Conditional Formatting - Counting Color
Aug 13, 2007Is there any way to count a list that has been highlighted by conditional formatting?
View 9 RepliesIs there any way to count a list that has been highlighted by conditional formatting?
View 9 RepliesI want every even row that has a value in it to have a different fill color (same color for all). how to do it? I am using 2007.
View 5 Replies View RelatedI am looking to count the number of cells in a range c22:v22 that have bold red font, from conditional formatting.
View 9 Replies View RelatedI have a column of student grades & accumulated credits.
1.) I would like to apply a CF formula which turns the cell GREEN when a score is above 65 else RED below 65.
2.) Also I would like to turn another cell GREEN if a student has accumulated the required # of credits listed in another cell else RED.
i have a spreadsheet in excel 2007. It shows a students target grade in one column and their recent test mark in another column. Firstly i have applied conditional formatting to say whether or not the student has hit their target, below or above, using red, yellow and green colours. This all works fine.
Now i would like to add a formula that counts the number of cells that are red, yellow or green etc.....
Color Scale Conditional Formatting
I want to use formula to define Minimum, Midpoint and Maximum in the color scale, but am not able to achieve it.
My Criteria are as follows;
Minimum: Less than equals to 50%
Midpoint: More than 50% less than 70%
Maximum: More than 70%
I need this formula for Accuracy column only.
We have a spreadsheet that is sent to a manager weekly. The manager takes the sheets from 30+ individuals and copies all into a single workbook that is then distributed to a very large audience and reviewed weekly. In this workbook, I have created drop downs with conditional formatting - Low = Green, Medium = Yellow, Critical = Red. On the original workbook, this formatting works great, however, after the manager consolidates and redistributes all worksheets the Green shows Gray, Yellow is OK and Red shows Black.
View 2 Replies View RelatedI am using the following formula on a conditional formatting to color cell A1 based on cell N5 date =$N5=TODAY()-2
The problem is that I need this formula to consider only weekdays, how can apply formula weekdays to my formula?
When using conditional formatting, I have it set to the following:
C2=60 (Reference Cell)
C3=5 (Reference Cell)
Conditional Format Settings
If C3 >= C2/12 then pattern set to Green
If C3 < C2/12 then pattern set to Red
Here is the problem - when you have a value in C3, everything is fine, it's either green or red. If C3 is blank, it defaults to green because the conditional format is true.
Is there anyway to add something in there to have no color when C3 is not populated?
I have a column that when I put info in it gives me a colour, now on this I have quit a few different labels, eg. AAG201, PRA001, 000010 and so on, now on my rule I have put in that if it is PRA* ,AAG* to be one colour and 0000* to be a colour. (this is working without a problem).
I have tried to get the rest of the row to be the same colour, but cannot get te rules to work, I do not know which rule to use to get this working.
I need to assign 3 critera for Red and similarly for Green 3 Criteria ..
For ex: Red:"3yr"≤40%
I'm using Excel 2003.
I have four conditions that dictate font colors in column "d" of "sheet1" and am using the following
Private Sub Font_Change(ByVal Target As Range)
Set Myrange = Range("D2:D1000")
For Each Cell In Myrange
If Cell.Value = "Started" Then
Cell.Interior.ColorIndex = 3
End If
If Cell.Value = "Pending" Then
Cell.Interior.ColorIndex = 4
End If
If Cell.Value = "On-going" Then
Cell.Interior.ColorIndex = 18
End If
If Cell.Value = "Completed" Then
Cell.Interior.ColorIndex = 6
End If
Next
End Sub
1. Does this code look valid?
2. Do I paste the code in a "module" or in a worksheet object? If I add this to a module, how does the code know to reference sheet1?
3. Is there a handy reference guide that shows color codes? If so, where can I get a copy.
I am trying to write a VBA code to color cells.
In Column I
I need a formula to change the color of the cell based upon the following criteria
In cell I3, if J3>7 change color to teal, if H3<$A$1 color cell red, if J3<7 color cell yellow, if J3="COMPLETE" color cell grey, otherwise do nothing.
I found in the web-site a great VBA code that replaces the "Conditional Formatting" option in Excel. The problem is that it changes the "fill color" and I also want to change the "font color".
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("C4:C14")) Is Nothing Then
Select Case Target
Case 0
icolor = 2
Case 1
icolor = 4
Case 2
icolor = 39
Case 3
icolor = 45
Case 4
icolor = 37
Case 5
icolor = 15
Case Else
'Whatever
End Select
Target.Interior.ColorIndex = icolor
End If
suppose I have the numbers 1-25 in a column. I want to color the numbers 1,4,7,10,13,16,19,22,25 green, color 2,5,8,11,...25 orange and color 3,6,9,12...25 red. I can not set up the conditional formatting formulas correctly.
View 2 Replies View RelatedI'm trying to make a tracking sheet of upcoming annual inspections for different pieces of equipment. I've already got a column set up listing the inspection due date. Using three conditional formats, the individual cells change color based on the amount of time until the inspection is due (green normally, yellow at 30 days out, red past due).
What I'd like to do is have the entire row of information change color based on the color of the cell the inpection due date is listed in. For ex. J6 lists the inspection date as 24-Feb-07 and is therefore red, I'd like A6-I6 and K6-P6 to change to red as well. And when the inspection is compleate and I manually change J6 to say 25-May-07, I'd like all of row 6 to change green based on the fact that J6 is already going to.
Currently I have used all 3 conditional formats to colour certain cells.
1) Colour whole row 'green' when 'complete' colum ="Y"
2) Colour todays date column black in the date table to easily define todays activities.
3) By entering start and end dates that contractors are required, I colour these selected dates in blue with a letter 'x' in the calendar area.
This can easily be seen from the sample sheet above. If you can adapt this for yourselves carry on.
I am also using a macro (found in these forums) to automatically change the colour of the contractors tab to certain colours when selected from the drop down selection box (enabling more than just 3 conditional formats)
What I would like to happen though, is that when item 3 above is performed (select a start and end date) the filled blocks, colour the same as the contractor colour, instead of the blue with the 'x'.
How to sort out a way to count cells whose fill colors have been set via conditional formatting.
I'm sure that I was once able to use Chip Pearson's CountOfCF function back in the days of Excel 2003, as it worked around the 3 condition limit and used .ColorIndex which assumed that you'd only ever be formatting using the .ColorIndex values of 1 to 56, but I can't seem to be able to get it to work in 2010.
Summary of performance of various products against target is as follows,
Product vs Target
Color Code
Result
CH4OH
Green
1.0
[Code] ........
I need the final result automated as follows,
If 2 green of the 4 products, then final result Gree
If 2 Amber of the 4 products, then final result amber
If 2 Red of the 4 products, final result Red
Is there a way to automate this?
I have one cell (M6) wich will have one of the following values:
Pale Yellow
Yellow
Yellow Orange
Orange
Red Orange
Red
Red Violet
Violet
Blue Violet
Blue
This cell is filled in by a formula.
I would like this cells (M6) color, to change to the approriate color.
I have conditional formatting set to paint the cells a certain color if the values are >0 and a diff. color if they are <0. If i enter the value manually everything is fine but if a use a formula to do the calculation there is no formatting.
View 12 Replies View RelatedIs it possibe to change another cells color (Fill) based on what is placed in that cell? Example: A1 =if there is an "x" in A2 highlight A1 Green, but I have information in A1 also. Or if I had a different cell say= if there is an X in A1 Highlight A1 Green ect.. This key is to highlight a cell that I have information in based on a different cell having an X in it. If ther eis no X in the cell I have indicated, nothing needs to happen.
View 2 Replies View Relatedformula I colored only if three numbers in a list.
attach file
formattazione.xlsx
Is there a way in conditional formatting to have a cell shaded a certain color based on the value of another cell in that same worksheet?
View 10 Replies View RelatedIn the attached spreadsheet, I have a limit value which is used to set the color of other cells based on their values.
So if the value is greater than limit, the color is red.
When I change the limit, I do see the changes in color.
However, I also want to show only the red values.
I have this SS that uses conditional formatting to color days in a calendar, dates are entered in columns B & C when the dates are entered then the days of the month highlight. Everything works great but I can not get the conditional formatting to work in column E. Column E would be January 1. If I enter Jan 1 in column B & Jan 30 in column C all the days highlight except Jan 1? I have uploaded the SS.
View 3 Replies View RelatedI would like to be able to put a value into a cell. By doing this I would like another cell next to it to turn a color. With that said, is it also possible to format a cell with several possible scenarios in one formula to be able to change the cell next to it a color?? Example is this lets say Cell B1 could have the letters, A B C D or E entered. So that the Cell A1 turns say the color Red.
View 2 Replies View RelatedI have a workbook with 4 sheets. Each sheet is set up the same. There are 4 columns. The column headings are Title, Item #, 2009 Retail Price, and Price changed from 2008 (in A, B, C and D respectfully).
I need to find all red text in column C and place a 'Y' in column D. If the text in column C is not red I want a 'N' in column D.
How do I create 3 color conditional formatting formulas for the following rules?:
if today is 15 days or greater before the day in the cell then green
if today is between 14 and 7 days before the day in the cell then yellow
if today is within 6 days to zero days before the day in the cell then results
anything is clear
x8:x21
5/10/2012
5/14/2012
5/21/2012
6/11/2012
6/12/2012
6/12/2012
6/12/2012
6/20/2012
6/22/2012
6/23/2012
7/4/2012
7/5/2012
7/8/2012
7/12/2012
I have three columns that contain data.
Column A, Column B, and Column C.
Now if data for a certain column is invalid, it will contain text as follows: "N/A". I want to color code the variation existing for the the three columns.
For example:
If on row 3, 3A contains data, 3B contains data, but 3C contains N/A, i want the color of all three cells to be blue (not text color but fill color).
If on row 4, 4A contains N/A, 4B contains N/A, and 4C contains data, I want the color of all three cells to be yellow.
and the rest of the variations as well (5A contains Data, 5B contains N/A, and 5C contains data then all three green etc... etc..)
Of course logically the condition is strictly related to the N/A, and the rest of the data can contain text and numbers if it is not N/A.
Can the color coding be placed in RGB format as well? or can I create a cell with the fill color desired as a reference (in other words a legend that I can refer to when color coding the sheet)?