I've recorded this Macro to sort the cells in a column alphabetically if any cells have content.
I would like to use the Macro on the whole workbook however the AB column range varies between the worksheets.
How should I adapt this Macro to sort simply to the END of AB column??
' PWRII Macro
'
'
Cells.Select
[Code]....
I require vba code which will allow me to select a range of variable size.
Starting from cell A2 use :
Range(Selection, Selection.End(xlDown)).Select
However then using the line below may not select the entire range as some columns may be empty
Range(Selection, Selection.End(xlToRight)).Select
I have a range of data starting in C18, C17 is a label (DivsUsed) the number of rows can range from 1 to a few hundred.
I used the code below to name C18 onwards as a named range with the name DivsUsed and then to use this as a RowSource for a ListBox.
Private Sub UserForm_Initialize()
Dim rangeToName As Range
'Sheet2.Range("C18", Range("C65536").End(xlUp)).Name = "DivsUsed" Tried this too
Set rangeToName = Sheet2.Range("C17", Range("C65536").End(xlUp))
rangeToName.CreateNames Top:=True
ListBox2.RowSource = "DivsUsed"
TextBox2.Value = Sheet2.Range("F2").Value 'This works ok
End Sub
Both tries, and anything else I have tried, give the error " Method 'Range' of object _Worksheet failed".
I have an issue regarding use of conditional formatting where the range i wish to format is on variable length.
For example; lets say i want to format F15 downwards depending on there being a value in the cell, how could I do that ?
Lets say I want the cell to turn GREY if number is 0, RED if the number is below 85, GREEN if above 95 and AMBER otherwise.
How could I do that ?
Any how could i ensure it picks all rows in the range where numbers have been added
how can I make this simple macro sum columns that will be of variable length? I would like the sum to appear as the last entry in that column and highlighted.
VB:
Range("H36").Select
Selection.FormulaR1C1 = "=SUM(R[-34]C:R[-1]C)"
Range("J36").Select [code]....
I have the following issue. I have a list of strings. Each string contains certain characters that are exactly the same for all strings, some characters are different making the string longer (in some cases). What I need to do is extract some combination of characters from each string. The strings look like this:
AB & CDE & FG & I mmmm yyyy.HIJK
AB & CDE & FG & II mmmm yyyy.HIJK
The part "AB & CDE & FG & " (incl. spaces) is the same for each string. The next part contains a roman count from I to VII, causing the length of each string to vary. The "mmmm" part contains the current month spelled in full e.g. December. This part differs as well, for each string. The "yyyy" part contains the year in four digits, e.g. 2007. The part after the dot is the same for each string again.
What I need to do:
- is to extract the month and assign it to a new string
- extract the year and assign it to a new string
- extract the roman number, translate it to a normal number (II -> 2) and assign to a string (or integer).
I'm trying to sort by a column with one to four digit numbers, any of which may be followed by a single letter, i.e. 1,2,3 4A,5, 10,11A,75,101A,600,705,1010B,1011A.
I'd like them to sort in the above order. I am only able to have excel 2003 sort all of the numeric cells first, followed by the cells with the alpha character.
My worksheet contains data with the reaction times on a psychological test. Each respondent in the test has 280 rows in my excel sheet.
The 'perfect' length of the row, is from A to M. When an error is made in the test, the length of the row will increase. So the error length can be A to AA.
For me it is important to analyse the error. So I would like to give a perfect row length, the value 1, and an error row length a value 2.
So, in conclusion:
If:
Cell length = A1 - M1? --> Copy A1 B1 C1 (A B Cof that row) to Sheet3, and give D1 in sheet 3 the value 1
Cell length >= A1 - M1? --> Copy A1 B1 C1 (A B C of that row) to Sheet3, and give D1 in sheet 3 the value 2
Is it possible to display a name on a chart that is not the X or Y value?
I've been sent this macro which displays the school name on a chart when the mouse is on the data point - its all well and good but on the graph I am working on, the X and Y value are both values and I want the school name to come up as well.
