Restricting Width Of Data Validation Drop Down List?

Jun 5, 2006

I have not found a way to control the width of a validation drop down menu. I have 3 drop down list. Two of them are in wide column cells and one a narrow column cell. For some reason my narrow column cell gives me a wide pull down even though the length of the data in this field is only 3 to four characters.

View 2 Replies


ADVERTISEMENT

Increase Width Of Data Validation List

Sep 17, 2007

I having been looking at ways of increasing the width of a data validation list (drop-down) to accommodate items longer than the width of the target column. I found a solution here http://puremis.net/excel/code/068.shtml

The demonstration seems to do exactly what I require. However the code supplied does not work for some reason. I have run the code in debug to see what it is doing and the code runs until it gets to the line

Set objDic = CreateObject("Scripting.Dictionary")

from here it just jumps to the end of the procedure. Mousing over objDic says ObjDic = Nothing.

I am getting a bit out of my depth here - anyone know why objDic is not being assigned a value and the procedure bombing out from here.

View 6 Replies View Related

Width Of Data Validation List Box Returning VB Errors

Dec 9, 2013

[URL]

If I go any of the cells in that column, the VBA code page opens up and I get the following message:

Compile Error:
Ambigous name detected: Worksheet _SelectionChange

and the following vb code is hightlighted:

Private Sub Worksheet_SelectionChange(ByVal Target As Range

The code I have used is:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
If Target.Column = 13 Then
Target.Columns.ColumnWidth = 40
Else
Columns(13).ColumnWidth = 20
End If
End Sub

View 2 Replies View Related

Data Validation Drop List?

Oct 10, 2013

I was wondering if there is a way to see all the choices on a drop list. Currently the drop list only shows 8 choices but I am wanting to see all 32 choices eliminating the need to scroll the list. I have attached a picture.

View 4 Replies View Related

Disapearance Of Data Validation Drop-down List

Dec 11, 2006

for some reason my data validation drop down lists have dissapeared. The relevent cells indicate that the data validation has been set-up, but the drop down list is not available for some reason.

View 9 Replies View Related

Data Validation Drop Down List Find

May 3, 2006

data validation drop down list find

i have a data validation drop list of week starting dates. the list works great, but
i have to scroll through more and more as the year goes on...

?can we have a letter sensitive find (as in an access combobox)...?

View 6 Replies View Related

Data Validation Drop Down List Font Size?

Nov 21, 2006

I have noticed that all the cell dropdown lists i have (created by using Data | Validation | Allow | List) are very difficult to read its as though the font is size 8 or 6 or even less, is there a way of displaying the dropdown contents in a larger format? i have tried changing the font size of the named range and of the cell holding the dropdown but to no avail.

View 4 Replies View Related

Data Validation Drop Down List No Arrow Displaying

Jan 7, 2008

I have a workbook with 7 sheets, the drop down list operates correctly on all but one sheet, it used to work on all sheets. The arrow on the right of the selected cell dose not appear onthis particulr sheet. I have rebooted the PC and double checked the in-cell option. I have search the forum for similar problem and found the same problem but no remedy.

View 2 Replies View Related

Updating Cells Based On Selection From Drop Down List Data Validation

Dec 13, 2009

I'm using Excel 2007. I would like to seek some advise on how i may update cells after selecting a month from a drop down list.

i have created a simplified version of what i intend to have. One the 1st tab 'Cash Budget 2009', i have filled up a table with numbers, sorted by months. On the 2nd tab 'Dec09', i would like to create an expense table, to be able to be selected by month. So i have created a drop down list based on the months that are created in the 1st tab.

Upon selection of the month from the drop down list, i would like the cells to display (fetch) the data from the 1st worksheet. It would also be helpful if the name of the 2nd tab can be updated to read as the month that is being selected.

View 4 Replies View Related

Created Validation Drop-down List - Can I Make The Row Now Change To The Colour That Relates To The Selection From The List

Jan 13, 2009

I am trying to create a fairly simple spreadsheet with about 8 columns and about 400 rows. One of the columns features a drop-down list with about 8 or 9 different options. Dependant on which option is selected, i would like the entire row to change colour with that option.

For example:
FAILED - whole row changes red
SUCCESSFUL - row has no fill
Tested - row changes to orange

etc.

Is this possible within Excel 2003?

View 9 Replies View Related

Colors In Validation List Drop Down

Jan 5, 2007

Can we have colors to choose from,in the validation list drop down? Instead of values of text I want colors to choose from the drop down list. Once I click on the small arrow, I should have the color shades to choose from the drop down list.

View 9 Replies View Related

Filtering In A Drop Down (Validation) List

Jun 1, 2006

I have a list of cells i want to select my information from and in addtion i want to select the list all except one value in a box:

eg......

Value in Box: C

List of Values:

A
B
C
D
E
F
G

Therfore i want in a validation list all the values (A - G) except the value represented in the box, hence (C).

View 9 Replies View Related

Add New Entries To Drop-Down/Validation List

Sep 2, 2006

I'm trying to make a sheet that will allow users to either pick from a drop down box, or if the choice they want isn't there, to input data in the same cell. That part I have got. What I can't do is figure out how to have excel add that user input to the list of options, so that they next time the drop down box is used, that "user input" will appear as an option in the drop down. I used data validation to do all these drop downs.

View 2 Replies View Related

Change Event With Drop Down Validation List

Oct 1, 2009

I have 13 sheets in my workbook (one for each month plus a GlobalSettings). In each month sheet I want to create a change event that prompts a UserForm when they select "Yes" from a drop-down validation list if it happens to be a month prior to the current month.

This is the code for the change event:

View 6 Replies View Related

Data Validation, Drop-down Box

Oct 6, 2008

I want to do couple of things here.
1. put an empty field in a drop down box. If possible the empty field should be at the top from the drop down menu.
2. Update names in drop down box when I add names to the list

View 8 Replies View Related

Data Validation Drop Down

Jan 30, 2010

I have a range in a worksheet named "Product3" that has data down to row 30 that is linked to drop down boxes on another sheet. I want to add data to rows 31-40 to also show up in the drop downs. How do I extend that range?

View 9 Replies View Related

Data Validation - Characters In Drop Down

Nov 17, 2008

I have a list for the user to enter in creditor name, balance, monthly payment and interest rate. In the credior name portion, I have used a Data Validation List (drop down menu of bank names) for the user to choose from.

Later on... The user types in the customers ACTUAL bank acount that they will be making payments from.

If the user types in a bank that is the same as one from the drop down list earlier on, I would like a dialog box to come up with further instructions.

View 6 Replies View Related

Data Validation Drop Down Query

Jan 12, 2010

Would anyone know if it is possible to extend the size of the list presented when using the data validation drop down? At present, it seems to default to 8 choices (even though there is a scroll bar) but I was wondering could the list Automatically display, say 20 choices?

View 3 Replies View Related

Data Validation For Drop Down Menu?

Apr 22, 2009

I am doing an internship in Germany, and I have this crazy project with Excel. I am not very familiar with all the equations.

I want to select a company name and a type of container from a drop down menu, and have the information show up on a different sheet assigned for that specific company for the right size container. It involves quantities.

I will attach what I have sofar.

Ladungstraeger(1).xlsx

Ladungstraeger(2).xls

View 6 Replies View Related

Data Validation Drop Down Arrow

Jun 7, 2007

I am currently working on a spread sheet that has a lot of data validation drop down lists. They were all working fine but now none of the drop down arrows are showing up.

View 3 Replies View Related

Data Validation Drop Down Not Showing

Jul 24, 2007

The drop down validation feature on my sheet isn't working. I have treble checked that the boxes for data validation have been correctly done. In another sheet the same data validation feature is working? Can anyone suggest a reason for this?

If you are stumped I can post a snippet of the offending sheet.

View 9 Replies View Related

Data Validation Allow Text Drop And Check?

Feb 5, 2014

i need some formula to data validation with this criteria :

allow only text "DROP" and "check" ...

View 6 Replies View Related

Conditional Data Validation Drop-down Lists

Oct 27, 2008

Sheet1 is my database and looks like the following:

HTML ABCDEFGHIJK
1RefNoSetSubsetStatus
2101lambsheepINP
3102catpetCOM
4103chickenbirdINP
5104milkcowINP
6105turkeybirdINP
7106honeybeeCAN
8107dogpetINP
9108boybabyINP

Sheet2 is for the user input, in which Columns H and I would have a data validation drop-down list and looks like the following: ...

View 14 Replies View Related

Data Validation: Restrict Drop-down Selection

Sep 4, 2009

I have two fields that do the same thing [preset selection vs custom entry], and I need to restrict one from holding any data if the other already does. One field is a drop-down menu, and the other is a decimal entry. It was easy to restrict the decimal from being entered if a drop-down selection has already been made - Data Validation prevents any entry unless the drop-down cell is blank. It's not so easy to restrict the drop-down, however, as it already uses List-type Data Validation to allow only values from a specified range.

Does anyone have any ideas for allowing the drop-down to function as normal if a specific other field or range is blank, but not allowing a selection to be made if that specific field or range already has data in it? I've attached a simplified example worksheet.

View 5 Replies View Related

Data Validation / Drop Menu With Hyperlinks?

Sep 20, 2007

I need to put together a report for work.

What I want to do is this:

Create a drop menu. The options within the drop menu to be links (either to another Excel worksheet within the same workbook, or a WORD document).

I know how to create a drop menu, that is simple, but am not sure how to do the hyperlink aspect.

It seems when I actually insert>hyperlink onto the actual text of the drop menu (on the other sheet where i created the drop menu data), the hyperlink is not active in the actual drop menu itself.

View 2 Replies View Related

Drop Down List Which Returns Values Based On What Has Been Selected In The Previous Drop Down List In The Adjacent Cell

Mar 19, 2009

I'm trying to create a drop down list which returns values based on what has been selected in the previous drop down list in the adjacent cell, e.g. if 'Apples' is selected in the previous cell then you should only be able to select from 'Gala, Granny Smith', or if 'Oranges' is selected you should only be able to select 'Seville, Blood Orange'. Is there a formula which would do this, or can I use a pivot table somehow? I'm totally stumped.

