Width Of Data Validation List Box Returning VB Errors
Dec 9, 2013
[URL]
If I go any of the cells in that column, the VBA code page opens up and I get the following message:
Compile Error:
Ambigous name detected: Worksheet _SelectionChange
and the following vb code is hightlighted:
Private Sub Worksheet_SelectionChange(ByVal Target As Range
The code I have used is:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
If Target.Column = 13 Then
Target.Columns.ColumnWidth = 40
Else
Columns(13).ColumnWidth = 20
End If
End Sub
I having been looking at ways of increasing the width of a data validation list (drop-down) to accommodate items longer than the width of the target column. I found a solution here http://puremis.net/excel/code/068.shtml
The demonstration seems to do exactly what I require. However the code supplied does not work for some reason. I have run the code in debug to see what it is doing and the code runs until it gets to the line
Set objDic = CreateObject("Scripting.Dictionary")
from here it just jumps to the end of the procedure. Mousing over objDic says ObjDic = Nothing.
I am getting a bit out of my depth here - anyone know why objDic is not being assigned a value and the procedure bombing out from here.
I have not found a way to control the width of a validation drop down menu. I have 3 drop down list. Two of them are in wide column cells and one a narrow column cell. For some reason my narrow column cell gives me a wide pull down even though the length of the data in this field is only 3 to four characters.
troubleshooting dependent validation list formula. I found the Ozgrid instructions for the Dependent Validation Lists to be verfy informative and I downloaded the "MatchingLists.xls" to use as a starting point.
My challenge is this: The MatchingLists.xls example does not take into account that there may be MULTIPLE dependent lists that have spaces, numbers and other unique characters in the list's source celles. Therefore, I have decided to reference a NameLookup (named range) that has an abbrevieated name for each each item (without numbers & spaces) I am nesting VLOOKUP within the INDIRECT formula to achieve the results I need - but for some reason it fails occasionally and I do not know how to troubleshoot!
Data Validation Source =INDIRECT(VLOOKUP(SUBSTITUTE(E5," ","_"),NameLookup,2,0))
Excel's Data Validation simply returns the message "The source currently evaluates to an error". This is frustrating becuase it is not consistent. It works with some lists and not with others. How do I troubleshoot???
My worksheet is attached for your reference. The source data for the dependent lists is on the Lists sheet. The dependent drop-downs are in columns E-H on the drop-down sheet. The formula that I am having trouble with is in "Subcategory" (column F). For some reason, I cannot choose category "26_Heat_Exchangers" to populate the subcategories. There are a few other categories that this formula breaks on and I don't know why. Please tell me this is not some crazy limitation with Named Ranges.
I have a formula in my worksheet that is copied into 7 other columns and then copied to the bottom of the worksheet. This spans about 10000 rows.
The formula is this: =IF(AC9="G",AG9,#N/A) When I import my data into the worksheet, either the formula will result in a number or will show blank with an error comment. I need to search through this range and then delete the contents of the cell (including the formula) if it is blank. For reference, the range of the columns are AJ thru AP. I hope this is specific enough, if not please let me know. I can attach the file if necessary.
If #N/A is not sufficient, then I can replace it with "x". This way if the formula does not result in a number then it will place an x in the cell. The macro would then search thru the range and delete any cell containing x.....
I would like to know if it is possible to have in a single cell the information about the presence of an error in the List1, because a cell of List1 got a value that is not in List2.
I mean all cells in List1 have to contains the same values of List2. It is like a data validation. But it would be nice to have a single cell with "There is an error in your range".
I have a list generator that creates a set of data in a multi-column & row dataset. I would like a formula to create a list of the alpha data points only which excludes blanks and any errors.
I have 2 columns First Name & Surname. What I want to do is create a data validation list on the surname which results in the 2nd data validation list only showing the first names which link to one of the surnames.
i.e. If I selected Smith in the 1st validation list then I would only like to see 'Paul' as an option in the 2nd list
I'm trying to use data validation to restrict the user to only selecting values in a list which I create. Right now, the list is a named range. I'd like to get rid of the range and just use a named list. I create a name using the following as my list.
Insert > Name > Create Name: Fruit
Refers to: banana,apple,orange
When I try to use the name Fruit in my data validation, I get the message "The List Source must be a delimited list, or a reference to single row or column." I thought my name "fruit" was a delimited list.
I'm looking for a way to get a unique list from a column to a data validation drop down list. Any fancy formula or vba script to create a UDF which. Does this?
I have a List of Different Fruits in Cells A1 to A5
Apple Banana Orange Strawberry Cherry
And I use data validation list in 5 different cells from Cells C1 to C5 then in every cell the list will show all the fruits,
But I want that if I select Any Fruit in cell C1 that should not be included in the remaining 4 cells, and the fruits selected in Cells C1 and Cell C2 should not be included in the remaining 3 cells and so on....
I Used the formula
=IF(C1=A1,OFFSET(A2,,,COUNTA($A$2:$A$5),1),0)
But this works fine if I select Apple in the Cell C1, then the List of C2 Shows all Fruits other than Apple, But if in Cell C1 I select any fruit other than Apple it does not work... (Using Excel2007 & Win XP)
Is there any function in Excel that returns all values from a list above or below a certain percentage rank/percentile?
For instance, if you want the average of the 2% highest numbers in a list? Or the sum of the 25% most expensive items in a shopping catalogue?
It has to be a "dynamic" function, where you can just drop in a set of figures, sort the list, add a percentile, and perform a calculation on all the figures from the cutoff point signalled by the percentile...
is there a way to force so that a cell value can be only of what a validation droplist offers, hence users can not enter their own values and have to use the droplist for cell content selection.
