum amount of characters it can search? If a cell contains more than this amount of characters will VLOOKUP not work?
This is what seems to be happening on my spreadsheet. The VLOOKUPS that refer to the cells with more than the average amount of characters seem to fail. The same happens with INDEX.
View 9 Replies
View Related
Mar 27, 2009
I have a VLOOKUP formula, so when the cell above (C5) has a value, it returns the value from a defined list. Simple so far and it works great when I manually input the value in the cell (C5).
The problem occurs when I change C5 to contain an AVERAGE formula? Any ideas why it will only work when there is a plain old value in there, but not a formula?
This is the VLOOKUP formula I'm using:
View 11 Replies
View Related
Jun 13, 2014
I used vlookup function in cell C3 to find ID of employees in Sheet 1 in source workbook and then, I imported the Sheet 1 in master workbook.
The vlookup didn't work in master workbook. The cell C3 in sheet 1 that I imported is blank.
The original got the ID in cell C3, then I don't see the value in cell C3 in master workbook.
View 1 Replies
View Related
Aug 21, 2014
The for loop don't work in my excel 2010 macro. Probably the problem might be the Range("Fi") construct with the variable "i"?
Dim i As Integer
For i = 4 To 10004
Cells(i, 63).Select
Cells(i, 63) = Application.VLookup(Sheets(3).Range("Fi"), Sheets(4).Range("F:AY"), 45, False)
Next i
View 3 Replies
View Related
Dec 1, 2006
i have created a Vlookup that pulls data from another work sheet, it all works fine apart from this one thing....
On a work sheet i have a lot of hyperlinks that work fine, but as soon as they get pulled over using a Vlookup, the name of the hyperlink comes accross for example "link 1" but you can not click on it to take you to the link like you can on the original one.
View 14 Replies
View Related
Feb 23, 2012
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Intersect(ActiveCell, Sheet8.Range("C16:Y1000")) Is Nothing Then Exit Sub
Dim rw As Integer
Dim arw As Integer
rw = 16
[Code] .....
As you can see, my code is located in the sheet8 worksheet object. Now, I have a few questions about this. Because I am located in the sheet8 worksheet object does that mean my code can only work in sheet8, i.e., the following won't work because I am in a Sheet8 worksheet object?
Sheet10.Range("B12) = ..... ....... .....
This is not returning a value in Sheet10? My question is how do I make my code return a value in Sheet10?
View 6 Replies
View Related
Aug 4, 2012
My problem is that my VLOOKUP formula will not return any data when it doesn't like the format of the data it's looking up.
Example: I have a spreadsheet that displays revenues earned by assets.Every month I export a table of data from an accounting software program with (a) asset numbers, (b) invoice date, and (c) monthly revenues.Then I copy the data into Tab 2 of my spreadsheet.On Tab 1 of the spreadsheet there is a table that lists Assets 100 through 120. Column A has all the asset numbers.Each month it varies as to which assets earned revenue and which one's did not. Usually between 10 and 15 assets earn revenue in any given month and about 5 do not earn revenue.On Tab 1 there is a column with VLOOKUP formulas that looks up the asset number in column A of Tab 1 and points to Tab 2 where the data that was exported from the accounting software program is located.Let's say that in July 2012 that Asset 1001 earned $35,000.On certain months, the VLOOKUP formula looks over to tab 2 and "returns" the $35,000 revenue with no problem.On other months, it will not return anything, apparently it does not like the formatting and does not "recognize" the asset number.
View 7 Replies
View Related
Apr 28, 2014
I have a question in regards to excel. I have a set of data arranged as follows:
Date System Desc
3/7/14 IPE Alphamo
3/7/14 IPE Beta
3/7/14 i3 Gammana
7/7/14 ews Pisqrt
7/7/14 IPE Jaque
8/7/14 saa Mistiqe
And I need to put them into a calendar with the following format:
3/7/14 7/7/14 8/7/14
IPE Alphamo Jaque
IPE Beta
I3 Gammana
ews Pisqrt
saa Mistiqe
I have tried index and match, vlookup and etc but it didn't work.
View 4 Replies
View Related
Jan 30, 2014
I have problem with a spreadsheet that I am trying to create.
I have a large sheet of data which is dumped in from another program. This contains our deliveries and orders etc.
Now for planning purposes, I would like to see how much of each item I have on order.
