White Space Around Chart

Jul 11, 2007

I'm making five charts on one sheet and there's so much white space. I removed the border, got rid of the plot area, and have tried to send the charts back but there's so much white space. QUESTION: Is there a method to elimite white space on a chart/graph?

View 2 Replies


ADVERTISEMENT

How To Remove White Space In Charts

Jul 19, 2012

How do I remove the white space in charts?

Whenever I draw a pie chart, I see lot of empty space around the pie. When I try reducing the size of the chart, pie also shrinks. I want to be able to reduce the extra white space 'around' the pie in the chart.

View 1 Replies View Related

Determine If Cell Has White Space Only & No Characters

Mar 7, 2008

Using VBA, how can I determine if a cell contains only white spaces and NO valid characters?

View 2 Replies View Related

Printing Full Pages Of Spreadsheets (white Space)

Jan 26, 2013

How you can print cells that have a large amount of text continuously on every page (like in an MS Word document)? I have cells that end up with a lot of text, but excel will push the next text heavy cell to the next page leaving you with a few inches of white space on the previous page. Is there a way to just continue the printing of one cell onto the next page to make all the pages even? It takes up extra paper and looks bad when printed...

View 3 Replies View Related

Textual Report Of Calculations - Remove White Space

Jun 17, 2013

I generate a somewhat textual report of my calculations. Dependent upon the variables, some lines of my generated text end up blank. I need a way to automatically condense the report, eliminating all unnecessary blank lines.

For example:

Line1 Line1
Line2 Line2
blank Line4
Line4 Line7
blank intentional blank
blank Line9
Line7
intentional blank
Line9

Example file attached... actual data, but static. In real file, the data is dynamic, so I included two examples.

View 6 Replies View Related

Remove The Extra White Space Between Each Comma Delimited Digit

Oct 25, 2009

This is a delima I cannot figure out. I had to create passwords for a website we are building. I have 3000 employee numbers has to be used. So what i did was took the first initial and middle initial and last initial and first 5 of the ID number. I did a comma delimiter to obtain all of the letters and numbers. example: ABC12345

My problem is none of the passwords work because when I imported the letters and numbers into the sheet it looks just like the above. However on review I cut and pasted back to notepad and the data looks like this:

"A B C 12345"

So its adding a tab in the password thats thats a problem, How do I remove this extra white space between each comma delimited digit? without having to manually delete it ?

View 3 Replies View Related

Extend Space Of Userform Beyond Its Maximum Space?

Oct 16, 2012

Is there a way to extend the space of my userform beyond its maximum space? I have tried using vertical scroll bars but they were of no use.

View 1 Replies View Related

Locate Text String After First Space And Before Last Space

May 26, 2007

I have been working on different formulas to return the text string between the first and last space and have been unsuccessful. Is this possible?

I have tried several combos or Left and Right, I have been able to get the values after the first space, and the values before the last space, but not between the spaces.

String: Y60
~C CULT NUCLEUS 3X2 SPRING WST BK XL

Desired results: D60
CULT NUCLEUS 3X2 SPRING WST BK

View 9 Replies View Related

Remove All Text Left Of Space And The Space

Feb 10, 2007

I have two words of differing character lengths separated by a space.

How can I remove the first word... essentially, all the charcters to the left of the space AND the space itself?

View 9 Replies View Related

Determine By How Many White

Mar 21, 2006

I have a spreadsheet with Ethnicity (White, African American, hispanic,
Asian, other) in column A and Time (hh:mm:ss) in column B.

I trying to determine by how many White, for example, have spent less than 5
hours, >5 hrs but less than 10 hr, etc.

My plan is to make a chart of the data.
I've been looking at sumproduct and COUNTIF but I can't quite figure it out.

View 10 Replies View Related

COUNTA Not To Counting Space Bar Space

Feb 15, 2009

I have the following formula that works fine until someone uses the space bar to clear a cells contents

=COUNTA($D11:$AI11)

When the space bar is used to clear a cells contents the COUNTA statements includes the space in the count. How do I count the number of cells with content and exclude the space bar space in a cell?

View 4 Replies View Related

Delete Space After Dot In Cell B1 If A1 Contain Dot Without Space

Nov 6, 2012

If find dot. with out space in ( A1 ) cell remove space after dot in cell ( B1 ) Cell, vb or macro

A
B

M V Micunovic
MICUNOVIC,M V

L.T.Kudrjavceva
KUDRJAVCEVA,L. T.

