Determine If Cell Has White Space Only & No Characters
Mar 7, 2008Using VBA, how can I determine if a cell contains only white spaces and NO valid characters?
View 2 RepliesUsing VBA, how can I determine if a cell contains only white spaces and NO valid characters?
View 2 RepliesI'm making five charts on one sheet and there's so much white space. I removed the border, got rid of the plot area, and have tried to send the charts back but there's so much white space. QUESTION: Is there a method to elimite white space on a chart/graph?
View 2 Replies View RelatedHow do I remove the white space in charts?
Whenever I draw a pie chart, I see lot of empty space around the pie. When I try reducing the size of the chart, pie also shrinks. I want to be able to reduce the extra white space 'around' the pie in the chart.
I have a spreadsheet with Ethnicity (White, African American, hispanic,
Asian, other) in column A and Time (hh:mm:ss) in column B.
I trying to determine by how many White, for example, have spent less than 5
hours, >5 hrs but less than 10 hr, etc.
My plan is to make a chart of the data.
I've been looking at sumproduct and COUNTIF but I can't quite figure it out.
How you can print cells that have a large amount of text continuously on every page (like in an MS Word document)? I have cells that end up with a lot of text, but excel will push the next text heavy cell to the next page leaving you with a few inches of white space on the previous page. Is there a way to just continue the printing of one cell onto the next page to make all the pages even? It takes up extra paper and looks bad when printed...
View 3 Replies View RelatedI generate a somewhat textual report of my calculations. Dependent upon the variables, some lines of my generated text end up blank. I need a way to automatically condense the report, eliminating all unnecessary blank lines.
For example:
Line1 Line1
Line2 Line2
blank Line4
Line4 Line7
blank intentional blank
blank Line9
Line7
intentional blank
Line9
Example file attached... actual data, but static. In real file, the data is dynamic, so I included two examples.
This is a delima I cannot figure out. I had to create passwords for a website we are building. I have 3000 employee numbers has to be used. So what i did was took the first initial and middle initial and last initial and first 5 of the ID number. I did a comma delimiter to obtain all of the letters and numbers. example: ABC12345
My problem is none of the passwords work because when I imported the letters and numbers into the sheet it looks just like the above. However on review I cut and pasted back to notepad and the data looks like this:
"A B C 12345"
So its adding a tab in the password thats thats a problem, How do I remove this extra white space between each comma delimited digit? without having to manually delete it ?
I can do this in Excel, but I don't seem to have a single example to hand of how, using VBA, to extract all characters up to but not including, the first space character in a cell.
View 9 Replies View RelatedAutomatically format a textbox on a userform so that it puts a space immediately before the last 3 characters, regardless of how many characters are put in?
View 9 Replies View RelatedI have following kinds of texts in a column.
MISCELLANEOUS
EQUIPMENT
JBKU348597-3
T-225
75984
I want to convert above texts with space between every character as follows:
M I S C E L L A N E O U S
E Q U I P M E N T
J B K U 3 4 8 5 9 7 - 3
T - 2 2 5
7 5 9 8 4
I am trying to find numbers before a space character.
For example...
In column 1..................to return in column 2
23 cars................................................. 23
5 trucks................................................. 5
150 vans.............................................. 150
I can't use MID Function as it can be 4 numers long...
I am looking a macro which should perform below activities
I have a lists of suppliers which needs to cleansed....
1.replace all the special characters with a space
2.replace Corporation with Corp
Incorporation with Inc
Limited with Ltd
Limited partnership/ltd partnership with LP
Company with Co
ASSC/ASSOC with ASSOCIATION/ASSOCIATES (SEARCH SUPPLIER IN GOOGLE FOR THE CORRECT ONE)
MGNT with MANAGEMENT
SVCS with SERVICES
DEPT with DEPARTMENT
Unltd with UNLIMITED
Ctr with CENTER
UNIV with UNIVERSITY
3. Remove any text, Special characters and numbers after INC,CO, LTD, CORP,LLP, LLC
The macro should when I select any particular column... not restricted to column A
I've a column of data as below:
ROACH (#21)
SHARK (#11)
SHARK (#13)
UNICORN (#26)
ROACH (#20)
TRIGGER (#09)
UNICORN (#06)
UNICORN (#09)
UNICORN (#11)
VIMBA (#03)
VIMBA (#04)
TRIGGER (#06)
ROACH (#07)
ROACH (#08)
ROACH (#10), UNICORN (#24)
What I need to do it to strip off all the characters after the first space.
I assume I can use FIND and then LEFT, but how to I put this into a Macro?
I need to add spaces to a string of characters so that it is readable, the database is huge so I cannot do it manually:
For example,
123456John Doe 3456Adam Sharp I need it to apperar as:
123456 John Doe 3456 Adam Sharp
but still remains at the same column. Is there a quick way to do this ?
I am trying to write a function that finds and breaks a cell about the first space.
Worksheet is:
=LEFT(name,FIND(" ",name)-1)
Have tried...
Function Firstname(name)
Dim Space As Integer
Set Space = .Find(" ", name)
Firstname = Left(name, Space)
End Function
and also...
Function Firstname(name)
firstname = left(name,find(" ",name)-1))
End Function
I want to write a macro that will check every selected cell. It should detect if there is a space after the fourth character. If there is a space, go to the next selected cell. If there is no space, add a space and go to the next selected cell.
View 5 Replies View RelatedI have text string and would like two formulas to find,
1) the characters after the last space and
2)to find the number of characters after the last space.
I have text string and would like two formulas to find, 1) the characters after the last space and 2)to find the number of characters after the last space.
View 9 Replies View RelatedI want to remove the front zero(s) from the front and put a space before the last two letters for the following column of data in Excel:
0001MG
0020MG
0100MG
1000MG
Final result will have this format and the data are right aligned.
1 MG
20 MG
100 MG
1000 MG
The numbers can vary (e.g. 0150MG, 0025MG,etc.) but the arrangement is always the same: four figures for the first 4 characters and two letters for the last two characters.
The format of the cells containing the data is: “General”
My table has 7 columns and these data are in the 5th column in a worksheet called “ProductSummary”. The number of rows for the records can vary from 10 to over a couple of hundred.
How can I use VBA to: 1) automatically select the table range in that worksheet and reformat all the data in the 5th column.
using this format *.#,##0_);*.(#,##0);*.0_);@*. I get this:
Bonds..................................
would like custom format to do this,
Bonds . . . . . . . .
note:@ sign activates text formatting, *=repeats .=character being repeated
I've tried putting space characters before and after the period - no luck
I looked at a couple pages of Ozgrid solutions for people that were having word wrap issues and decided my issue wasnt related to any of them - my cells are not merged and they are not exceeding 1024 characters. I have a sales sheet with column headings as the name of the product, many of which have long names (but all less than 100 characters). For example, one cell value is "Flow Meters And Regulators 2007" and another is "Sphygmomanometers 2007".
My column width pre-format is 8.43 and after format is 7.86
The only code I use to adjust the row and column size is
With Rows("1:2")
.WrapText = True
.AutoFit
End With
Columns.AutoFit
As you can imagine "Sphygmomanometers" breaks into two lines in the short confines of 7.86 width. How can i get the column autofit to adjust to the full word?
I have a worksheet that will have tabs added as time goes by and a macro within the workbook currently selects all of the sheets and copies and pastes formulas within all of the sheets simultaneously. Right now, if a tab is added, the macro needs to be updated to select that specific tab name as well.
I would like to simply have the macro select all of the sheets starting with "IL" until the sheet before "reference", or all sheets except the first 3 and the last 2 if that is easier. Any ideas? And thank you for your help, you people really amaze me sometimes!
this is the code i'm currently using to enter a formula into a cell
View 9 Replies View RelatedI have a worksheet that contains 3 colors. I sort the worksheet by 2 cell colors, moving them to the top.
I would like code to delete any rows whose cell color in column A is white, leaving only my two other colors.
Can this be done?
If find dot. with out space in ( A1 ) cell remove space after dot in cell ( B1 ) Cell, vb or macro
A
B
M V Micunovic
MICUNOVIC,M V
L.T.Kudrjavceva
KUDRJAVCEVA,L. T.
D Sumarac m.l.
M. L,D SUMARAC
I was wondering it were possible to reference an error. I'd like a cell to have white text if $O19 produces a #N/A error. I tried formula
=($O19=#N/A)
and the formula
=($O19="#N/A")
Is there a way to extend the space of my userform beyond its maximum space? I have tried using vertical scroll bars but they were of no use.
View 1 Replies View RelatedI have been working on different formulas to return the text string between the first and last space and have been unsuccessful. Is this possible?
I have tried several combos or Left and Right, I have been able to get the values after the first space, and the values before the last space, but not between the spaces.
String: Y60
~C CULT NUCLEUS 3X2 SPRING WST BK XL
Desired results: D60
CULT NUCLEUS 3X2 SPRING WST BK
I have two words of differing character lengths separated by a space.
How can I remove the first word... essentially, all the charcters to the left of the space AND the space itself?
I have the following formula that works fine until someone uses the space bar to clear a cells contents
=COUNTA($D11:$AI11)
When the space bar is used to clear a cells contents the COUNTA statements includes the space in the count. How do I count the number of cells with content and exclude the space bar space in a cell?