I'm trying to count the rows of a worksheet based on the location selection. Heres what I'm using:
[Code]....
Before I add the Vlookup, I get a number of 50. I should get at least 40+, but after adding the
[Code] .....
I get "0."
I'm wondering if I need to use VLookup differently in this case ????
I am trying to count how many work orders we have created from 3 months (90 days) ago. In an effort to make the input work minimal. I wanted to use the =Today() formula and then subtract 3 months.
So I currently have =Today() in A1 and then (A1-90) in cell B1 and I get the date I want.
However, When I use a countifs formula and my criteria is
I have a VLOOKUP formula, so when the cell above (C5) has a value, it returns the value from a defined list. Simple so far and it works great when I manually input the value in the cell (C5).
The problem occurs when I change C5 to contain an AVERAGE formula? Any ideas why it will only work when there is a plain old value in there, but not a formula?
This is the VLOOKUP formula I'm using:
I have problem with a spreadsheet that I am trying to create.
I have a large sheet of data which is dumped in from another program. This contains our deliveries and orders etc.
Now for planning purposes, I would like to see how much of each item I have on order.
I can use VLOOKUP, but that will only give me the amount for the first order it encounters. But not the 3rd, 4th etc. I could use SUMIF but I need the dates as well. After doing some searching I think I have found a way of doing this: I can get the first easier enough:
=VLOOKUP(D$11,'purchase order'!$A$1:$K$6000,5,FALSE), this gives the first order than the another =VLOOKUP(D11,'purchase order'!$A$1:$K$6000,11,FALSE) for its date.
For the second column to check any other orders I thought I could find the cell referance for the first SEARCH: which is
A108: ="A"&MATCH(D11,'purchase order'!A:A,0).
Is there any way of using this Reference to start a new VLOOKUP. So the Lookup Range starts at this reference?? To make things harder it is on another sheet.
i need to work out a formula for my spreadsheet which I use to work out cutting lists for timber frames. I need it to work out if the width of a job is for eg 2400mm i need to work out how many timber studs I need so the space between each stud is between 400mm and 500mm and this will need to work for a range of different sizes of frames. I have it written at the moment and it just devides the width by 400 and gives me a amount of studs but it would work much better if it could space them between 400 & 500.
View 4 Replies View RelatedI am want to copy a formula across several work sheet and have the formula always take data from previous work sheet.
2) I am working with this formula =C12+INDIRECT((MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,256)-1)&"!"&"C12")
and it comes from this thread http://www.excelforum.com/excel-gene...orksheets.html. I have included a worksheet attachment that has explanations
I have a Countifs formula that is returning a zero "0",
=COUNTIFS($B$4:$U$4,$A29,$B$10:$U$10,B$18), and it should return a 1.
The manual calculation is turned on and I have tried the F9 and no change in the value returned.
I have a problem with a cumulative countif and offset formula that I am unable to solve. See the attached spreadsheet for an example of the dataset I get out from our systems.
I want the formula to be fully automatic, so when I change the month in column K2, it will automatically count all the different outlets in column B based on criteria in column L3 and downwards. The dataset will be updated monthly obviously.
I believe that it could be solved with the usage of a countifs + offset formula or something similar.
The main idea of the spreadsheet is to track the movement of customers between different chains. It is thus important that customers that show up in January will not be counted again in February or March, thus creating an unique countif list based on a given month.
Number of outlets example.xlsx
I am having trouble converting the following Countifs formula developed in 2007 to work in 2003 Excel.
Basically, I want to count the frequency of "N" in 'Data_Q2 2008'!$S$2:$S$9806, where 'Data_Q2 2008'!$B$2:$B$9806 = 'Metric Upload'!C2.
'Data_Q2 2008'!$B$2:$B$9806 is a list of physicians. 'Metric Upload'!C2 is a pick list for selecting the physican that is in the larger data set using Data Validation.
I currently have 6 formula (see below) that I want to add another variable for. The formulae add together letters in B1:B15 cross referenced against numbers in A1:A15. The first formula adds together the A's and O's in B1:B15 and cross references them with with cells beginning with 5 or 6 in the same row, A1:A15 down.