Private Sub Chart_MouseMove(ByVal Button As Long, ByVal Shift As Long, ByVal x As Long, ByVal y As Long)
'macro that gets chart to show user details of a point on the chart when the mouse is moved over it
Dim ElementID As Long, Arg1 As Long, Arg2 As Long
Dim myX, myY As Variant
With ActiveChart
.GetChartElement x, y, ElementID, Arg1, Arg2
If ElementID = xlSeries Then 'checks to see which part of the chart the mouse is over
I have a worksheet which already has some built in formulas which take the data in columns V and W, and use them to build other coding in column P. The trick is that the coding created in column P will be six times as long as the source data in columns V and W.
I.e., a single row containing "Sample1" and "Sample 2" in columns V and W respectively create the six following rows in column P:
Row 1:
Row 2: TMUnknown
Row 3: tested1
Row 4: Sample1
Row 5: Sample2
Row 6:
I want to be able to select the accurate length of Column P, which should be 6x as long as columns V or W. Any dynamic way to do this? (Since the amount of data pasted into columns V and W will change each time I use this worksheet.) I know how to select set ranges, but not how to adjust them as multiples of the length of another column
I am trying to autofill dynamic ranges that have column variables (d) and row variables (x)... I am having a hard time with the syntax on this
View 9 Replies View RelatedSo I have got an identifier and a corresponding column of values. I need to calculate sum of those corresponding values for each identifier, so if identifier is 1993, I need to have a sum of all the corresponding values. These identifiers repeat, and I do not want to calculate sum for all of them, just the immediate identifiers (i.e. you have 1993, after that you may have 1994 etc etc and then at one point you will have 1993 again, but that "new" 1993 will have a different sum of course). Also, identifiers do not go in sequence sometimes (however, most of the case they do), for example 1993 may jump suddenly to 2004. The trick with all of this is variable "row width" of these identifiers...
222.xlsm
Column M:
##/##/#### | Variable Length Text-####
Example:
01/06/2014 | Daniel Trimble-4048
I need to parse out the different parts of Column M.
In Column R -- "Close Date", I'm successfully using:
=LEFT(M2,FIND(" | ",M2)-1)
...to extract the close date of the donation.
In Column S, I want to list the donor name--which is all of the text after " | ", and before the "-".
I don't need anything after the hyphen, and fortunately in this data, no one's name has a hyphen in it.
The Close Date is working fine for the LEFT and FIND functions, but for the life of me, I can't seem to get MID to work for the variable-length text. The text will always start in the same position -- 14, as the date and delimiter are standardized. And the last 5 characters of the text are not variable in length, so they can be cut out completely.
How do I use MID to extract everything starting at position 14, and stopping 5 characters short of the end of the text?
i just wanna extract the date shown(last data until meet the first comma) in first column to another column.
column 1
abcde, 1234
abcd, 12345
abcdef, 123
column 2
1234
12345
123
I have a SS I would like to reference a cell in a column which changes in
length. In this case, I would like to reference the most current date in a
column.
Is there a simple method for doing this, as the data will routinely be
different lengths in that column.
Further, there is Data on the Horizontal that I would like to reference to
another cell in another sheet that would correspond to this date. Can anyone
give any suggestions as to the best way to accomdate this?
I am trying to do is to build an array from a series of cells that may or may not contain text.
For example cells A1:A6 may be equal to red, orange, yellow, green, blue and purple,
but each cell may also be blank.
So I might also have blank, blank, yellow, blank, blue, purple.
Is there a way I can make an array of just {yellow, blue, purple}? and then the next time it may be {red, blue}
Or can I index only cells that have text?
In the end, I just need a way to make a selection from only those cells that have text.
I'm trying to sort a report using case number in Ascending order, this report varies in length and data begins in cell B2 down the whole report. It needs to include the fields on either side ie. expand the selection.
View 3 Replies View RelatedI am trying to split up a cell into numbers and charachters and place them in
separate columns, but the lenght of the number part varies as does the
content of the character part.
For example, one cell could be 5#, 10Tins, 4 lb, 100Pcs, etc.
I would like to be able to pull out the #, Tins, lb, and Pcs in to their
own column.
I have found this formula:
=LEFT(A1,FIND("-",A1,1)-1)
but it assumes some level of consistency, the "-" in the cell.
My key is in row A (up to 50,000 keys) my entries are in column B. There could be between 1 to 20 entries per key (variable). i need to move the entries across so my key remains in column A and the entries appear in columns B, C, D, etc. Need to end with one row per key.
from this:
823
car
pool
window
345
pen
123
pen
[code].....
If you have used Excel to download data from Bloomberg, you probably noticed that the function "BDH" can return an array of variable length. I was trying to design such a function but could not find a way.
The basic feature of a function like this is that it can be entered like an ordinary formula (not an array formula), but it returns multiple values. The values will be displayed in the range that has the formula as its top left corner.
Hey I got a long String like this "[...] increase of x.xx% [...]".
I am trying to extract only the percentage number which can be of variable length, so maybe 900.99% or 9.99%.
I tried this formula:
=MID(G14,SEARCH("%",G14)-5,5)
but this one doesnt bring the right results as the percentage figure is often not exactly 5 characters long.
Imagine that I have this list of thousands of customers, who are listed in column B in the format "customer no+space+customer name".
Now I want to extract ONLY the customer no from the text string in column B and insert it as number value in column A on the same row.
Would have been easy with "Left" command, but as the customer numbers have variable length, I have a problem.
my macro comes up with an error on the Consolidate line that says 'Cannot add duplicate source reference'. I have a workbook with a variable number of tabs and I want to consolidate-sum (not copy and paste) the data from the various sheets onto a summary sheet within the same workbook. I'm at the point where it all works fine until it hits Consolidate.
Option Explicit
Sub ConsolidateExport()
'
' ConsolidateExport Macro
[Code]....
I am trying to write a macro which will autofill specific columns. The macro will set the range from the start of my autofill to the end of my autofill as a constant range.
The problem I need to get around is the end of my range can always change each time I run the macro. For instance, the first time I run the macro I may only need to autofill from row 4 to row 15. The next time, I may only need to autofill from row 4 to 23 (because of user updates). How can I make the end of my range not be a constant address but variable?
How do I use the value of the last column as a variable within a range like I have similarly used for the last row.
View 2 Replies View RelatedI am trying to set a range for a for next loop using the result of a find, the location of the find result will always be row 1 but may be in any column after Column D. I have been trying different ways to work out this issue but have failed in all my attempts. I would be very grateful to anyone who can tell me where I am going wrong (I am sure it will be very simple).
For Each shtRegisterSheet In ActiveWorkbook. Sheets
shtRegisterSheet.Activate
Set rngFindBalance = shtRegisterSheet.Range("c1:da1").Find(what:="Balance")
dteSaledate = Format(rngFindBalance.Offset(0, -1), "yy")
dteYeardate = Format( Date, "yy")
If dteSaledate < dteYeardate Then ......................
You can have code: For i = 1 to 20, and you then use "i" in the code to represent a number between 1 and 20 as you all know.
I'm wondering can you do something like: For i = A to D, so then "i" in the code would be either A, B, C or D?
I have data (departments) going down column A Starting in Row 4.
Then I have data (months) going across Row two. Both of these will vary in length.
I need to copy a formula from cell C1 and paste it into cells where there is a value in column A and a value in Row 2.
I have a workbook that generates sheets for each year based on selected criteria. It starts at Column H and goes too AH and beyond. When my loop reaches Z it errors out. I think this is happening because the code is referencing the column as ASCII. Here is the
Sub Test()
Dim d As Date
Dim yrint, i, num_years, fields, field_start As Integer
Dim yrstr, crit1, crit2, left_column_range_fixed, right_column_range_fixed, left_column_range_var, right_column_range_var, left_column_range, right_column_range, cost_column, cost_column_var, cost_column_fixed As String
left_column_range_fixed = "H"
right_column_range_fixed = ":AH"
cost_column_fixed = "2"
crit1 = "=x"
crit2 = ">0"
d = Date
yrint = Sheets("Overall"). Range("H2")
field_start = 9 'changed from 9....................
how (if possible) to activate the link between the Excel spreadsheet and the VBA editor, so when I cut/paste row, columns and cells in my spreadsheet, my VBA code is automatically updated.
I have a rather large excel tool combined with a significant amount of VB code, and each time I insert/remove a line, I have to re-type the cell references,