I can use VLOOKUP, but that will only give me the amount for the first order it encounters. But not the 3rd, 4th etc. I could use SUMIF but I need the dates as well. After doing some searching I think I have found a way of doing this: I can get the first easier enough:
=VLOOKUP(D$11,'purchase order'!$A$1:$K$6000,5,FALSE), this gives the first order than the another =VLOOKUP(D11,'purchase order'!$A$1:$K$6000,11,FALSE) for its date.
For the second column to check any other orders I thought I could find the cell referance for the first SEARCH: which is
A108: ="A"&MATCH(D11,'purchase order'!A:A,0).
Is there any way of using this Reference to start a new VLOOKUP. So the Lookup Range starts at this reference?? To make things harder it is on another sheet.
View 6 Replies
View Related
Oct 16, 2013
I am having difficulty with a Vlookup in Excel 2003. Basically I have converted both fields to Text using the text function =TEXT(A2,"0") and have tried matching the values but just get an #N/A error and I have also converted both back to number format but still get the #N/A error....when I do a "=" operator function it returns a FALSE value but I cannot see why as both cell are just 4 or 5 digit number.
View 3 Replies
View Related
Jun 12, 2009
Excel spreadsheet will contain a form that will consist of drop down boxes (data validation). Each drop down box will define the data that can be selected in the next drop down box.
The way I initially went about it, is creating nested IF statements. However, we all know there is a limit of 7 nested IF statements. I have 10! So below formula does not work:
=if(B5=1,F5:I5, if(B5=2, F6:I6, if(B5=3, F7:H7, if(B5=4, F8:J8, if(B5=5, F9:H9, if(B5=6,F10:G10, if(B5=7,F11:H11, if(B5=8,F12:H12, if(B5=9, F13:I13, if(B5=10, F14:K14))))))))))
I tried other workarounds such as CONCATENATE, or & signs. No luck. VLOOKUP does not work also, because there are multiple columns in col_index_num. Anything else I try gives me this message:
“The List Source must be a delimited list, or a reference to a single row or column”
What should really happen is this:
User selects value in first list box. Second list box shows values associated wih the value from the first drop down only.
View 9 Replies
View Related
Aug 15, 2009
I built an Excel Macro to pull information from my schedule and compile it within another Worksheet. The Macro below searches for an instance of "Unavailable" and then populates my Data Worksheet with the WeekDays (ie: M-W-F or ALL Week), the Details (ie: Vacation or Training) and the Name of the employee. I struggled with a way to populate my employee name as "unavailable" isn't always offset by the same amount of characters to employee name (as it is with WeekDays and Details). Instead, I collected the row in which "Unavailable" was found.
I used the Vlookup function to populate the number of Absences and it worked swell.
=VLOOKUP(C2,O:P,2,FALSE)
C2 is populated with Weekdays (ie: ALL week or M-W-F)
O contains a list of possible day combinations
P contains the number of days
I hoped to use a similar function to populate my employee names. This didn't work well a 'tall.
=VLOOKUP(A2,L:M,2,FALSE)....................
View 9 Replies
View Related
Dec 15, 2008
I've recorded a macro that copies an entire tab into a new spreadsheet then goes on the copy and paste information from one tab to another.
When I run the macro from the Tools>Macros menu it works perfectly.
But when I copy the code and add it to that of a button it fails and posts the following error: Run-time error '1001': Select method of Range class failed.
The first attachement shows the code for the macro as it is alone, and the second shows how I simply copied and pasted it into the 'view code' window of the button.
Needless to say I'm a beginner at macros and only every record them, I can usually make stuff work that way but this has me stumped!
View 12 Replies
View Related
Feb 4, 2009
To run a macro from the first tab of the workbook but have it do it work on another tab.
In the workbook in question I have a tab called "input" were certain information in updated and is linked or used in formulas on other tabs. Some of the tabs have macros that do various functions. I would like to set up one macro button on the "input" tab that would run the macros on the other tabs instead of having to run each one individually from its own tab.
Below is on of the macros that I would like to run from the "input" tab and have it update the "AP Accrual" tab
Sub CopyPriorMonthAccruals()
ActiveCell.FormulaR1C1 = "=EOMONTH(Input!R[5]C,-1)"
Columns("L:L").Select
Selection.Copy
Columns("Y:Y").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Application.CutCopyMode = False
Range("B3").Select
ActiveCell.FormulaR1C1 = "=EOMONTH(Input!R[5]C,0)"................................
View 9 Replies
View Related
Jul 1, 2014
I've got a PDF file that I was hoping to convert into an Excel sheet, but it doesn't look like that's possible, xince I'm working with only Adobe Reader, not Acrobat. Anyway, I need to compare 1 column of this report to another report that IS in Excel. Is there a way to have a macro compare an Excel file with a PDF??