=SUM(COUNTIFS(B$1:B$15,"A",A$1:A$15,{"5";"6"}&"*")+COUNTIFS(B$1:B$15,"O",A$1:A$15,{"5";"6"}&"*"))
=SUM(COUNTIFS(B$1:B$15,"B",A$1:A$15,{"5";"6"}&"*"))
=SUM(COUNTIFS(B$1:B$15,{"A";"O"},A$1:A$15,"4*"))=SUM(COUNTIFS(B$1:B$15,"B",A$1:A$15,"4*"))
=SUM(COUNTIFS(B$1:B$15,"A",A$1:A$15,{"1";"2";"3"}&"*")+COUNTIFS(B$1:B$15,"O",A$1:A$15,{"1";"2";"3"}&"*"))
=SUM(COUNTIFS(B$1:B$15,"B",A$1:A$15,{"1";"2";"3"}&"*"))
I want to cross reference each of these with a Gender variable (denoted as M or F, for male & female) in the C1:C15 range. Using the last formula as an example should tell me how many M's or F's in the range C1:C15 had B and began with either 1,2 or 3.
I have a query from an access DB that I pull into an excel sheet automatically every 15mins. Column G contains a list of 6 digit customer reference numbers and column C contains a list of the users that have modified records for that customer.
I use a summary sheet to count the number of customers a user has modified records for in that day. The trouble I am having is counting unique records using the COUNTIFS function. In my database if a user changes a record and hits save 10 times that will create 10 records. I only want to count this as 1. I am using the following formula but it doesn't seem to like the 2nd range and criteria in the countifs bit.
=SUM(IF(COUNTIFS('Daily Loss Data'!G2:G1500,'Daily Loss Data'!G2:G1500,'Daily Loss Data'!C2:C1500,"John Smith*")
=0, "", 1/COUNTIFS('Daily Loss Data'!G2:G1500,'Daily Loss Data'!G2:G1500,'Daily Loss Data'!C2:C1500,"John Smith*")))
Daily Loss Data Sheet Notes: Column C = user, Column G = Customer Ref.
I am using an IF statement because my range changes after each query refresh so contains zero's that I obviously do not want to count.
Have table with five columns and five rows. The columns(C4:H4) hold Systems, Systems is a defined range, and rows (B5:B9) hold staffer names, Staffer is a defined range. Cell A5 holds period, by quarters, ie, Q1-Q4.
At present am using =COUNTIFS(Staffer,$B$5,System,C4,Q,$A$5). This works fine but as you can see I must change the Staffer starting reference $B$5, with each new row.
formula that changes column and row automatically as I drag down and across.
I know this should be straightforward, but just can't "hack the logic", whether using "Countifs" oor "SumProduct" formulae.
Attached file 140509 String Criteria.xlsx file has database of three fields (Date, Route number and Part number)
I need the formula that totals number of rows meeting three criteria:
(a) A specific date from Col A
(b) A specific number from Col B
And the part I can't sort out:
(c) Any cell containing a "string" in Col C (so needs to count the "core" even if it has a prefix or suffix).
E.g. How many rows have "Date x" in Col A, "Route Y" in Col B and a cell containing "123" in Col C?
I have attached a sample workbook which shows what I am trying to extract from sheet "Service Reminders 2014". In worksheet "Results" cells b11:e11 I am trying to extract the amount of vehicles with within age ranges provided that have a magic number attached which is pretty easy everything >0 is a proper magic number and also the amount of vehicles in each age range that have "Booked" associated within the range of "Service Reminders" Y2:AH5000, The formula works fine until I add the final criteria and then it give me a #VALUE!
View 14 Replies View RelatedI have a large metrics spreadsheet that has thousands of formulas using SUMPRODUCT. We are using Excel 2007/2010 now and I wondered if there was a way to convert these type of formulas to use the SUMIFS or COUNTIFS. I can do simple ones with 1 or 2 criteria where its AND, but then there is a combined OR and AND like this one has I cannot get them to work right, am I stuck with using SUMPRODUCT? My hope was to speed up the overall calculation speed. Note: The data spreadsheet 'Sheet2' contains 64555 rows, I write these formulas using VBA so that the range is finite to the actual data range is why you see 64555.
=SUMPRODUCT(--('Sheet2'!$J$3:$J$64555=$A6),--(('Sheet2'!$I$3:$I$64555="HOC")+('Sheet2'!$I$3:$I$64555="MGN")))
I have attendance tables that has column Y showing the shift to be worked and column Z showing any absentees. I used the following formula to count the number of people off per period.
{=SUM(COUNTIFS($Y$5:$Y$29,AM,$Z$5:$Z$29,$W82),(COUNTIFS($Y$36:$Y$60,AM,$Z$36:$Z$60,$W82)))}
in the above formula AM relates to a list of morning shifts.
The problem I have now encountered is that the system at work is still using excel 97 - 2003 which does not recognise Countifs.
way to adapt the formula to be compatible with Excel 97.
Using COUNTIF/COUNTIFS how to counting data with 3 mode ;
name
property
checking
[Code]....
I want to count with criteria based on adjacent value "name" column related with "checking" column
1) counting data "name" with "yes" criteria?
2) counting data "name" with "yes" & "no" criteria?
3) counting data "name" with blank "" criteria?
4) counting data "property" with criteria contains "name" and "yes" criteria
why the macro "try()" in the attached workbook does not work?
I get the error message: "Unable to get the Vlookup property of the WorksheetFunction class"
Sub try()
Dim i%
For i = 1 To 35
Sheets("Sheet2").Select
myValue = Cells(i, 1).Value
Sheets("Sheet1").Select
n = WorksheetFunction.VLookup(myValue, "A1:A11", 1, True)
Sheets("Sheet2").Select
Cells(i, 2).Value = n
Next i
End Sub
The attached file Countifs issue.xlsx shows my attempt to construct a "CountIfs" formula that finds the one record out of ten that matches the following criteria:
a) Col A has 10 IDs. 3 of them are between 40 - 49, and another 2 are alphanumeric. This formula SHOULD identify these 5:
=COUNTIFS(A2:A11,">39",A2:A11,"<50",A2:A11,"4AB",A2:A11,"40C")
Doesn't work, It finds the 3 numerics but returns "0" when the two alpha-numerics are added.
b) Col B has a list of dates. 5 of the 10 are this month. This formula SHOULD identify them:
=COUNTIFS(B2:B11,(EOMONTH(NOW(),-1)+1),B2:B11,(EOMONTH(TODAY(),0)))
Doesn't work. It returns a value of "0".
c) Col C shows the Status for each record. 5 are "A" and 5 are "B". The following formula DOES find all the "B"s
=COUNTIF(C2:C11,"B")
But obviously I need the full formula to find the one record out of the ten that meets all the criteria.
in (a) and (b) and enable me to combine all three sections.
I am trying to populate some results using countifs formula with multiple criteria. below is the formula am using and the last two criterias are dates
=COUNTIFS('Unproccessed CIT'!$B$5:$B$411,Summary!$A$4:$A$35,'Unproccessed CIT'!$G$11:$G$417,"<>"&"closed",'Unproccessed CIT'!$A$5:$A$38,">="&$C$2,'Unproccessed CIT'!$A$5:$A$38,"<="&Summary!$E$2)
Results:
#VALUE!
I am using the vlookup command, I have a table with 2 columns, the left one has text and the right one has numbers in currency. the vlookup works for all the text bar one, which is AX.
View 5 Replies View RelatedI have a VLOOKUP formula that works when searching some cells but not others when both cases should work.
Q: Does VLOOKUP have a certain maximum amount of characters it can search? If a cell contains more than this amount of characters will VLOOKUP not work?
This is what seems to be happening on my spreadsheet. The VLOOKUPS that refer to the cells with more than the average amount of characters seem to fail. The same happens with INDEX.
Because countif cannot be used across multiple tabs, I'm using the following workaround where "MySheets" is the range of tabs and E8 is the cell I want "counted".
=SUMPRODUCT(COUNTIF(INDIRECT("'"&MySheets&"'!E8"),"Fully implemented"))
This works perfectly, except that I really need COUNTIFS... I want Excel to count either "Fully implemented" or "Partially implemented" when in E8. I cannot get the formula to work and keep getting an error message.
=SUMPRODUCT(COUNTIFS(INDIRECT("'"&MySheets&"'!E8"),"Fully implemented",(INDIRECT("'"&MySheets&"'!E8"),"Partially implemented")))
I used vlookup function in cell C3 to find ID of employees in Sheet 1 in source workbook and then, I imported the Sheet 1 in master workbook.
The vlookup didn't work in master workbook. The cell C3 in sheet 1 that I imported is blank.
The original got the ID in cell C3, then I don't see the value in cell C3 in master workbook.
The for loop don't work in my excel 2010 macro. Probably the problem might be the Range("Fi") construct with the variable "i"?
Dim i As Integer
For i = 4 To 10004
Cells(i, 63).Select
Cells(i, 63) = Application.VLookup(Sheets(3).Range("Fi"), Sheets(4).Range("F:AY"), 45, False)
Next i
i have created a Vlookup that pulls data from another work sheet, it all works fine apart from this one thing....
On a work sheet i have a lot of hyperlinks that work fine, but as soon as they get pulled over using a Vlookup, the name of the hyperlink comes accross for example "link 1" but you can not click on it to take you to the link like you can on the original one.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Intersect(ActiveCell, Sheet8.Range("C16:Y1000")) Is Nothing Then Exit Sub
Dim rw As Integer
Dim arw As Integer
rw = 16
[Code] .....
As you can see, my code is located in the sheet8 worksheet object. Now, I have a few questions about this. Because I am located in the sheet8 worksheet object does that mean my code can only work in sheet8, i.e., the following won't work because I am in a Sheet8 worksheet object?
Sheet10.Range("B12) = ..... ....... .....
This is not returning a value in Sheet10? My question is how do I make my code return a value in Sheet10?
My problem is that my VLOOKUP formula will not return any data when it doesn't like the format of the data it's looking up.
Example: I have a spreadsheet that displays revenues earned by assets.Every month I export a table of data from an accounting software program with (a) asset numbers, (b) invoice date, and (c) monthly revenues.Then I copy the data into Tab 2 of my spreadsheet.On Tab 1 of the spreadsheet there is a table that lists Assets 100 through 120. Column A has all the asset numbers.Each month it varies as to which assets earned revenue and which one's did not. Usually between 10 and 15 assets earn revenue in any given month and about 5 do not earn revenue.On Tab 1 there is a column with VLOOKUP formulas that looks up the asset number in column A of Tab 1 and points to Tab 2 where the data that was exported from the accounting software program is located.Let's say that in July 2012 that Asset 1001 earned $35,000.On certain months, the VLOOKUP formula looks over to tab 2 and "returns" the $35,000 revenue with no problem.On other months, it will not return anything, apparently it does not like the formatting and does not "recognize" the asset number.
I have a question in regards to excel. I have a set of data arranged as follows:
Date System Desc
3/7/14 IPE Alphamo
3/7/14 IPE Beta
3/7/14 i3 Gammana
7/7/14 ews Pisqrt
7/7/14 IPE Jaque
8/7/14 saa Mistiqe
And I need to put them into a calendar with the following format:
3/7/14 7/7/14 8/7/14
IPE Alphamo Jaque
IPE Beta
I3 Gammana
ews Pisqrt
saa Mistiqe
I have tried index and match, vlookup and etc but it didn't work.
I am having difficulty with a Vlookup in Excel 2003. Basically I have converted both fields to Text using the text function =TEXT(A2,"0") and have tried matching the values but just get an #N/A error and I have also converted both back to number format but still get the #N/A error....when I do a "=" operator function it returns a FALSE value but I cannot see why as both cell are just 4 or 5 digit number.
View 3 Replies View Related