View 2 Replies View Related

Data Validation; Get All The Data Row Wise For The Name Selected In The Drop Down

Jul 27, 2009

I have a excel sheet with values correcponsing few names. I have a list for a Data Validation drop down. How to get all the data row wise for the name selected in the drop down.

View 3 Replies View Related

Build A Spreadsheet Containing Data Validation (drop-downs)?

Aug 12, 2014

I am trying to build a spreadsheet containing data validation (drop-downs). So far, so good.

My goal:

* I want to have various cells show dropdowns based on the value of a cell (per row) which itself can be changed by the user using a drop down.

* I want to have the same various cells show dropdowns that are also based on the value of a cell which has a fixed value per column (in other words, a header).

I have tried a lot of different approaches, including using the INDIRECT function, named ranges, dynamic ranges using a table, INDEX and MATCH. All have failed.

The main issues I see have to do with the fact that my data has several possible values for each given header and classification. Also all values are not unique.

The best result I have ever got returned a dropdown list based on the header bot returned the entire column rather than limited to the classification values. So for example I had all instances of 'Main Colour' to choose from, not just those of the classification value.

View 2 Replies View Related

Data Validation / Drop Down Menu With Paste Special

Jan 18, 2009

I know how to use the copy and paste special to copy a formula from one row down many rows in that same column. When I do this the formula will automatically change by 1 number {such as =IF(ISBLANK(C5),"",VLOOKUP($C5,Sheet1! $B$3:D4891,3,FALSE)) then when I click on copy and pasted special each following row will change by one number ---- to =IF(ISBLANK(C6),"",VLOOKUP($C6,Sheet1!$B$3:D4892,3,FALSE))

Can this also be done if the row you want to copy and paste is a row with data validation / a drop down menu? I simply tried using the same process for a row that has data validation the row with the validation has for the source =INDIRECT($B$5)

Is there a way to copy this down about 20 rows and have the ($B$5) change in each row by one number {such as ($B$6 THEN $B$7, ETC...) Or do I just have to do the whole data validation process for each row?

View 3 Replies View Related

Populate Data Among 3 Files Using Drop-Down Validation In One File

Nov 29, 2009

I would like to populate data from 1st File(Name:-Master Data) to the 2nd File(Name:-Calculator) using validation list in the 2nd file in such a way that once the Incentive Calculation is done for any store the same data should get populated to the 3rd File(Nameay Out) automatically without manual copying & pasting.

1)Master Data File(1st File):-Contains all the relevant raw data for incentive calculation.

2)Calculator File(2nd File):-Contains a drop-down validation in cell D4(in the sheet Named:-Hyper) and this drop-down contains the list of the stores starting from H001 to H032. I have got the Sumproduct formula to link Master Data File & Calculator File via this Drop-Down list which is yielding the Incentive Amount.

3)PayOut File(3rd File):-This is the where the storewise Incentive amount should finally be stored. I need help in keeping the respective storewise Incentive amount to respective locations even though different store is selected in the Drop Down Validation in the Calculator File.

I will share a small data pertaining to 2nd File(Name:-Calculator) & 3rd File(Nameay-Out) to further explain of what result is expected.

The following figure shows the results of H012 store(when selected via the Drop-Down validation):-
File Name:-Calculator.xls(Sheet Name:-Hyper)

Drop-Down List(=D4)Contains the Store names & links the Calculator File & Master Data File.

H012(D4)

Particulars(B7)Month1(C7)FMCG Sales Target12884356FMCG Sales Achievement17748294

C8=SUMPRODUCT(--('[Master Data.XLS]FMCG'!$D$6:$D$221=$D$4),'[Master Data.XLS]FMCG'!$H$6:$H$221)
C9=SUMPRODUCT(--('[Master Data.XLS]FMCG'!$D$6:$D$221=$D$4),'[Master Data.XLS]FMCG'!$I$6:$I$221)

The Above Sales & Target achievement for store H012(for FMCG Department) yields the Incentive amount in the same Calculator File(Sheet Name:-Hyper) as follows:-
Department(B17)Designation(C17)Incentive Details(D17)Month1(E17)FMCGFloor ManagerIncentive4641FMCGSupervisorIncentive3370FMCGStaffIncentive2276

Now finally the data from the above Incentive Calculation should get populated to the 3rd file named Payout(Sheet name:-Sheet1) as follows:-
Month1Store Name(A2)Staff Incentive(B2)Supervisor Incentive(C2)Floor Manager Incentive(D2)H012227633704641H013 H014

H015

Now suppose If I select H013 from the drop-down cell in Calculator file the incentive amount should get calculated and the same should get transferred to the Pay-Out Sheet below the H012 store incentive amount without changing or altering the H012 incentive calculation and so on for H014/H015 etc.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved