Vlookup In Macro With Variable Offset Range
Jun 13, 2008
The message shows me "Can not get the vlookup property of worksheetfunction class" and don't know the reason. The 'plancomm' and 'bonus' is the range name in different worksheets of the same workbook as the rngcell.
Case Else:
.Offset(0, 1).Value = WorksheetFunction.VLookup(rngCell.Offset(0, -3), Range("plancomm"), 2, 0)
.Offset(0, 2).Value = WorksheetFunction.VLookup(rngCell.Offset(0, -4) & rngCell.Offset(0, 1), Range("bonus"), 6, 0)
View 3 Replies
ADVERTISEMENT
May 27, 2008
I'm trying to use an offset from a Named Range as my source cell in a vlookup but get a -1004 Object not defined error. When Debugged the Range.Formula appears to be blank when queried. Using Record a Macro the Reference to a named range worked fine but I could not test for an offset or the use of the range reference. What can I do to use to make this work
Range.Formula="=vlookup(Range(""SomeName"").Offset(1,0),DataRange,2,False)"
View 7 Replies
View Related
Nov 16, 2007
I am trying to do a vlookup that currently looks as follows:
Range("C2").Formula = "=VLOOKUP(A2,SAP!A$2:AA$42,2,FALSE)"
However, the selection of the table_array (SAP!A$2:AA$42) is a set value. Instead I would like to select all the data that is on sheet SAP. The idea is that the data set will not always be A2:AA42, so I need to make this part variable.
Normally I would use
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlToRight)).Select
to select the entire data set.
View 9 Replies
View Related
Jan 27, 2012
I need to lookup a value in one of 20 lookup tables. Each table has a range name that is stored in a cell. In the formula below, U79 contains the number I want to lookup and cell P79 has the variable range name. Both formulas give me an N/A error. When I enter the actual range name in the formula, it works. how to use a variable range name?
=INDIRECT(VLOOKUP(U79,P79,2,FALSE))
=VLOOKUP(U79,P79,2,FALSE)
View 3 Replies
View Related
Feb 25, 2005
I write quite a few macros that require a vlookup formula. The table array is often dynamic which means I must change my program. I am trying to find a way to create the formula to accomodate the growth of the table array. I can count the number of rows in the table by the counta function, but then when I try to use that variable in the formula it bombs.
View 7 Replies
View Related
Sep 28, 2009
I'm trying to write a vlookup where both the lookup value and the table_array are variables. What I'm trying to do is get a set of dependent drop down boxes to serve as the input for vlookup. The first drop down box contains a list of named ranges and the second contains a list of possible search values. If I manually input the name the function works, but if I refer to it with a cell reference or the indirect funtion it fails. For example:
View 2 Replies
View Related
Feb 7, 2014
I used VLookup function in macro. Lookup value is a variable name. I don't know how to use variable name inside of VLOOKUP function.
Use VLOOKUP function in macro with Variable Name for Lookup value
Function CC(CName As String)
ActiveCell.FormulaR1C1 = "=VLOOKUP(cname,'[Structure File.xlsx]Sheet1'!C1:C3,2,FALSE)"
End Function
How to use CName variable inside of Vlookup function.
View 3 Replies
View Related
Feb 19, 2010
I am trying to write a macro which will autofill specific columns. The macro will set the range from the start of my autofill to the end of my autofill as a constant range.
The problem I need to get around is the end of my range can always change each time I run the macro. For instance, the first time I run the macro I may only need to autofill from row 4 to row 15. The next time, I may only need to autofill from row 4 to 23 (because of user updates). How can I make the end of my range not be a constant address but variable?
View 6 Replies
View Related
Feb 4, 2014
I am trying to find a macro that can search a sheet for any cell that contains the text "Not on AOI" selects a range that contains that cell, 81 rows below, and 2000 columns to the right, then cuts the selection and pastes it 162 rows below the original cell where the text was found. What's hard is that the number of columns between the "Not on AOI" cells is variable.
I'm very new to excel macros and the parts I think I've put together are:
Cells.Find("Not on AOI", After:=ActiveCell, LookIn:= _
xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:= _
xlNext, MatchCase:=True).Activate
[Code].....
View 1 Replies
View Related
Jun 24, 2013
can i make offset with variable value, i am trying to make a code to Auto filter data then copy it to another sheet.
then take offset of number of rows of previous criteria and copy next set of data
my code is
Sub Test()
Dim rng1 As Range
Dim rng2 As Range
Dim rng3 As Range
[Code].....
When i use this Code it offsets second data paste place to be very far away, like at cell 69 while it should be only at cell 6 or 7 based on L value, is that right, there is another way to do it ?
View 2 Replies
View Related
Jun 14, 2014
I am trying to make a program and in this program I am trying to use an offset. In that offset I want the column offset be = to a Integer variable I have created but I am getting the "red text".
How can I capture the weeknumber integer, entered into the input box as the second offset variable?
Dim ForumMember As String
Dim ForumMemberRange As Range
Dim ForumMemberLocal As Range
Dim WeekNumber As Integer
'worksheet and book activation
Workbooks("Trivia Point Account").Activate
Worksheets("Game 3").Activate
[code].....
View 5 Replies
View Related
Sep 2, 2009
The initial code was from this forum. I modified it so it wont work
The code finds the first instance but none after, why?
View 3 Replies
View Related
Oct 25, 2009
When I'm recording a macro it records the range I'm currently doing... example - whatever figure is in Column A I want to multiply by 2 - the result being in Column B. I have figures down to Row 10 in Column A, so the range is A2 - A10. (A1 being a header).
Is there a code I can put in the macro that doesn't set the range to only A2 - A10, and will multiply anything that's found in Column A - except for when the Cell is blank?
View 9 Replies
View Related
Aug 23, 2006
I have tried various syntaxes but nothing is working for me. I am using XL 2000 so it doesn't have the relative address function in the macro! So here is what I have
ActiveCell.Range("A1").Select
ActiveCell.R1C1
Range("R1C1:R1C85").Select
Selection.Copy
Selection.PasteSpecial Paste:=xlValues
Application. ScreenUpdating = True
Range("A1").Select
I need to be able to select from the originating cell which will always be in "T" Col thru to "CZ" col but will be on different rows.
View 2 Replies
View Related
Oct 26, 2012
Any way I could SUM a YTD using VLOOKUP and OFFSET? In another worksheet, I need to reference Account Income #, go to the worksheet shown below, find the Account Income number, Offset and sum of the columns in that row to the YTD figure.
Attached is a sample : EXAMPLE.xlsx
Account
Income
9/30/2012
8/31/2012
7/31/2012
6/30/2012
5/31/2012
[Code] ......
EXAMPLE.xlsx
View 4 Replies
View Related
Feb 27, 2007
i have a table with customers and the rentals they have made. in the table it has their customer number and then the item code of the item they have rented out.
i want to have a table that brings up the item codes of what they have rented but with a vlookup it only brings back the first item they have rented and not the ones after that.
View 14 Replies
View Related
Jul 8, 2013
I have a data set that is laid out like this below:
Jan 12 Feb 12 Mar 12 Apr 12 May 12 Jun 12 Jul 12 Aug 12 Sep 12 Oct 12 Nov 12 Dec 12
Revenue $1000 $1000 $1000 $1000 $1000 $1000 $1000 $1000 $1000 $1000 $1000 $1000
On another sheet I want to find the Revenue and sum the Months Jan 12 to May 12.
So I would like to have my answer read $5000.
I am having a hard time doing the Vlookup and summing a range at the same time.
View 3 Replies
View Related
Apr 7, 2007
I need to add offset to this formula to return the value 1 row down. So it actually would return the values in I39
=VLOOKUP(A34,Correct!$A$2:$I$312,9,0)
View 9 Replies
View Related
Sep 20, 2007
How do I use VBA to send the value of a cell, for example, cell J77 to the variable "mastervalue1"?
I have a spreadsheet that has a column with dates ( in the format "mmm-yy") and next to it a column that has values. I want to pass the value of the cell that is next to the date cell that contains today's month to a variable in VBA. Auto Merged Post;here's an example of my spreadsheet
View 9 Replies
View Related
Dec 15, 2006
I download some data from a commercial real estate site about properties and their owners and process it in Excel. Out of 1,000 records, maybe 20 or so will have the data end up in the wrong fields. This is an artifact of the data source the commercial site uses.
Anyway, what I need to do is to get the data back in the right fields. So, I sort the data to pull together at the top of the sheet all the records with data where it's not supposed to be. So far, so good.
Now from one data download to another the number of records which end up in the sort will be different. And, here's the problem.
I try to record a macro mimicking my selection of the range of the data that needs to be moved. Fine, no problem. And, on the same dataset it works like a charm. But as soon as I put a different dataset into the spreadsheet with a different number of records that need to be corrected the macro fails.
Apparently, this is because the macro has been defined with a certain range of cells selected in the first data set and this same range is used for subsequent datasets with different numbers of errant records.
Basically, what I'm trying to record in a macro is the Shift/Control End and Shift/control arrow commands. But they don't record as such.
View 9 Replies
View Related
Oct 12, 2011
I wish to copy a range which has the variable adderss in a cell.
Example the address is located in D2 and the address in that cell is B4:R113
I want to select the information in D2 for copying.
View 4 Replies
View Related
Nov 25, 2009
1. I need to define a variable range of all the USED cells in a column (starting at row 2 as the row 1 is the header)
2. I need to do this for columns A through to P inclusively (all using the same lastrow reference as that of column A)
3. I need to call the range name by the contents of the header in that column (Row 1)
4. Some of the data in the header row (row 1) contains spaces - can we change this to an underscore for the range name only?
5. Does a range only work for the active worksheet? Because i will have multiple worksheets, all with the exact same information in row 1, but different numbers of rows (and different data as well), but i will need the range defined on each worksheet......
I've found the following code and thought it was it, but it only defines on 1 worksheet, and for some reason only defines ranges for columns 1 and 2. Also it defines the range as A1:A65535 - not the USED range.....
View 9 Replies
View Related
Aug 15, 2007
I am trying to write a very basic macro to copy and paste, but when I record the keystrokes, step 4 (see below) seems to be recording absolute cells and not relative (?). At any rate, I can't seem to figure out how to get it to select the text the way I want it to. These are the keystrokes I want:
1. Ctrl-c in the current cell <copy the current cell>
2. DownArrow <move down one cell>
3. Shift(hold)-End-Down <select the blank spaces from here down until the next occupied
cell>
4. Shift(hold)-Up <move the selection up one from the bottom to exclude the occupied cell>
5. Ctrl-v <paste>
6. End-Down <move down to the last occupied cell>
I have set the record tool to record "relative" references.
Below is the code that was recorded. It's line 5 that's not working - how do I fix it? What is the command to tell the program to press the shift key and an up arrow?? Such a simple thing, and yet I can't find the answer anywhere! Things sure have gotten complicated since the old Lotus 1-2-3 macro language...
Sub Fill()
Selection.Copy
ActiveCell.Offset(1, 0).Range("A1").Select
Range(Selection, Selection.End(xlDown)).Select
ActiveCell.Range("A1:A17").Select
ActiveSheet.Paste
Selection.End(xlDown).Select
End Sub
View 8 Replies
View Related
Jun 16, 2008
I have 2 columns 'C' and 'D' which I want to apply Conditional Formatting to (i.e. colour the background of the cell in column 'D' for the respective row in colum 'C') if they contain different values. I have the following
Sub CellCCondFormatting()
Dim j As Long
Range("C2").Select
j = Range("C2"). CurrentRegion.Rows.Count
MsgBox ("1st: " & j)
Range("C2:C" & j).FormatConditions.Delete
Range("C2:C" & j).FormatConditions.Add Type:=xlCellValue, Operator:=xlGreater, _
Formula1:="=D" & j
Range("C2:C" & j).FormatConditions(1).Interior.ColorIndex = 3
Range("C2:C" & j).FormatConditions.Add Type:=xlCellValue, Operator:=xlLess, _
Formula1:="=D" & j
Range("C2:C" & j).FormatConditions(2).Interior.ColorIndex = 4
MsgBox ("2nd pass: " & j)
End Sub
It iterates through all rows in my CurrentRegion OK but the Conditional Formatting 'formula' operates on the wrong value in column 'D'. For example, when viewed via menu option Format > Conditional Formatting... row 2 column 'D's Conditional Formatting value is D1714, row 3 column 'D's value is 'D1715' and so on....................
View 2 Replies
View Related
Jan 7, 2014
I have a worksheet where I want to have one column of state abbreviations (entered by the user), and a second column of state-specific information that will be entered from a lookup table--named "StatePrefixes". Here is my code so far:
VB:
Public Sub cmdSelectState_Click()
Dim St As String
St = ActiveCell.Value
ActiveCell.Offset(0, 1).Value = Application.WorksheetFunction.VLookup(St, StatesPrefixes, 2, False)
End Sub
As is the code is generating a run-time error "Unable to get the Vlookup property of the WorksheetFunction class. If I remove the reference to the WorksheetFunction class I then receive a value of "#N/A" in my worksheet.
View 4 Replies
View Related
Apr 21, 2013
I've recorded this Macro to sort the cells in a column alphabetically if any cells have content.
I would like to use the Macro on the whole workbook however the AB column range varies between the worksheets.
How should I adapt this Macro to sort simply to the END of AB column??
' PWRII Macro
'
'
Cells.Select
[Code]....
View 5 Replies
View Related
Jun 12, 2008
I am working with a large report that needs to be broken out and sent as separate files to recipients for confidentiality purposes. I'd rather not use views/protection since there are many different ways particular people need to see the data, plus it is a very large file and flattening it works to everyone's advantage. My goal is a macro that will copy each tab into separate workbooks, paste special values, and save as each as Cell A1 (or the tab name-same thing). I have tried recording macros and editing (I'm very new to VBA) many times but it's a mess.
View 2 Replies
View Related
Apr 24, 2014
How to use offset in combination with match and vlookup. Well I think I have to use Offset to find the value ( cell with time in it).
I have in my workbook 3 sheets: Sheet1, Sheet2 and Agents.
In 'Sheet2' every week I upload a report with persons and every person has a certain amount of time behind their name.
In 'Sheet1' I want to get (load) the data: the person and time from 'Sheet2'.
In 'Agents' I only match the names. That's because the names in the report I upload in 'Sheet2' have a different lay-out then the ones I use.
The matching and to get the names correct in 'Sheet1' Is no problem. Though I get stuck with the cells where the time is placed in the report I upload in 'Sheet2'.
The persons are in Column C ( C7, C26, C45, C64 etc) but the value I also need to get is not in line behind the names. It's In the 7th row under the name and in Column L.
Example:
Wiebe (C7) time ( L14)
Gary (C26 time ( L33)
Kay (C45) time ( L52)
What I use to match the names and get data is this formula.
=INDEX(Sheet2!$A:$L;MATCH(VLOOKUP(Sheet1!$A2;Agents!$A:$E;5;0);Sheet2!$C:$C;0);MATCH(B$1;Sheet2!$1:$1;0))
Is it possible to use Offset ( or something different) in this formula to also get the cells with the time ( matching with the right person)
View 14 Replies
View Related
Apr 16, 2009
On the attached spreadsheet, i am trying lookup the selection name in column A on the summary sheet and search through column A of the other three worksheets adding together the three answers but something isn't working as the end answer is incorrect. I have tried vlookup and also tried combining offset/match but neither way i am getting the correct answer. I removed a lot of the data to simplify things and changed the figures to fictional ones for privacy reasons.
View 2 Replies
View Related
Mar 3, 2014
I am trying to paste data into cells that are offset from specific data in my excel sheet.
The code I've got so far is:
[Code] ....
What I am aiming for is to search my Columns G and H that contain the values 1 & 1. Then from the cells that contain those variables, move 2 row up and 7 columns to the left and then paste on that active cell.
I am completely new to VBA so im sure there plenty wrong with this VBA script but so far ive managed to paste the data but it just pastes across the whole row instead of just the cells ive copied.. now i just get errors on the script.
View 5 Replies
View Related