D Sumarac m.l.
M. L,D SUMARAC

View 1 Replies View Related

Remove Only One Space If There Is Space From The End Of Text

Apr 10, 2013

I only want to remove one space at the end of my text within a cell, if there is a space.

Code:
Sub hth()
Dim c As Range

For Each c In Range("H1", Range("H" & Rows.Count).End(xlUp))
c.Value = Trim(c.Value)
Next c
End Sub

View 9 Replies View Related

Delete The 'white' Thing

May 15, 2009

i dont know what that 'white' thing called. After i copied the data from other sources, i cant delete the 'white' thing. even i delete the whole sheet, the 'white' thing is still there.

View 2 Replies View Related

Sumif Cell Colour = White

Jul 29, 2008

this is the code i'm currently using to enter a formula into a cell

View 9 Replies View Related

If Cell In Column A Is White - Delete That Whole Row

Mar 10, 2013

I have a worksheet that contains 3 colors. I sort the worksheet by 2 cell colors, moving them to the top.

I would like code to delete any rows whose cell color in column A is white, leaving only my two other colors.

Can this be done?

View 3 Replies View Related

Delete Clusters That Are Fully White?

Jul 23, 2014

I'm working on a project and am particularly new to the whole excel world (especially with macros). Currently, my boss has some data that needs to be refined and organized. Until I get a sense how to have a macro do everything all at once, I plan on have macros do each step more quickly.

Right now, the macros my boss has given me allows the data to be organized into clusters. Each cluster is separated by client IDs in column C. Each cluster is separated by a blank row. We are looking for clients who have not paid their dues and are marking their unpaid dues with colored rows. The dues that are paid are left as white. However, there are clients who do pay their dues, leaving their entire clusters white. I was wondering if there is a macro to remove those fully white clusters.

View 1 Replies View Related

Code For Gray And White Rows

Dec 29, 2006

I have a spreadsheet where the user wants gray and white lines to occur starting from row 36. Meaning row 36 is grey row 37 white 38 grey etc. to make it look like old accounting paper. The problem is there is a macro that runs to hide the zeros so I cannot preformat the rows because they will change along with the worksheet. Also, the coloring should stop when there is nothing more in the rows, usually around row 100.

View 9 Replies View Related

Macro To Add Data Labels And Font Color White?

Jul 28, 2014

Formatting charts is difficult so I'm trying to find a macro that adds me data labels (in the middle) and color these in white in my active spread sheet as shown in the image.

View image: Example

I was trying recording the macro but it was too many commands, is there a simple way to achieve this?

View 2 Replies View Related

Conditional Formatting (cell To Have White Text If $O19 Produces A #N/A Error)

Nov 6, 2009

I was wondering it were possible to reference an error. I'd like a cell to have white text if $O19 produces a #N/A error. I tried formula

=($O19=#N/A)

and the formula

=($O19="#N/A")

View 2 Replies View Related

Conditional Formatting: Percentages To Have White Font If An Employee Is Deleted From Column A

Jan 25, 2010

The entries are made in Columns A thru C. In Columns F and G I want any value over 100% to have a red background, any value less than 100% to have regular formatting, and I'd want percentages to have white font if an employee is deleted from Column A.

Here's an example of how I have the formatting set up:
Condition 1: Formula is =$E$2="" --->white font
Condition 2: Cell value is >1 ---->red background
Condition 3 Cell value is </= 1 ---->normal format

View 3 Replies View Related

Excel 2010 :: Highlight Groups Of Identical Number Cells In Alternating Grey And White?

Jun 27, 2014

I am looking for a way to highlight groups of identical number cells in alternating grey and white. My goal is to make it clear when there is a repeating set of numbers. Below is an example of what a completed state of this would look like that I created manually. The real form I will be using this code on will have long number which is why I am looking for this added clarification. I am using excel 2010.

1

1

2

3

4

[code].....

View 4 Replies View Related

Correlation Between Colour Brightness And The Auto Change From Black Text To White Text?

Aug 16, 2013

So I have been playing around with the tab colors on my workbook and am trying to figure out the correlation between color brightness and the auto change from black text to white text. I've noticed that if the Green color value is higher, excel is more likely to use the black text. If Blue is high, white. Green takes precedence over Blue and Red is just kind of in its own world.how excel calculates this?

