Pasting Cells Using Offset Command Based On Variable Cell Data?

Mar 3, 2014

I am trying to paste data into cells that are offset from specific data in my excel sheet.

The code I've got so far is:

[Code] ....

What I am aiming for is to search my Columns G and H that contain the values 1 & 1. Then from the cells that contain those variables, move 2 row up and 7 columns to the left and then paste on that active cell.

I am completely new to VBA so im sure there plenty wrong with this VBA script but so far ive managed to paste the data but it just pastes across the whole row instead of just the cells ive copied.. now i just get errors on the script.

View 5 Replies


ADVERTISEMENT

Cell Offset Based On Number Of Cells In Selection

Apr 15, 2014

I am working on a macro and this section has me stumped. The worksheet columns are A:AE. Occasionally, the procedure needs to select a varying number of cells in a row which don't always fall in the same column, count the number of cells in the selection and then paste the data on the row above it, in column ("AE" minus the Selection Count).

Here is what I have so far:

[Code] .....

The red-bold bracketed code is the syntax I'm not able to figure out how to phrase.

View 11 Replies View Related

Making A Command Button Visible Based On Data In Cell

Oct 15, 2007

I have a data validation list in cell D11 on sheet "Data Entry" and a command button "btnMultipleProperties" that I only want visible if "Multiple" is selected in "D11" I have the below code in "This Workbook" in VBE but it doesn't work. What did I miss?

Private Sub Worksheet_Change(ByVal Target As Range)
With Sheets("Data Entry")
If [D11].Value "Multiple" Then
btnMultipleProperties.Visible = False
Else: btnMultipleProperties.Visible = True
End If
End With
End Sub

View 8 Replies View Related

Find Date & Pass Offset Cell To Variable

Sep 20, 2007

How do I use VBA to send the value of a cell, for example, cell J77 to the variable "mastervalue1"?

I have a spreadsheet that has a column with dates ( in the format "mmm-yy") and next to it a column that has values. I want to pass the value of the cell that is next to the date cell that contains today's month to a variable in VBA. Auto Merged Post;here's an example of my spreadsheet

View 9 Replies View Related

Place Value In Multiple Cells Based On Cell Variable

Nov 26, 2009

I'm trying to place the value of "X" in multiple cells based on a cell variable (i). For example, if (i) is evaluates to 35, the following code ...

View 8 Replies View Related

Assigning A Variable And Pasting Variable To Last Unused Column

Nov 19, 2008

to assign a variable to equal a Constant variable, then I need to find the last unused row on the worksheet, then paste that variable down the column (1-12200 or so rows). I also need to assign Strings for the first two Rows in the target column.

View 14 Replies View Related

Pasting Into Find Command

Jun 19, 2009

I have recorded a macro in Excel that copies the contents of a cell in one worksheet, then goes to another, selects a column, runs the Find command and then pastes the clipboard contents into the "Find what" field.

Naturally when I read the code back in visual basic the macro is now programmed to always search for the data I copied from the original cell. The problem is the data in that cell changes all the time so I need it to always copy whats in there and paste it into the Find what field.

View 6 Replies View Related

To Merge Variable Number Of Cells Into One Single Cell Based On Criteria

Sep 19, 2009

Heres an example of my data:

A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
4330DDDDDDD
5330EEEEEEEEE
6440FFFFFFFFF
7440GGGGGGG
8550HHHHHHH

I need your help to figure out how to merge the above data to look like this in new blank worksheet using a VBA macro:

A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
DDDDDDD
EEEEEEEE
4440FFFFFFFFF
GGGGGGG
5550HHHHHHH

View 10 Replies View Related

Auto Generate A Comment Box Based On A Cell Value That Has Variable Reference Cells

Jan 30, 2010

I have been given the following code and it works great. I now need to adapt it to the following scenario: In the attached sheet, the user has to select either, "Suburban" or "Squad" in row 5. If the user selects, "Suburban" I need this script to compare the values they enter in a given row to the value in column "B".
If the user selects, "Squad" I need this script to compare the values they enter in a given row to the value in column "C".

Look at row 48, for example. If the user enters, "Suburban" in cell D5 then the value they enter in cell D48 should equal "1". If it does not equal "1" then it should proceed with the adding of a comment. Conversely, if the user enters, "Squad" in cell D5 then the value the enter in cell D48 should equal "2". If it does not equal "2" then it should proceed with the adding of a comment.

View 5 Replies View Related

Offset Based On Division Of 2 Cells

Apr 23, 2008

I want to use offset in a macro based on a callvalue. for example I have

200 in 'A1'
25 in 'B1'

current selected cell is 'C1'. I want to go 8 (200/25) cells down. something like offset(A1/B1,0).

View 3 Replies View Related

Copying And Pasting Data In Selected Cells

Sep 28, 2013

i have selected cells from workbookA (b2:b8) , i want those selected cells gets pasted in workbookB in a transpose way.

like B1 cell in workbookA pasted into A2 cell in workbookB , B3 cell pasted into D2 , B4 cell pasted into B2 and B5 cell pasted into G2......

i have code but not working

Code:

Private Sub CommandButton1_Click()
Dim STRFILENAME As String
Dim O As Workbook
Windows("Copy of Bill Schedule Form1.xlsm").Activate
Sheets("Sheet1").Activate
ActiveSheet.Range("b2:b8").Select

[Code]....

View 3 Replies View Related

Stop Pasting Values In Data Validation Cells

Jul 10, 2014

I have a data validation list in col A.

I don't want ppl to be able to paste values in cell - them must either type the data or select from list.

Also - the sheet is protected but col a is open

have tried...without success

Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Target, Range("A1")) Is Nothing Then
Application.CutCopyMode = True
End If
End Sub

View 9 Replies View Related

Preventing Pasting Of Data Over Cells With Validation Lists

Aug 31, 2006

I've got a table that has to be manipulated by multiple users. Within the table I have several column ranges with validation lists (in drop down boxes) in order to limit responses. However, I'm finding that most of the users are pasting data in from other sources that may not have been in the validation list, or may be in a different format, etc., and it essentially undermines the reason for using the validation.

I've tried protecting the sheets using various options and tried looking around online for a solution, but I'm not finding how to get around this.

View 9 Replies View Related

Find Last Cell In Range, And Changing Another Cell Based On Offset Text

May 4, 2009

If i have a range say E12:O12 and want to find the last cell before blank, lets say it finds m12 as the cell with the value before blank. then with m12 it needs to determine weather row 11 in the same column has Text either "S" or "F" if "S" then m12 = t if "F" then m12 offset(1,-1) = t. And just to make things more difficult i need the range E12:O12 to step 2 as well until it gets to E208:O208 .Noting that row 11 never changes and will always have either an "S" Or an "F"

and also t = time()

View 7 Replies View Related

Copying Data And Pasting To Visible Cells Only After Apply Filter

Jul 7, 2014

I have productivity data sheet of employees for a month and want to update in a tracker sheet.Every productivity sheet has 5 columns containing numbers.Since its monthly it would be contain 30-31 rows and.I want to copy this data then go to tracker apply filter with respective employee name and paste it there.Is there a way to do this using vba code?

I have prepared vba code to copy paste individual rows from productivity sheet to tracker.But preparing row by row code makes it way too big.Hence i am looking for another solution.

View 3 Replies View Related

Offset Real Time Data Based On Validation List

May 8, 2007

What I have:

I have 12 months in a year and each number represent a month. I have generated lists of data mainly interest and principle payments from 12 amortization sheets which i have just copied into the attached spreadsheet and will change accordingly based on the loan terms which doesn concern us. For our purposes we wont make distintion between principle and payment as i just need to see how to make what i need work.

What I need:
I need to offset data vertically automatically once i the user selects an option value (Number in this Case) from the validation list located within the Payment control box. Going from left to right you see the raw data but in this example i need the data on the right hand side to be offset down the number of rows which may be found in the control box as a validation list.

IE:

So if i were to use "Loan I" [L6] and select a "2"[J6] from the "Payment Control" then the data on the right hand side [L6[ would reflect a $0 but instead the new value for L7 would be "$24.96" and would continue down for about 374 rows. This will have to be done for Loans I - Loans N [L6:Q6] respectively. This is all i need in order to compile and make use of in my spreadsheets.

Thanks and cannot be a formula as forumlas will be overwritten and cannot be a macro so it must be a module in itself so it an run when the list is changed.

the single digit values in coulmns M6:Q3 are there mainly so you can see the difference between the base and the position at which the data is placed at. its not need but is there to stress and to show the number rows in offset of data.

View 9 Replies View Related

Pasting Variable In Filter In VBA Macros?

Sep 30, 2013

I am trying to write a macro where I have to select a name, copy it and search in a Pivot filter if a certain condition is met. I am stuck at a place where I am unable to paste the selected value as a variable.

Code:

For Each cell In .Range("I2:I" & .Range("I" & .Rows.Count).End(xlUp).Row)
If cell.Value = True Then
Range("G" & N).Select
Selection.Copy
Range("A3").Select
ActiveSheet.PivotTables("PivotTable1").PivotFields("QC POC").PivotFilters.Add _
Type:=xlCaptionContains, Value1:="selection.paste"

The portion which is in bold (Value1=) needs to contain my selection (which is actually a name)

View 8 Replies View Related

Offset From Cell Based On Inputed Week Number

May 20, 2008

I want to have a variable range.

ie. This value M4 needs to change based on the week.

Range("M4").Select

If it's week 1, then it can be say M4, but week two will need data to go to N4.

I have found out how to get the week number from the user. ie.

