I'm trying to use Workbook_BeforeClose event to delete my custom menus.
However, when I try to pass the custom menu caption to the Sub, I get a compile error (Expected Function or Variable).
I believe this has something to do with global variables declaration or something...
I've seen this done a lot while reading. I've also had help with some code by a few members that have suggested doing this.
View 8 Replies View RelatedI've been trying to pass a variable from the OnChange- event on one sheet to a macro located in module one, but it seems I cant (or havent figured out how anyway). Anyone knows how to do it? The code here give me the error "RefreshSetup(WhatSheet) cannot be found"
Alternativly, maybe someone can come up with a better solution on my entire problem. 3 sheets with webquery. All should be handled in the same way (copy-pasting only), but source and destination-sheet differs. My big problem is if two queries are done at the same time, they conflict with eachother, and data from one query is copied on to the wrong sheet.
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Running Then
RunWhen = Now + TimeSerial(0, 0, 1)
WhatSheet = "HtmlTmp"
Application.OnTime RunWhen, "Module1.RefreshSetup(WhatSheet)"
Else
RunWhen = Now + TimeSerial(0, 0, 3)
WhatSheet = "HtmlTmp"
Application.OnTime RunWhen, "Module1.RefreshSetup(WhatSheet)"
End If
End Sub
Module1:................
I've the following code in my add-in. Strangely the code in the Workbook_Open event executes as expected, but not the Workbook_beforeClose event. May I know the reason?
*********************************************
Private Sub Workbook_Open()
msgbox "hi!"
End Sub
Private Sub Workbook_BeforeClose(Cancel As Boolean)
msgbox "bye!"
End Sub
I've been trying to figure this out all morning, and it's giving me a headache. I'm trying to write some code in the WorkBook_BeforeClose module as shown below:
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Dim ans As Integer
ans = MsgBox(prompt:="Do you want to save the changes to " & ThisWorkbook. Name, _
Buttons:=vbInformation + vbYesNoCancel, Title:="X2O")
Select Case ans
Case Is = vbCancel
Cancel = True
Exit Sub
Case Is = vbYes...............
As you can see, I show a message asking the user if they want to save the workbook or not. Clicking the Cancel and the Yes buttons work fine. However, the No button causes the message to be shown again. If I then click No the second time, the workbook closes!
I read two pages on "Workbook_BeforeClose" trying to find a relative answer. I want to able to close a workbook with out saving and not rely on the user pressing the correct button, can this be done?
View 3 Replies View RelatedIs there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies View RelatedI have the following code, which works perfectly:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim TotalDays As Integer
TotalDays = Range("C65536").End(xlUp).Row + 1
The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.
However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.
How do I add the following, to my previous code?
Range("E8").Value = Cells(7, 6) * 2.5
I am trying to make changes to the Y column where the calculation now looks at column C to see what is entered in that column. If it is "Futures" then it runs the existing formulas but if it equals "Forex" I want it to use the value in column D as the multiplier, where the Futures option uses the hlookup to get the correct multiplier from the Variables sheet. If column C is either "Options" or "Stock_ETF" then i want to just subtract column I from column Y times column P.
I attempted to add additional IF AND functions but got the error message "Too many arguments", so now i am not sure where to go from here.
Here's the original code which worked except when F4 or E4 where blank.
View 3 Replies View RelatedIm needing to achieve what an 11 argument nested if would manage, ie: ...
View 2 Replies View RelatedI'm getting the error that tells me I have more than 30 arguments when trying to get an average of cells across a row. The biggest issue is that I don't want to average all the cells in the row, just some of them.
I tried writing an IF statement for it and failed. What I want is every fourth cell to be totaled into the average. Another way to look at it is that I want every cell under the heading "south" to be totaled into the average.
I have generally used the .Find function in the following form:
View 5 Replies View RelatedI am trying to get two different arguments to work into one cell. I was using the "If" statement eg. if the value of B1 is greater than B2 then use the value in cell A1 else use A2. I also need in the same cell if the value of C1 = B then use the value in D1
What I am looking for is a statement which will decide which statement to use eg if B1 is blank then use the second statement else use the first statement.
It appears that the excel IF statement caps out at eight arguments. Is there a work around for this? I need to enter 29 arguments... Does excel have a CASE or Array function?
Example-works:
=IF((H3="Weight1"),"A",IF((H3="Weight2),"B",IF((H3="Weight3"),"C",IF((H3="Weight4"),"D",IF((H3="Weig ht5"),"E",IF((H3="Weight6),"F",IF((H3="Weight7"),"G",IF((H3="Weight8"),"H",""))))))))
Example-doesn't work:
=IF((H3="Weight1"),"A",IF((H3="Weight2),"B",IF((H3="Weight3"),"C",IF((H3="Weight4"),"D",IF((H3="Weig ht5"),"E",IF((H3="Weight6),"F",IF((H3="Weight7"),"G",IF((H3="Weight8"),"H",IF((H3="Weight9"),"I""")) )))))))
I've heard of calling a sub with arguments but don't believe I'd done it in the past. I want to remove the empty rows in 3 worksheets so that my row count actually stops where the existing data does. The second sub is where that takes place. What is the best way to call the sub to execute on the three sheets?
My thinking had been that if I used the argument ws as worksheet I could simply call the sub with the worksheet name as the argument.
Code:
Option Explicit
Sub PopulateProfit()
Dim wb As ThisWorkbook
'Dim ws As Worksheet
Dim wsProfRep As Worksheet
Dim wsChaseRaw As Worksheet
[Code] ..........
I've created a spreadsheet that calculates both the SUM and the AVERAGE on 2 different rows. So far, so good.
The problem I've come across is that there are 35 different numbers (arguments?) that have to be calculated and from what I see, Excel has a limit of 30.
Is there a way for me to get around this?
If it'll help, I can send the spreadsheet to you so you can see what I'm talking about in the event I didn't properly explain it here.
The 2 basic arguments of the Countif Function (range and criteria) are simple and make sense. However, I've observed instances where the criteria component is in fact a range.
In this case, is what is the syntax instructing the app to count in the first range?
when i use =IF(C5<250,C5*15%,IF(C5>=500,C5*25%),IF(C5>=500,C5*25%)). It says i got to many arguments how can i fix this
View 4 Replies View RelatedUsing VBA are more than 7 arguments allowed with if-then?
View 7 Replies View RelatedThe following is a medical reference equation. I have gender in column B, height in column G and age in column I. There are three age ranges: child, adolescent and adult. These are the individual equations: ...
View 9 Replies View Relatedi have 18 arguements that i want to enter using the "if" formula. however, after entering the data i get a message stating that i have too many arguments.
here is the data that i'm trying to enter:
ALLOYDENSITY
A200.291
22050.285
254SMO0.284
A2000.321
A4000.319
A6000.304
A6250.303
A800HT0.287
A8250.294
C2760.323
C220.290
A2860.289
I7180.296
i start the formula as follows:
=IF(B7=20,".291",IF(B7=2205,".285",IF(B7=254,".284",.............
i drop the letters from column "b" because i stopped getting error messages when i took them out.
Why excel won't accept a simple COUNT function?
This is the formula. It is supposed to count every 4th cell in a column.
=COUNT(F156,F152,F148,F144,F140,F136,F132,F128, F124,F120,F116,F112,F108,F104,F100,F96, F92,F88,F84,F80,F76,F72,F68,F64,F60,F56,F52,F48,F44,F40,F36,F32,F28,F24,F20,F16,F12,F8,F4)
Excel tells that it will accept up to 255 arguments in a COUNT function, but it'll only let me include:
=COUNT(F156,F152,F148,F144,F140,F136,F132,F128,F124,F120,F116,F112,F108,F104,F100,F96,F92,F88,F84,F80,F76,F72,F68,F64,F60,F56,F52,F48,F44,F40)
I have to use this exact same formula as a SUM function as well, but am having the same problem. Neither SUM or COUNT will take all the arguments.
I've attached the file. The tabs in red are the worksheets that won't accept the formula. The green tabs worked fine (they all had less cells to include than the sheets in red.)
01-09-14 RouteSheets SLO.xls‎
I’m using a SUMIF function to evaulate some date. The second argument in the function, the criteria, is that the numbers to be summed are greater than 25 but less than 50.
View 2 Replies View RelatedIm trying to build a little database and the closest thing i have come to manage what i want to do is with IF and Vlookup function.
I have 1 "main page" lets call it "sheet1"
Then i have nomerous of "secondary pages" we call them "sheet2", "sheet3" etc.
The idea is that on my "main page" im using 3 colums "A","B" and "C". "A" and "B" helps deciding where my VLOOKUP function should find the correct value.
The "A" column is planned to decide in what sheet to look for seach word(which is written in "C" column)
Basicly if "A1" is saying "2" its gonna do my VLOOKUP in "sheet2" , and if "A1" sais "3" its gonna look for my "search word" in "sheet3" etc.
My formula at this point (witch is working for 2 pages)
=IF(A1=2;VLOOKUP(B1;sheet1!A1:B6;2;FALSE);IF(A1=3;VLOOKUP(B1;sheet2!A1:B6;2;FALSE)))
This is working perfectly.
If i write "2" in "A1" and "car" in "B1" VLOOKUP jumps to "sheet1" lookup "car" and return the value in the second column (in this case 2"
and if i write "3" in "A1" and keep "car" in "B1" VLOOKUP jumps to "sheet2" and return the carvalue for this sheet (in this case 22).
Then the problem
The problem is ofcourse that if i wanna continue with this formula in the same box, i wanna make it keep looking in more sheets depending on what number i have in "A1"
If i put number 5 in it goes to "sheet5" and look for "car" and return valuve.
But at this point the formula is too big for excel.
So i guess my question is. Is there any workaround for this? Can anyone come up how to approach this in another way? (im out of ideas)
Or am i doomed and have to learn programming to get my idea to work?
I'm trying to understand the consequences of conditional arguments for the function SUMPRODUCT(). For example, this function was kindly provided by SGH:
View 2 Replies View RelatedMy question is about passing arguments to UserForm procedures. I've created a Main procedure. Main calls a sub procedure and returns an array. Obviously Main can now use the array. But then Main calls a sub procedure to open my userform.
All of my userform sub procedures need to use the array I created in Main. Do I have to pass the array into all of my userform procedures? Into the UserForm_Show procedure? And then again into UserForm_Initialize? And then again into ComboBox_Change? I don't understand how to give my UserForm procedures the array from my Main procedure.
I'm using the following at the top of the declarations in the module, but without going into the VBE and manually changing the False to True, is there a way to do this programmatically?
I have a misc worksheet where I can store True and False, but how can I link it to the code.
Code:
#Const DEBUG_ = False
I'm trying to use multiple arguments for a date, but they are not going through for some reason
the two I'm using are:
=IF(month(a1)=month(today())+3,"yes","")
=IF(year(a1)=year(today()),"yes","")
each one is fine on its own, but if I try to put them together using "and" it does not work.
I am trying to have the word yes show up when we are three months away (not 90 days), but also I want it to show only this years results and not next years.
Code:
Private Sub Userform_Initialize(Change As Boolean, Optional Brand As String)
I want to load a userform with arguments, is this ever going to work?