View 2 Replies View Related

Formatting / Display - Field Not Display 0 If It Is Empty On WHITE Sheet

Mar 14, 2013

I have attached the spreadsheet for reference. All other sheets pull information from the WHITE sheet.

I want the columns for unit price, discount and total to be set to two decimal places but I also don't want it to show anything if the field has a 0 value (so if i only have a few items I don't get lots of o's).

To get the field to not display a 0 if it is empty on the WHITE sheet I have been using "0;-0;;@" which I found on the net. If I use this then it negates the two decimal places.

This also includes the WHITE sheet.

View 3 Replies View Related

Paste First Chart Into Second Chart But Maintain Format Of Second Chart?

Jul 12, 2013

How do I paste the first chart into the second chart but maintain the format of the second chart?

View 2 Replies View Related

Excel 2003 :: Daily Stock Chart AND Random Scatter Chart Data

Jan 14, 2014

I need to plot various data on top of stock charts.

This data could be irregular in date: it could be weekly, or simply random.

To plot this data by itself requires a Scatter Chart.

From what I know so far, you CANNOT DO THIS.

However, I suspect this could be done if I build a Stock Chart from scratch using a Scatter Chart.

Error bars can be used to make the tails, however, I don't know how they built the body bar which has the characteristics of a bar (border, and interior.)

But since I don't really need those two characteristics, I just need a wider error bar line that is provided in the chart edit window. I'm guess through a macro, there are wider line widths assignable.

View 5 Replies View Related

Chart Hyperlinks: Attach A Macro So That When The Chart Is Clicked It Returns To Sheet - Home

Feb 24, 2007

I know this has been discussed a number of times, but here is my problem
I have three charts in my workbook. I want to attach a macro so that when the chart is clicked it returns to Sheet - Home. I have using the following:
worksheets("Home").activate. But after I protect each chart and the workbook, and save and exit. When I reload the Workbook it has forgotten the assigned macros and nothing happens.

View 7 Replies View Related

Excel 2010 :: Add Pie Chart Into Data Point Marker On Line Chart

Nov 27, 2011

I am looking for a creative way to display a pie chart within a data point marker of a line chart.

My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2)
these are recorded per day (Date, in Column A)

I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.

I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.

The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)

the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.

I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.

View 1 Replies View Related

Excel 2003 :: Filter Data In Graph / Chart (without Having To Create New Chart)

Dec 29, 2011

I have a spreadsheet created in Excel 2003 (which is what we use at work, unfortunately).

My employees periodically take a test to ensure they have certain items memorized (or are making progress to that end). The spreadsheet rows show all 46 of my employees, and their test scores. The columns are the dates that the tests are administered. I can create a line graph based on the chart data, and interpolate these data with no problems.

The problem is that there are 46 employees! 46 lines on the same graph make for a very cluttered, hard to understand visual. I want to simplify the view by "filtering out" some of the data.

I have an additional column in my spreadsheet for each employee's work area (Area 1, Area 2, etc), and another column with data based on first letter of last name (the values here could be "A-G", "H-M", "N-S" and "T-Z", for example). I figure i could filter my line graph based on these two columns. For example, somehow select just Area 1, and reduce the number of lines on the graph to 16. Or better yet, Choose "Area 2" AND "A-M" and end up with 7 employees (and therefore 7 lines on the graph).

Here's what i have tried:

1) Select the work area column, and use the Filter, which created a drop-down list at the column heading. When i use this drop-down list, i can easily filter the data in the worksheet by Work Area, but this is not reflected in the line graph, which still shows all 46 lines. The problem was that i forgot that i had set the Calculation Options to "Manual". Setting this to "Automatic" (or leaving it on Manual and pressing F9) solved the problem, as the chart now updates when i use the filters. Calculation options are under the "Formula" tab in 2007, or in Tools -> Options -> [either calculation or formula, i forget what it's called] in 2003.

2) Create several separate line graphs in several separate sheets. I wouldn't want to assign someone else the task of maintaining a spreadsheet of such inefficient design.

View 1 Replies View Related

Adding Comparison Line Chart To And Existing Population Pyramid Chart

Jul 14, 2012

I have created a population pyramid and want to add another chart on the secondary axis which I can do. The part which I seem not to be able to complete is getting the line chart secondary axis to read from the primary y axis. It seems to add a new axis, even when I delete this the line chart does not read correctly.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved