Worksheet Change Event :: Find Email Addresses
Oct 16, 2007
Private Sub Worksheet_Change(ByVal Target As Range)
Application.EnableEvents = False
If Target.Count > 1 Then Exit Sub
If Target.Column = 1 Then
If Target = "" Then
Cells(Target.Row, 3).ClearContents
Else: If Target.Value = "test" Then Cells(Target.Row, 3) = my.Email.co.uk
End If
End If
Application.EnableEvents = True
End Sub
Basically, my target column is column A, i have 200 employee numbers, now we have to find the email addresses manually which is useless so i want to spend the time writing some code like:
If the target column is 123456 then the offset column D is email address
If the target column is 654321 then the offset column D value is email address.
I have 200 statements like this ill need to add unless anyone has any suggestions, perhaps select case structure?? I dont really know where to start an so i await your replies.
View 9 Replies
ADVERTISEMENT
Mar 27, 2009
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies
View Related
Sep 16, 2013
I am using Excel 2010. I have been given a task at work that can save my team a lot of time if I can solve the problem. Every month, we have a spreadsheet with about 5000 rows that we have to email. In each row, there is a range that we have to email to a specific email. For example, I would have to copy and paste Range A2-R2 in the body of the email, and then email it to whatever email is in cell S2. I would then continue this for the next 5000 lines, making it a possibility that i will be sending 5000 emails manually.
I have been trying to come up with a solution through VBA that would automatically send these emails. My goal is to automatically send the Range A2-R2 to outlook email, then cell S2 into the "To" email address box, and then automatically send it. So far, i have successfully been able to send one row, but cannot figure out how to loop it for the remainder of the rows.
A couple other key points are that I have column headings as well (Range A1-R1). If possible, I want to be able to include the column headings in the email body as well. Example - first email would be range A1-R2. second email would be range A1-R1 and A3-R3, and so forth. The body of the email would also contain a standard script, such as "Please review the information below."
The goal here is to save everyone from having to send 5000+ manual emails. This would be a big boost for my team.
Code:
Sub Email()
Dim rng As Range
Dim OutApp As Object
[Code].....
View 5 Replies
View Related
Jun 17, 2009
an event macro to change the font colour of a cell whose value changes as a result of a calculation.
View 9 Replies
View Related
Oct 5, 2009
I have a sheet using VLookup to find EMail and Web addresses. I can get the address to show up but not as an active URL address. Is it possible to have the address "active" so I can click on it and activate the EMail or Web Site?
View 5 Replies
View Related
Jul 21, 2009
Attached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
View 4 Replies
View Related
Dec 6, 2011
Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.
My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.
Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.
how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?
View 5 Replies
View Related
Oct 13, 2009
I am using the following code and it works great the only problem is that when I have more then one email address in the same cell it will not send the email. Even if I seperate it with a semicolon. It work fine if I have just one email address in the email field. How can I get it to send the same info to different email addresses.
View 4 Replies
View Related
Jun 12, 2007
In cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now it’s 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.
View 3 Replies
View Related
Jan 10, 2009
looking to only allow a check ("x") in a column for a reconcile - type worksheet. Am I close?
Private Sub Worksheet_Change(ByVal Target As Range)
'Data protection. Only allow "x" in the "cleared" column. If anything else is entered, a message box informs the user
'and the cell contents are cleared.
Dim val As Variant
Dim msg As String
If ActiveCell.Value "x" Then
msg = "You can only enter an X in the cleared column."
ActiveCell.ClearContents
End If
End Sub
View 9 Replies
View Related
Feb 7, 2014
I am trying to run the below code whenever the result of cells (22,x) changes. Cells (22,x) contains a formula.
[Code] .....
View 2 Replies
View Related
May 28, 2009
trying to get a worksheet change event to work. Basically the code below calls the time_start procedure when cell J16 downwards is selected.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row > 15 And Target.Column = 10 Then
Call time_start
Else
End If
End Sub
However, I am lost from here on....Let me try and explain what it is I am trying to do. This seems so simple if you know how. Each time that the word "Completed" is entered in to a cell from J16 onwards, the cell two columns to the right on the same row is selected and the current date is entered.
If the word "Completed" is deleted, I want the date on that row to be deleted.
I would also like the choices "Completed" and a blank cell to be given in a validation list via a dropdown if possible to avoid occurances of "Complete" etc and mis-spellings but I understand that a bug may stop me from using this functionality. I am running Excel 2002 on a Windows XP Professional OS.
View 9 Replies
View Related
May 7, 2013
I have the below vba and would like to have the '''event calculated ''' on any event on the worksheet. Right now it only update if updating the val1 thru val6 cells. How can i get the worksheet to update on any event or change on the sheet?
Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
fr = Range("a65536").End(xlUp).Row
Set Rng = Range("a2" & ":n" & fr)
If Intersect(Target, Rng) Is Nothing Then Exit Sub
[Code] .......
View 2 Replies
View Related
Mar 6, 2007
I have looked at the threads concerning cell change events but cannot find a solution to my situation. I have a worksheet with a cell using a validation list. I wish to exicute a procedure whenever the dropdown list is changed in that one cell. Everything I have seen in the Worksheet event threads is evaluating the contents of a cell and I am attempting to exicute if the cell changes.
View 2 Replies
View Related
Aug 22, 2007
I have a spreadsheet with a table of values in range E5 to T158.
A macro populates the table by looking up values on other sheets in the book. If the macro finds a value in the lookup for Row 7 of any column (ie E7,F7...T7) it populates the rest of the column with that value (E7 value gets pasted to E8:E158) THEN it protects the cells it pasted (E8:E158).
If the macro does NOT find a value for row 7, it simply skips it, leaving it blank, and continues to row 8 until it reaches row 158 of each column E to T.
I want to give the user flexibility with these values. So if the user either deletes E7 or changes the value of the contents in E7, I want to unprotect the cells of rows 8 to 158 for that column.
I have created a
Private Sub Worksheet_Change(ByVal Target As Range)
in the private module for that sheet below. I thought it was working but it isn't doing anything when I change or delete the value in Cell E7 for example. Please help!
Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if more than one cell is changed
If Target.Cells.count > 1 Then Exit Sub 'Or IsEmpty(Target)
View 5 Replies
View Related
Nov 22, 2011
I'm trying to create a worksheet change event macro that will change the colour of the cell when you update the value in that cell.
I have column C with 140 rows and when one of the cells in the column is changed by the user, I need the same cell to highlight in yellow. The highlight would then be removed once the user has acted on the change in the value, and that'll be done in another macro.
I understand I need a worksheet change event macro in the specific sheet and need the following code for yellow:
Code:
.Interior.Color = RGB(255,255,0)
, but any further I get stuck as it involves 'target addresses'
View 2 Replies
View Related
Oct 1, 2013
combine two Worksheet Change event macros into the one macro? The macros are listed below.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)On Error GoTo exitHandler
Dim rngDV As Range
Dim lRow As Long
Dim lCol As Long
[Code]...
exitHandler:
Application.EnableEvents = True
End Sub
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("O:O")) Is Nothing Then
Application.EnableEvents = False
[Code]...
View 7 Replies
View Related
Nov 30, 2006
I have the following code that should pop up a message when column E is left blank when "other" is typed into column D. But I cannot get it to work.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range, LastRow As Range
Dim x As Integer
If Target.Count > 1 Then Exit Sub
Set rng = Range("F:F")
If Intersect(Target, rng) Is Nothing Then Exit Sub
If Target = "" Then
For x = 1 To 5000
If Cells(x, 4).Value = "Other" And Cells(x, 5).Value = "" Then
Answer = MsgBox("If other, please state", vbOKCancel, "CONFIRMATION")
End If
Next x
End If
End Sub
View 9 Replies
View Related
Mar 28, 2007
I have the following code that 'sort of' works.
Private Sub Worksheet_Change(ByVal Target As Range) ...
View 9 Replies
View Related
Jul 31, 2008
In Col D of my spreadsheet, I have a list of security codes, in this list there is a security code "all", i need a macro that will add 1 to the code, so it reads "all1", now i need the macro to run as soon as new data is pasted to sheet "Lending", the ranges in Col D do change on a daily basis therefore cell reference for security codes is not fixed.
Can this be achieved? ............
View 9 Replies
View Related
Mar 5, 2009
I am using Excel 2007, and I have a macro (that is working) that I would like to run whenever there has been a new selection in a dropdown list on my worksheet. I have done this many times before in other workbooks, and I have always used:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
End Sub
To my knowledge this should trigger the macro when the dropdown selection changes. However, this time it is not working. The macro runs fine manually, but it does not run when the dropdown selection changes.
View 9 Replies
View Related
Apr 25, 2009
This is the code on the Worsheet Change event.
Private Sub Worksheet_Change(ByVal Target As Range)
'Define the RMAs range and count the RMA ships. Do the rest of the math based on this calculation.
Dim intRMACol As Integer, EndRow As Integer, intRMAShips As Integer, LastCol As Integer
Dim rngRMAs As Range, rngHome As Range, sht As Worksheet
Set sht = ActiveWorkbook.ActiveSheet
Set rngHome = Cells(1, 1)
rngHome.Activate
EndRow = Range("A" & Rows.Count).End(xlUp).Row
intRMACol = Cells.Find(What:="RMA#", After:=[A1], SearchOrder:=xlByColumns, SearchDirection:=xlNext).Column
Set rngRMAs = rngHome.Offset(1, intRMACol - 1).Resize(EndRow, 1)
rngRMAs.Name = "RMAs"
rngHome.Offset(1, LastCol + 1).Formula = "=COUNTA(RMAs)"
intRMAShips = rngHome.Offset(1, LastCol + 1).Value
rngHome.Offset(1, LastCol).Formula = "=SUM((" & EndRow & " - 1) - " & intRMAShips & ")"
rngHome.Offset(1, LastCol + 2).FormulaR1C1 = "=SUM(RC[-2] : RC[-1])"
End Sub
I keep getting stuck when trying to set the intRMACol variable. I have used the code all over the place, but only in Modules, never on a worksheet event. EndRow, the variable right above, sets correctly so I don't get it.
Also, do I have to define the Target variable? Am I going about this the right way? I basically want three formulas to calculate when any change is made on the worksheet.
View 9 Replies
View Related
Nov 9, 2009
I'm trying to insert a worksheet change event using VBA. I have this sample code from here -
http://www.cpearson.com/Excel/vbe.aspx
Sub CreateEventProcedure()
Dim VBProj As VBIDE.VBProject
Dim VBComp As VBIDE.VBComponent
Dim CodeMod As VBIDE.CodeModule
Dim LineNum As Long
Const DQUOTE = """" ' one " character
Set VBProj = ActiveWorkbook.VBProject
Set VBComp = VBProj.VBComponents("ThisWorkbook")
Set CodeMod = VBComp.CodeModule...................
View 9 Replies
View Related
Aug 4, 2006
I have this code working fine. It applies conditional formating to two rows ((K3:K65) and (J3:J65)) and checks when a value changes in row B to reaplpy the formatting. I'd like to had add more columns to it. It would have apply the same conditonal formatting on rows ((O3:O65) and (P3:P65)) but when a value changes in row (N3:N65)
So basically, I want to keep the first working part of the code and have it to check at more rows with a different reference for the conditionnal formatting.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
Dim rngJ As Range
If Target.Count > 1 Then Exit Sub
Set rng = Union(Range("B3:B65"), Range("J3:J65"))
If Intersect(Target, rng) Is Nothing Then Exit Sub
Set rngJ = Range("K" & Target.Row)
Select Case rngJ.Value
Case ""
rngJ.Interior.ColorIndex = xlNone
rngJ.Offset(0, -1).Interior.ColorIndex = xlNone
Case Is >= 20.............................
View 2 Replies
View Related
Aug 29, 2006
I am trying to make a macro run automatically based on info entered in a cell. The problem is I need this code on at least three separate sheets in the work book. It doesent work when I try to use the same basic code. The code I am using is below.
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
Dim lLastRow As Long
Dim rgArea As Range, rgCell As Range
Dim COL_B As Integer
COL_B = 2
Dim COL_X As Integer
COL_X = 24
Dim ROW_FIRST As Long
ROW_FIRST = 5
' Find the last row of date in the "Approved" worksheet
lLastRow = FindLastRow(SZ_WS_APPROVED, COL_B)
' Set a reference to the changed cells in column X
Set Target = Intersect(Target, Range(Cells(ROW_FIRST, COL_X), Cells(lLastRow, COL_X))).........................
View 5 Replies
View Related
Aug 31, 2006
Private Sub Worksheet_Change(ByVal Target As Excel. Range)
Dim S As String, X As Variant, n As Long
If Target.Column <> 3 Or Target.Cells.Count <> 1 Then Exit Sub
If IsEmpty(Target) Then Exit Sub
S = Target.Text
On Error Goto Reset
n = Application.Substitute(S, "-", "")
On Error Goto Reset
Application.EnableEvents = False
X = Application.Match(n, Workbooks("Database.xls"). Sheets("Products").Range("B1:B14000"), 0)
If IsNumeric(X) Then
Target.Offset(0, -1) = Workbooks("Database.xls").Sheets("Products").Cells(X, 1).Value
Else............................
But each time i add it in, it ether's turns off the second statement and second works or vice versa. How can make both codes work at the same time without conflicting each other.
View 3 Replies
View Related
Sep 1, 2006
I am trying to do a conditional format of 0 to 2 is red, 3 to 4 is yellow and 5 is green. However I also need to have a cell that is blank to remain white and this is the part I am having problems with.
I found the following code since I cannot use the standard conditional formating in excel since it needs 4 conditions.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("H3:H12")) Is Nothing Then
Select Case Target
Case 0 To 2
icolor = 3
Case 3 To 4
icolor = 6
Case 5
View 7 Replies
View Related
Nov 2, 2006
Is it possible for a combo box selection, linked to a cell on the same sheet to fire a worksheet change event? I can't seem to find a way to do it.
View 3 Replies
View Related
May 13, 2007
This is my
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("D6:D6000")) Is Nothing Or Intersect(Target, Range("D6:D6000")) = "" Then
If Intersect(Target, Range("F6:F6000")) Is Nothing Or Intersect(Target, Range("F6:F3000")) = "" Then
If Intersect(Target, Range("I6:I6000")) Is Nothing Or Intersect(Target, Range("I6:I6000")) = "" Then
Exit Sub
Else
Do Something......
End If
End If
End If
End Sub
when excution comes to this line
If Intersect(Target, Range("D6:D6000")) Is Nothing Or Intersect(Target, Range("D6:D6000")) = "" Then
a run time error (91) appears, it tells object variable or with block variable not set.
View 9 Replies
View Related
Nov 13, 2008
I have a code where column K is not responding to a value being deleted out of column J. I've highlighted the portion of the code dealing with this. Deletion should trigger the worksheet_change event to clear out column K as it's supposed to. how to get deletion to take effect?
View 4 Replies
View Related