I am using Data Validation on some fields to create a drop down list from a named range! These fields however allow you to enter values that are not in the list.
Is there a way to make the cell have to be an entry from the data validation list?
I'd like to create a drop down list in data validation from a column of data that contains numerous duplicates.
For example, let's say column A contained hundreds of transactions with either North, South, East and West, how could I create a drop down list in another cell that only had four selection options?
The idea is to create a liquor order sheet which takes items and prices from a liquor inventory workbook, which is part of the same file. i'm sure that you can do it all fancy with a macro, but unfortunately i'm not super experienced with excel. so i helped myself with what i know a bit -> drop down lists. I created an extra sheet which has 4 ranges on there... the liquor type (liquor, beer, wine), and the 3 sub classes for each type (red/white/blush/sparkling for wine, draft/import for beer and so on and so forth). On the inventory i named the range of all white wines "white", of all red wines "red" ..
On my order sheet i created a drop down list for type and created 2 more via "indirect" .. so when you select "wine" in the first one, the 2nd one will ask you for white/red/blush/sparkling and the last drop down then for the exact item according to the range on the inventory.
Hope what i did so far is understandable ^.^
Now my problem is that i want the unit cost to be copied when an item is selected. So you select "beer" in A1, "import" in A2, "corona" in A3... and the price for corona (which is written in a cell on the inventory sheet) should show up in A4.
I attached a screen of the inventory sheet so that you can see how it is structured.
Hello, could some one please help me with the following:
I have created a drop-down list for the range : C3:C65000 using Excel 2003 and Windows XP Pro. I did this using Excel's Data Validation Tool. The settings I used are as follows:
Allow: List Source: =GROUPS Check Box Ignore Blank is Ticked Check Box In-cell dropdown is Ticked
GROUPS = GROUPS!$A$2:$A$29
Now all this works well, such that when I click in the cell range : C3:C65000, then a dropdown list appears - showing a list of all my groups.
However, when I click on any of the dropdown lists in this range, the width of the dropdown list is only as wide as the column. Column C has a width of 20.
What I need please is for the dropdown list to be as wide as the list of information showing in the dropdown list. If some one could please explain on how I can achieve this - that would be great.
I have a workbook that uses data validation from a list. The same list is used in several of the individual sheets. Can one use just one list for different sheets, as I'm having to create separate list for each sheet, which when an overall change needs to be made it is easy to miss one.
I want to load the actual data exist in the rows by selection value from the data validation list.
E.g I have two worksheet in one excel file. One has a data activities of persons with their name like two columns i have in which one exist the name of person and second exist the activities which they perform.
On the second sheet, i made a data validation list of all the person names
Now my requirement is, when i select a person name from the list, load all the data from the 1st sheet to second sheet. Is this possible without VB code, because I want to share it on the Google sheet with my boss, where VB sheet is not supposed to work.
I have a cell "project titles" entered in sheet1 that populates into sheet 2 - column "Project titles".
I need to keep the values in this column unique. So can I create a data validation such a way that I won't be able to enter values into this cell that are already on the list. This way I can avoid entering duplicates.
I try to find a solution (with or without macro) to assign different ranges named "Failure_C..." in a data validation source depending on the value of another data validation list (32 values called)
I started in the Data Validation List Source to fill in IF function but 32 inputs are not accepted and too much caracters in the source.
2. sheet contains the availability of teachers. so all columns start with a date and the rows contain the name.
A row therefore looks like this.
7/1 Harley
Lidia Livia Thais Salete Carla
My issue: The 1.sheet has a column Teacher, now in this column I want to have a drop down list. (E2, E3, E4, E5 ... etc..) This list is depended on the date which is in column B.
Essentially I want the list to look up date in its row go to the second sheet and give me all the possible names in it. That is all.
I am trying to create a data validation list with a bar graph. I have tried using the IF and Vlookup formula, but its not working for me. I would like to be able to select classroom # from the drop down menu and the bar graph update selected with student’s name and selected data information. I have attached the file.
I am trying to set the below table up as a validation list. I am having issues with putting it in as list as it creates a new line every time a “,” (comma) occurs. I know I can use the custom and pull the list from a table, but I can’t use this option (the reason I can’t use the table, if interested, is because the single sheet with the validation contains about ~35,000 line items that are being split up into ~200 different sheets. Each sheet is then sent as a separate email…the problem with using the table is that it would on a different spreadsheet to begin with. The email only sends one sheet. As such, it would no longer be able to reference the table).
A - Less than $25,000 B - Between $25,000 and $49,999 C - Between $50,000 and $99,999 D - Between $100,000 and $249,999 E - Between $250,000 and $499,999 F - Between $500,000 and $999,999 G - Over $1,000,000
Workbook1 contains validated list which is defined by a Range name and also its data is pulled from workbook2. I am unable to change the value of the validated list from drop down when i close workbook2, infact the validation drop down list do not drop at all so that can select values from it. But if i open the workbook2 i am able to change the values of the validation list.
I want the dropdown list to be active when i close the second workbook.
Can I have a cell rage.. say A2:E20...and every cell in it has a drop down data validation list, from data inputted into L2:L27 (For examples lets say L2 is A, L3 is B, L4 is C, L5 is D and so on).
if somewhere in the range A2:E20, say B6 I was to select D from the drop down list, I want the remainder of the cells in range A2:E20, to have the drop down list without the value D in it, and so on, so the more cells in the range I fill from the list, the list for empty cells gets smaller and smaller until there are none left.
i created a drop down list from data validation and it's a list of names. as i select from the list of names, i just want the initials of the names to be shown, not the entire name itself.
cnf_gif.gif cnf.gif
based on this example, what i want is to select from the list of names and only the initials are shown!
i believe its something related to custom number formats...