View 2 Replies
View Related
May 28, 2009
I have a macro which loops through data, deleting those rows that are marked with a "Y". However - it appears to always want to do this in three stages. The first time I run the macro, it delete's a large chunk of those marked rows - but it nearly always leaves two rows. The second time I run it, it deletes one of those two remaining rows. And then I run it again and it deletes the final outstanding row. I'm sure i've done something stupid here - the code is below
View 2 Replies
View Related
Apr 17, 2007
I need to remove hyperlinks across probably 30-40 workbooks, is there a way of doing creating a macro that would do this across many instead of 1 at a time?
View 9 Replies
View Related
Sep 5, 2008
Everytime a cell (say B18) changes value I want the following to happen:
If it changes to "Annual" I want row 20 to ungroup
If it changes to "Quarterly" I want rows 22-25 to ungroup
If it changes to "Monthly" I want rows 27-38 to ungroup
From what I can see on other discussion groups I need to enter a code on the worksheet from view code... but I cant work out the code that I would need to enter.
View 9 Replies
View Related
Oct 22, 2008
I have a file with date from the whole year.
Now i want that he splits for me in the file the weeks. So that i have all the info for each week. (seperating by 2 or 3 blank rows)
A second thought was to copy paste them to a new sheet for each seperated week.
and if i just splits them by inserting blanks rows between the weeks. I was wondering if it is possible to make a pivot for each week
i thought maybe working with boxname?
View 9 Replies
View Related
Apr 7, 2009
I am sent an email that contains multiple blocks of information.
They're broken down like this:
Title
Link
ID
Department
Date
Status
Value
News
There are about 100 of these blocks of text in the email, and some of them are duplicates. What I'd like to do is copy them into Excel, and run a macro which separates them into the appropriate column and removes the duplicates. The problem that I'm running into is some of the blocks have a value (highlighted in red above) and others don't have anything at all. I'm looking for a solution that will be able to evaluate the text and if the cell after Status isn't value, I'd like it to insert a blank cell, a cell that says ignore, or something that will keep the format correct.
View 9 Replies
View Related
Sep 19, 2006
I've been using a Macro that was written in an Excel spreadsheet and it's been working fine. For some reason, the Macro does not work anymore.
The Macro is written in Visual Basic and it is launched with button.
What is the first step I should take to debug this?
I think it's something obvious I'm missing.
View 9 Replies
View Related
Jan 11, 2009
i need to work out a formula for my spreadsheet which I use to work out cutting lists for timber frames. I need it to work out if the width of a job is for eg 2400mm i need to work out how many timber studs I need so the space between each stud is between 400mm and 500mm and this will need to work for a range of different sizes of frames. I have it written at the moment and it just devides the width by 400 and gives me a amount of studs but it would work much better if it could space them between 400 & 500.
View 4 Replies
View Related
Mar 3, 2009
In a project i am compiling i need to work accurately with times to calculate the work progress of the people in the workshop thus....here goes....
I have in work book #1 (7) sheets mon to fri + complete week + a sheet where all job numbers are collected.
From monday to friday the workmen log their times as a start time and a end time. This has to be then calculated to a total hours:mins spent per job, wich in turn then has to be calculated to a total hours:mins spent per day. And the on the complete week sheet recalculated as a total time worked per week.
View 9 Replies
View Related
Feb 15, 2013
I've written a macro in an attempt to automate the advanced filtering in Excel.
VB:
Sub FilterData()
Sheets("Filter").Select
Range("B10").Select[code]....
View 5 Replies
View Related
Nov 28, 2008
I have designed a macro which consists of a form through it takes the input into excel sheet. The macro is running fine and I dont have any problems with it. The problem I am facing is that after I start running this macro, I am not able to access any other open excel files. Is there any option to make all other excel files available during running a macro?
View 3 Replies
View Related
Jul 6, 2005
I was looking at a previous post to get a progress bar to work while running
a lengthy macro. Below is the post on how to incorporate the progress bar
into your code.
That works fine expect for one thing. There is a cancel button on the progress bar, and when it is pushed the rest of my code continues running. How do I end my code if I press cancel on the progress bar?
Sub Main
Dim PB as clsProgBar
Set PB = new clsProgBar
'if your subs are being called from a userform, hide the form first using
Me.Hide
With PB
.title = "some title"
.caption1 = "Executing, this may take a while"
.caption2 = "Doing task 1"
.show
doevents...................................................
View 14 Replies
View Related
