Whole Row Color Change - Conditional Formatting
May 25, 2007
I'm trying to make a tracking sheet of upcoming annual inspections for different pieces of equipment. I've already got a column set up listing the inspection due date. Using three conditional formats, the individual cells change color based on the amount of time until the inspection is due (green normally, yellow at 30 days out, red past due).
What I'd like to do is have the entire row of information change color based on the color of the cell the inpection due date is listed in. For ex. J6 lists the inspection date as 24-Feb-07 and is therefore red, I'd like A6-I6 and K6-P6 to change to red as well. And when the inspection is compleate and I manually change J6 to say 25-May-07, I'd like all of row 6 to change green based on the fact that J6 is already going to.
View 5 Replies
ADVERTISEMENT
Feb 4, 2007
I have one cell (M6) wich will have one of the following values:
Pale Yellow
Yellow
Yellow Orange
Orange
Red Orange
Red
Red Violet
Violet
Blue Violet
Blue
This cell is filled in by a formula.
I would like this cells (M6) color, to change to the approriate color.
View 9 Replies
View Related
Dec 3, 2009
Is it possibe to change another cells color (Fill) based on what is placed in that cell? Example: A1 =if there is an "x" in A2 highlight A1 Green, but I have information in A1 also. Or if I had a different cell say= if there is an X in A1 Highlight A1 Green ect.. This key is to highlight a cell that I have information in based on a different cell having an X in it. If ther eis no X in the cell I have indicated, nothing needs to happen.
View 2 Replies
View Related
Oct 25, 2007
I would like to be able to put a value into a cell. By doing this I would like another cell next to it to turn a color. With that said, is it also possible to format a cell with several possible scenarios in one formula to be able to change the cell next to it a color?? Example is this lets say Cell B1 could have the letters, A B C D or E entered. So that the Cell A1 turns say the color Red.
View 2 Replies
View Related
May 11, 2006
Using conditional formatting I can change the font color (to blue) of a cell if it meets a certain criteria. Now what I would like is to display a message when the color changes to blue. The cell range is E26 to E40.
View 9 Replies
View Related
May 23, 2014
Is it possible to change color for arrows icons in CF- icon sets? I would really like to have a five arrows pointing in different directions (all in different colors).
Can I do it in conditional formatting or should I go for "Wingdings" fonts and then change font color?
View 2 Replies
View Related
Jul 8, 2008
I have a simple sheet that has columns I-K. My issue is that in column K I am dividing J/I. If both J and I cells have a "0" then I get the #DIV0 error. If both J and I cells are blank then I get the #VALUE! error. I need it so that if the cells in J and I have a zero in them then it places a 0 in K. But if both J and I are blank then it puts something else that I can have Conditional formatting change the font color so column K looks blank. I think the IF formulas I am try to use recognize blank cells as zeros as well.
View 9 Replies
View Related
Mar 5, 2007
Cell B157 is changed by checkbox 1= TRUE, 0 = FALSE
Cell H1 and Cell H2 are percentages changed by the user.
Range(AI8:AQ8,AI12:AQ12,AI16:AQ16,AI20:AQ20, etc) each cell in the range contains a formula, and is protected from the user.
I need the contents of each cell in the range to change font color (independent of each other) when the formula of any of the cells within the range changes - to the following
If B157 = 1
Cells < H1 (a percentage changed by user), would turn Red
Cells > H1 but < H2 (a percentage changed by user) would turn Yellow
Cells > H2 would be Green
If B157 = 0
Cells < H1 (a percentage changed by user), would turn Green
Cells > H1 but < H2 (a percentage changed by user) would turn Yellow
Cells > H2 would be Red
I need it to fire whenever the value of one of the cells in the range changes.
I have tried If statements, Select Case, and a combination of both but just can't get it!
View 9 Replies
View Related
Dec 4, 2012
I know how to set a conditional for a cell to change a color when i apply a specific value, but how about if i want to set E2 cell to change to green when i place a 'X' on F2?
Pretty much I want 2 columns that say Yes and the Other No. When i place a X on Yes that other cell turns green, if i place a X on No that other cell turns red.
View 5 Replies
View Related
Jul 19, 2013
I'm trying to get conditional formatting to change the cell color based on a few conditions.
I want the cells in column D to turn red if;
- The number in column B has a match in column A
- And the corresponding cell in column C is not blank
- And the corresponding cell in column D is blank
In the example below, cell D4 should be red
If there's a match (Column B to Column A) and;
- If cell in column C is not blank and cell in column D is not blank, do nothing.
If there's a match (Column B to Column A) and:
- If cell in column C is blank and cell in column D is blank, do nothing.
Here's the formula I attempted but didn't get it to work.
IF(AND(C2"",D2=""),MATCH(B2,$A$2:$A$15,0),IF((AND(C2"",D"")),"",""))
View 3 Replies
View Related
Jun 26, 2013
Via conditional formatting, I am searching to change the color of a specific word in a cell (not the color of everything in the cell, but only that specific word - and the word repeats in the cell). A function such as =isnumber(search("NOK";A1)) colors all the cell values, which I do not want to do. How i can perform this task?
View 1 Replies
View Related
Oct 19, 2006
I have two conditions setup in Options>View - Zero Values.", "style="background: #FFFFFF;padding: 2px;font-size: 10px;width: 550px;"");' onmouseout='GAL_hidepopup();'>formatting.htm" target="_blank">conditional formatting. The first is setup for alternate row coloring with this formula inside Conditional Formatting:
Formula is = MOD(ROW(),2)
My Second Condition is
Cell Value is between $P$10 and $Q$10. This sets the font bold and a different color. The two cell values are two dates. I want to change the cells font color and bolding as long as the value is within that date range. It works fine, but for cells that are on the row that is colored the second condition doesn't apply for some reason.
View 7 Replies
View Related
May 25, 2014
First off I have an excel sheet that I have split into two windows. excel sheet.jpg
I am looking for a formula that will change the bottom sheet number a color if it exists on the top sheet.
View 8 Replies
View Related
Oct 9, 2013
I have two columns. In column B is the date of "last check". I column A is the date of "next check". I would like to have cell A2 in yellow color 334 days after the date entered in cell A3 and than in red color 365 days after the date entered in cell A3. Same thing for cell B2 related to date entered in cell B3. Yellow color in cells announces that check will expire within 30 days and red color that check has been expired.
View 1 Replies
View Related
Apr 8, 2009
I want every even row that has a value in it to have a different fill color (same color for all). how to do it? I am using 2007.
View 5 Replies
View Related
Dec 18, 2013
I have a column of student grades & accumulated credits.
1.) I would like to apply a CF formula which turns the cell GREEN when a score is above 65 else RED below 65.
2.) Also I would like to turn another cell GREEN if a student has accumulated the required # of credits listed in another cell else RED.
View 4 Replies
View Related
Jun 11, 2014
Color Scale Conditional Formatting
I want to use formula to define Minimum, Midpoint and Maximum in the color scale, but am not able to achieve it.
My Criteria are as follows;
Minimum: Less than equals to 50%
Midpoint: More than 50% less than 70%
Maximum: More than 70%
I need this formula for Accuracy column only.
View 3 Replies
View Related
May 28, 2014
We have a spreadsheet that is sent to a manager weekly. The manager takes the sheets from 30+ individuals and copies all into a single workbook that is then distributed to a very large audience and reviewed weekly. In this workbook, I have created drop downs with conditional formatting - Low = Green, Medium = Yellow, Critical = Red. On the original workbook, this formatting works great, however, after the manager consolidates and redistributes all worksheets the Green shows Gray, Yellow is OK and Red shows Black.
View 2 Replies
View Related
May 19, 2009
I am using the following formula on a conditional formatting to color cell A1 based on cell N5 date =$N5=TODAY()-2
The problem is that I need this formula to consider only weekdays, how can apply formula weekdays to my formula?
View 6 Replies
View Related
Aug 11, 2009
When using conditional formatting, I have it set to the following:
C2=60 (Reference Cell)
C3=5 (Reference Cell)
Conditional Format Settings
If C3 >= C2/12 then pattern set to Green
If C3 < C2/12 then pattern set to Red
Here is the problem - when you have a value in C3, everything is fine, it's either green or red. If C3 is blank, it defaults to green because the conditional format is true.
Is there anyway to add something in there to have no color when C3 is not populated?
View 11 Replies
View Related
Dec 11, 2013
I have a column that when I put info in it gives me a colour, now on this I have quit a few different labels, eg. AAG201, PRA001, 000010 and so on, now on my rule I have put in that if it is PRA* ,AAG* to be one colour and 0000* to be a colour. (this is working without a problem).
I have tried to get the rest of the row to be the same colour, but cannot get te rules to work, I do not know which rule to use to get this working.
View 10 Replies
View Related
Jan 19, 2012
I need to assign 3 critera for Red and similarly for Green 3 Criteria ..
For ex: Red:"3yr"≤40%
View 9 Replies
View Related
Aug 13, 2007
Is there any way to count a list that has been highlighted by conditional formatting?
View 9 Replies
View Related
Jul 6, 2009
I'm using Excel 2003.
I have four conditions that dictate font colors in column "d" of "sheet1" and am using the following
Private Sub Font_Change(ByVal Target As Range)
Set Myrange = Range("D2:D1000")
For Each Cell In Myrange
If Cell.Value = "Started" Then
Cell.Interior.ColorIndex = 3
End If
If Cell.Value = "Pending" Then
Cell.Interior.ColorIndex = 4
End If
If Cell.Value = "On-going" Then
Cell.Interior.ColorIndex = 18
End If
If Cell.Value = "Completed" Then
Cell.Interior.ColorIndex = 6
End If
Next
End Sub
1. Does this code look valid?
2. Do I paste the code in a "module" or in a worksheet object? If I add this to a module, how does the code know to reference sheet1?
3. Is there a handy reference guide that shows color codes? If so, where can I get a copy.
View 9 Replies
View Related
Jun 22, 2006
I am trying to write a VBA code to color cells.
In Column I
I need a formula to change the color of the cell based upon the following criteria
In cell I3, if J3>7 change color to teal, if H3<$A$1 color cell red, if J3<7 color cell yellow, if J3="COMPLETE" color cell grey, otherwise do nothing.
View 6 Replies
View Related
Jul 17, 2006
I found in the web-site a great VBA code that replaces the "Conditional Formatting" option in Excel. The problem is that it changes the "fill color" and I also want to change the "font color".
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("C4:C14")) Is Nothing Then
Select Case Target
Case 0
icolor = 2
Case 1
icolor = 4
Case 2
icolor = 39
Case 3
icolor = 45
Case 4
icolor = 37
Case 5
icolor = 15
Case Else
'Whatever
End Select
Target.Interior.ColorIndex = icolor
End If
View 2 Replies
View Related
Feb 14, 2007
suppose I have the numbers 1-25 in a column. I want to color the numbers 1,4,7,10,13,16,19,22,25 green, color 2,5,8,11,...25 orange and color 3,6,9,12...25 red. I can not set up the conditional formatting formulas correctly.
View 2 Replies
View Related
Jun 24, 2008
Currently I have used all 3 conditional formats to colour certain cells.
1) Colour whole row 'green' when 'complete' colum ="Y"
2) Colour todays date column black in the date table to easily define todays activities.
3) By entering start and end dates that contractors are required, I colour these selected dates in blue with a letter 'x' in the calendar area.
This can easily be seen from the sample sheet above. If you can adapt this for yourselves carry on.
I am also using a macro (found in these forums) to automatically change the colour of the contractors tab to certain colours when selected from the drop down selection box (enabling more than just 3 conditional formats)
What I would like to happen though, is that when item 3 above is performed (select a start and end date) the filled blocks, colour the same as the contractor colour, instead of the blue with the 'x'.
View 5 Replies
View Related
Aug 9, 2013
Summary of performance of various products against target is as follows,
Product vs Target
Color Code
Result
CH4OH
Green
1.0
[Code] ........
I need the final result automated as follows,
If 2 green of the 4 products, then final result Gree
If 2 Amber of the 4 products, then final result amber
If 2 Red of the 4 products, final result Red
Is there a way to automate this?
View 8 Replies
View Related
Apr 4, 2007
I have conditional formatting set to paint the cells a certain color if the values are >0 and a diff. color if they are <0. If i enter the value manually everything is fine but if a use a formula to do the calculation there is no formatting.
View 12 Replies
View Related