' Select Week Number
Dim NumSheets As Integer
Dim Prompt As String
Dim Caption As String
Dim DefValue As Integer

Prompt = "What week do you want to get data for?"
Caption = "Week Number"
DefValue = 1
NumSheets = Val(InputBox(Prompt, Caption, DefValue))
If NumSheets > 52 Then MsgBox "Week Number too high"
If NumSheets < 1 Then MsgBox "Week Number too low"

I tried then linking this value saved as NumSheets by:

Dim Rng As Range

If NumSheets = 1 Then Rng = Range("D3")
If NumSheets = 2 Then Rng = Range("E3")

View 3 Replies View Related

Autofilter Block Of Data From Active Cells Offset

Jul 16, 2012

Thats the best I could describe that What I face today is the means to run a VBA Autofilter from an Activecell. The Activecell is a search result. I have a table that spans from A1 to E5000. The Activecell will always be in Column A. What I need to happen in when the Activecell is found an Autofilter is placed in the block of data from Column B to E. The rows will change after every search hence my dilemma. Each block of data has its own header as well

So if my Activecell is A2 then I need B1:E4 Autofiltered then Column E sorted Smallest value to Largest. The Activecell needs to remain static. The size of the blocks of data are exactly the same.

Here is a photo example of the desired result. Untitled.jpg

There are hundreds of blocks of data like this.

View 7 Replies View Related

Offset Using Variable Value?

Jun 24, 2013

can i make offset with variable value, i am trying to make a code to Auto filter data then copy it to another sheet.

then take offset of number of rows of previous criteria and copy next set of data

my code is

Sub Test()
Dim rng1 As Range
Dim rng2 As Range
Dim rng3 As Range

[Code].....

When i use this Code it offsets second data paste place to be very far away, like at cell 69 while it should be only at cell 6 or 7 based on L value, is that right, there is another way to do it ?

View 2 Replies View Related

How To Hide Command Button Based On Another Cell

Jan 16, 2010

I have a command button on a worksheet, not in a user form. I know the command button has a property called Visible that I can manually set to False.

I want to set this property to False if the value of the B3 cell is less than 2.000

View 7 Replies View Related

Hide Command Button Based On Another Cell?

Jan 28, 2014

How to hide command button based on another cell?’ [URL] .....

This works faultlessly but for only 1 Button. I tried adding in the code again for a second Button but it creates a conflict. I made a slight adjustment to your original code, to show the button when the cell is populated, which works well…

[Code] .....

Any way I can:-

1. Add additional buttons which reference their own cell?

CommandButton4 – H9
CommandButton6 – I9
CommandButton2 – Q9
CommandButton3 – S9

2. And add one button which activates based on one of 3 cells?

CommandButton1 – J9 &/or V9

View 5 Replies View Related

How To Hide Command Button Based On Another Cell?

Jan 16, 2010

I have a command button on a worksheet, not in a user form. I know the command button has a property called Visible that I can manually set to False.

I want to set this property to False if the value of the B3 cell is less than 2.000

View 2 Replies View Related

Capturing Variable In Offset?

Jun 14, 2014

I am trying to make a program and in this program I am trying to use an offset. In that offset I want the column offset be = to a Integer variable I have created but I am getting the "red text".

How can I capture the weeknumber integer, entered into the input box as the second offset variable?

Dim ForumMember As String
Dim ForumMemberRange As Range
Dim ForumMemberLocal As Range
Dim WeekNumber As Integer
'worksheet and book activation
Workbooks("Trivia Point Account").Activate
Worksheets("Game 3").Activate

[code].....

View 5 Replies View Related

Chart With VBA Based On A Row With Values That Will Color The Offset Cell Interior Red And Also Give It A Value Of 1

Feb 15, 2010

I'm trying to make a simple chart with VBA based on a row with values that will color the offset cell interior red and also give it a value of 1. (look a the example sheet.)

View 4 Replies View Related

Pasting Visible Cell Only After Data Filtered

Nov 16, 2011

I wanna copy and paste the data -- visible cells after I filtered data. How can I do that.

View 2 Replies View Related

Macro: Copy And Pasting Variable Ranges On Seperate Sheets

Nov 4, 2009

I have attached the xls. I have an input sheet with 3 columns to enter data. Each column is linked to a separate worksheet with a formula (Carrys 1000 rows long). I need to be able to pull the populated data from those 3 worksheets and paste into 1 column continuously on another worksheet so all data is on top of another without any spaces.

I made an if statement so that if there isn't data pulling from the input sheet the a blank cell is left to indicate the last row to copy data from and paste on the final sheet.

View 5 Replies View Related

Find, Offset, Paste Variable

Sep 2, 2009

The initial code was from this forum. I modified it so it wont work
The code finds the first instance but none after, why?

View 3 Replies View Related

Using If Function To Pull Data From One Cell Based On Data From Merged Cells

Jul 24, 2014

Looking for a formula to accomplish the following:

I'm trying to populate cell A31 on a worksheet titled "VolumeTotals" with the data in Cell E23 from a worksheet titled "CurrentCustomers" if the merged cells F3-F22 on worksheet "CurrentCustomers" are equal to the word "Contract".

View 6 Replies View Related

SUM IF Command (2 Cells Are Then Sumed To Get A 1 In Another Cell)

Jan 15, 2009

I have 2 rows that can only = 0.5 based on other cells. The 2 cells are then sumed to get a 1 in another cell.
In the cell that sums the 0.5's it should show a value of 1. I need to be able to only sum these cells when they see the value of 1.

Example of this

A1 B1 C1
0.5 0.5 1

A20
=C1:C19

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved