ComboBox Fires Worksheet Change Event

Nov 2, 2006

Is it possible for a combo box selection, linked to a cell on the same sheet to fire a worksheet change event? I can't seem to find a way to do it.

View 3 Replies


ADVERTISEMENT

Control Change Event Fires Via Unknown Trigger

Nov 17, 2007

So, I have a worksheet with a bunch of combo boxes. The code for the worksheet is below. The issue I'm having is that anytime I drag and drop a cell anywhere on the page, every single control on the worksheet triggers. VB runs through all the code on the sheet, TWICE(I used the debugger extensively trying to find a solution), and causes dozens of successive re-calculations of the entire workbook, which has a couple of tables. This happens on any cell drag-drop on the worksheet, or when I click the command button on the screen.

I have no clue what is causing this. Even more bizarre, it seems to trigger a custom function which is located in a separate module, and isn't even utilized on the worksheet in question. I guess this is because it makes the whole workbook re-calculate?

View 7 Replies View Related

Combo Box Event Fires When It Shouldn't

Jul 13, 2007

I have a combo box that insert certain information in the row corresponding to the active cell. Apparently the events that trigger the code are generated by the combo box ( change or on click) but pressing any key also triggers the events of the combo box.(this is undesirable)

The following code is excuted even when any key is pressed. Any suggestions on how I can go around this problem? (get this code executed ONLY when a combo box event is triggered)

Private Sub cmbLinkInfo_Click()

'The record is inserted only if the user is inside certain range
'The range is inside the affected links table and between the columns C and F

If (ActiveCell.Row > 25) And _
(ActiveCell.Column > 2) And _
(ActiveCell.Column < 7) Then
'<
Cells(ActiveCell.Row, 3).Value = cmbLinkInfo.List(cmbLinkInfo.ListIndex, 0)
Cells(ActiveCell.Row, 4).Value = cmbLinkInfo.List(cmbLinkInfo.ListIndex, 1)
Cells(ActiveCell.Row, 5).Value = cmbLinkInfo.List(cmbLinkInfo.ListIndex, 2)
Cells(ActiveCell.Row, 6).Value = cmbLinkInfo.List(cmbLinkInfo.ListIndex, 3)
'>
End If
End Sub

View 7 Replies View Related

An Event That Fires Every Time Anything Is Clicked Within A Userform?

Apr 12, 2014

Is there an event that fires every time anything is clicked within a userform? I have seen the userform_Click() event however, this only works if the userform is clicked directly and not if something like an image is clicked on top of it.

View 1 Replies View Related

BeforeUpdate Event Fires Multiple Times

Feb 3, 2008

I wrote some code to validate an inputfield. I want to keep the focus on this field until a correct (numeric) value is inputed. Therefore I use teh beforeUpdate event instead of the afterUpdate event. Some strange things happen (see code below):

1. When I press enter after putting some non-numeric data in the inpBedrag2 field the msgbox is displayed three times in a row. This doesn't happen when the field loses focus by clicking another field (-> msgbox only displays once = correct behaviour)
2. What's really driving me nuts is the fact that the (more or lesse the same sub) works perfectly.

What am I doing wrong? I'm not getting it. Probably I'm doing something very stupid ... but I can't figure it out myself.

View 9 Replies View Related

Worksheet Change Event :: (ByVal Target As Range) Event In Module After Creating A Sheet

Mar 27, 2009

Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?

View 9 Replies View Related

Combobox Change Event

Apr 17, 2009

Dim bfr As Long
bfr = ComboBox1.Value
ComboBox1.Value = bfr: Exit Sub

how come this gives me a "cant change property" error!?

The code is inside my combobox change event...

View 9 Replies View Related

Click Event Fires But Doesn't Work Under Initialize Procedure

Jun 18, 2014

Why this code DOES NOT work:

[Code].....

But this one DOES

[Code] .....

Why would a click event execute but the same code doesnt fire on a initialize event?

View 3 Replies View Related

Populate Textbox From Change Event In Combobox

Mar 3, 2014

I have attached an example set up with a user form I am building. I currently have the first combo box loading upon the initialize of the user form an from that I choose one of the product types and it gives me a list with all product names associated in the second combo box. Upon a change event in the second combo box I want to populate the 3rd Column with the count of how many of that Product type.

I have a couple different code set ups in the attached sheet and neither works.

CmboBxtoTextbox.xlsm‎

View 7 Replies View Related

ComboBox Change Event Gives Error 1004

Jan 3, 2013

The following code works fine, but when I put the code in an ActiveX Combobox Change Event it gives a run-time error 1004. ("Select Method of Range class failed")The error occurs on the following line

Code:
Worksheets("SAVED").Range("A" & l).Select

Code:
Dim l As Long
Application.ScreenUpdating = False
l = Application.WorksheetFunction.Match(Worksheets("DATA").Range("O34"), Worksheets("SAVED").Range("A1:A10000"), 0)
Worksheets("SAVED").Activate
'ROSTER===
Worksheets("SAVED").Range("A" & l).Select
Selection.Resize(1, 739).Offset(1, 2).Copy

[code]......

View 2 Replies View Related

Change Event: Not Firing From Cell Changed By ComboBox

Dec 4, 2006

Private Sub Worksheet_Change(ByVal Target As Range)
With Target.Cells(1, 1)
If Not Intersect(.Cells, Range("b3:b6")) Is Nothing Then
Range("b7") = "Not Found"
For i = 3 To 6: txt = txt & Cells(i, "b").Value & "_": Next
For Each r In Range("m3", Cells(3, Columns.Count).End(xlToLeft))
For i = 0 To 3: txt2 = txt2 & r.Offset(i).Value & "_": Next
If txt = txt2 Then
Range("b7").Value = r.Offset(4).Value
Exit For
End If
txt2 = ""
Next
ElseIf Not Intersect(.Cells, Range("b16:b19")) Is Nothing Then
Range("b20") = "Not Found".....................

I'm working with this code right now. The problem is the macro will only work if i type the numbers manually. if the values are retrieved from a combobox, the code above down not work as it cannot read the values.

View 9 Replies View Related

Prevent Combobox Change Running Other Control Event Procedures

May 17, 2008

I have a userform with a combobox in it that's rowsource is a column of company names in a worksheet. When a company name is chosen, a combobox change private sub runs and many userform textboxes are populated with information about the company that was chosen from the combobox dropdown. This information is stored on a worksheet. I then want to edit any of the information in these textboxes. Once my edits are made I have a CommandButton that is pressed to save the edit changes. This CommandButton runs a private sub that disables the combobox (thinking this would prevent the combobox private sub from running), deletes the row that the information originated from, and then SHOULD make a new row of values based on the contents of the textboxes following the edits. The problem is that the CommandButton coding that deletes the row causes the combobox change private sub to run because the company that had been selected is now the missing from the rowsource; this causes an error.

View 8 Replies View Related

Worksheet Change Event :: Change Color As A Result Of Calculation

Jun 17, 2009

an event macro to change the font colour of a cell whose value changes as a result of a calculation.

View 9 Replies View Related

When Change The Worksheet Selection Change Event Nothing Is Happenning

Jul 21, 2009

Attached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.

When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.

View 4 Replies View Related

Worksheet Change Event Triggered By Formula Change?

Dec 6, 2011

Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.

My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.

Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.

how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?

View 5 Replies View Related

Worksheet Events: Use A Worksheet Event To Change The Background Of The Current Month Two Columns In The Range To Yellow Color

Jun 12, 2007

In cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now its 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.

View 3 Replies View Related

Worksheet Change Event :: In A Column For A Reconcile Worksheet

Jan 10, 2009

looking to only allow a check ("x") in a column for a reconcile - type worksheet. Am I close?

Private Sub Worksheet_Change(ByVal Target As Range)
'Data protection. Only allow "x" in the "cleared" column. If anything else is entered, a message box informs the user
'and the cell contents are cleared.
Dim val As Variant
Dim msg As String
If ActiveCell.Value "x" Then
msg = "You can only enter an X in the cleared column."
ActiveCell.ClearContents
End If
End Sub

View 9 Replies View Related

Worksheet Change Event?

Feb 7, 2014

I am trying to run the below code whenever the result of cells (22,x) changes. Cells (22,x) contains a formula.

[Code] .....

View 2 Replies View Related

VBA Worksheet Change Event

May 28, 2009

trying to get a worksheet change event to work. Basically the code below calls the time_start procedure when cell J16 downwards is selected.

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row > 15 And Target.Column = 10 Then

Call time_start
Else
End If

End Sub

However, I am lost from here on....Let me try and explain what it is I am trying to do. This seems so simple if you know how. Each time that the word "Completed" is entered in to a cell from J16 onwards, the cell two columns to the right on the same row is selected and the current date is entered.

If the word "Completed" is deleted, I want the date on that row to be deleted.

I would also like the choices "Completed" and a blank cell to be given in a validation list via a dropdown if possible to avoid occurances of "Complete" etc and mis-spellings but I understand that a bug may stop me from using this functionality. I am running Excel 2002 on a Windows XP Professional OS.

View 9 Replies View Related

Userform Textbox Event That Fires After I Exit The Textbox

Feb 2, 2010

I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.

I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.

View 11 Replies View Related

Worksheet Change Update On Any Event

May 7, 2013

I have the below vba and would like to have the '''event calculated ''' on any event on the worksheet. Right now it only update if updating the val1 thru val6 cells. How can i get the worksheet to update on any event or change on the sheet?

Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
fr = Range("a65536").End(xlUp).Row
Set Rng = Range("a2" & ":n" & fr)
If Intersect(Target, Rng) Is Nothing Then Exit Sub

[Code] .......

View 2 Replies View Related

Worksheet Cell Change Event

Mar 6, 2007

I have looked at the threads concerning cell change events but cannot find a solution to my situation. I have a worksheet with a cell using a validation list. I wish to exicute a procedure whenever the dropdown list is changed in that one cell. Everything I have seen in the Worksheet event threads is evaluating the contents of a cell and I am attempting to exicute if the cell changes.

View 2 Replies View Related

Worksheet Change Event Not Firing

Aug 22, 2007

I have a spreadsheet with a table of values in range E5 to T158.

A macro populates the table by looking up values on other sheets in the book. If the macro finds a value in the lookup for Row 7 of any column (ie E7,F7...T7) it populates the rest of the column with that value (E7 value gets pasted to E8:E158) THEN it protects the cells it pasted (E8:E158).

If the macro does NOT find a value for row 7, it simply skips it, leaving it blank, and continues to row 8 until it reaches row 158 of each column E to T.

I want to give the user flexibility with these values. So if the user either deletes E7 or changes the value of the contents in E7, I want to unprotect the cells of rows 8 to 158 for that column.

I have created a

Private Sub Worksheet_Change(ByVal Target As Range)

in the private module for that sheet below. I thought it was working but it isn't doing anything when I change or delete the value in Cell E7 for example. Please help!

Private Sub Worksheet_Change(ByVal Target As Range)

'Do nothing if more than one cell is changed
If Target.Cells.count > 1 Then Exit Sub 'Or IsEmpty(Target)

View 5 Replies View Related

Cell Formatting On Worksheet Change Event

Nov 22, 2011

I'm trying to create a worksheet change event macro that will change the colour of the cell when you update the value in that cell.

I have column C with 140 rows and when one of the cells in the column is changed by the user, I need the same cell to highlight in yellow. The highlight would then be removed once the user has acted on the change in the value, and that'll be done in another macro.

I understand I need a worksheet change event macro in the specific sheet and need the following code for yellow:

Code:
.Interior.Color = RGB(255,255,0)

, but any further I get stuck as it involves 'target addresses'

View 2 Replies View Related

Combine Two Macros In Same Worksheet Change Event

Oct 1, 2013

combine two Worksheet Change event macros into the one macro? The macros are listed below.

Code:

Private Sub Worksheet_Change(ByVal Target As Range)On Error GoTo exitHandler
Dim rngDV As Range
Dim lRow As Long
Dim lCol As Long

[Code]...

exitHandler:

Application.EnableEvents = True
End Sub
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("O:O")) Is Nothing Then
Application.EnableEvents = False

[Code]...

View 7 Replies View Related

Worksheet Change Event To Pop Up A Message When Typed

Nov 30, 2006

I have the following code that should pop up a message when column E is left blank when "other" is typed into column D. But I cannot get it to work.

Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range, LastRow As Range
Dim x As Integer
If Target.Count > 1 Then Exit Sub
Set rng = Range("F:F")
If Intersect(Target, rng) Is Nothing Then Exit Sub
If Target = "" Then
For x = 1 To 5000
If Cells(x, 4).Value = "Other" And Cells(x, 5).Value = "" Then
Answer = MsgBox("If other, please state", vbOKCancel, "CONFIRMATION")
End If
Next x
End If
End Sub

View 9 Replies View Related

Worksheet Change Event And Clearing Contents

Mar 28, 2007

I have the following code that 'sort of' works.

Private Sub Worksheet_Change(ByVal Target As Range) ...

View 9 Replies View Related

Macro Needed For Worksheet Change Event

Jul 31, 2008

In Col D of my spreadsheet, I have a list of security codes, in this list there is a security code "all", i need a macro that will add 1 to the code, so it reads "all1", now i need the macro to run as soon as new data is pasted to sheet "Lending", the ranges in Col D do change on a daily basis therefore cell reference for security codes is not fixed.

Can this be achieved? ............

View 9 Replies View Related

Worksheet Selection Change Event Not Triggered

Mar 5, 2009

I am using Excel 2007, and I have a macro (that is working) that I would like to run whenever there has been a new selection in a dropdown list on my worksheet. I have done this many times before in other workbooks, and I have always used:

Private Sub Worksheet_SelectionChange(ByVal Target As Range)

End Sub

To my knowledge this should trigger the macro when the dropdown selection changes. However, this time it is not working. The macro runs fine manually, but it does not run when the dropdown selection changes.

View 9 Replies View Related

Worksheet Change Event :: Trying To Set The IntRMACol Variable

Apr 25, 2009

This is the code on the Worsheet Change event.


Private Sub Worksheet_Change(ByVal Target As Range)

'Define the RMAs range and count the RMA ships. Do the rest of the math based on this calculation.
Dim intRMACol As Integer, EndRow As Integer, intRMAShips As Integer, LastCol As Integer
Dim rngRMAs As Range, rngHome As Range, sht As Worksheet
Set sht = ActiveWorkbook.ActiveSheet
Set rngHome = Cells(1, 1)
rngHome.Activate
EndRow = Range("A" & Rows.Count).End(xlUp).Row
intRMACol = Cells.Find(What:="RMA#", After:=[A1], SearchOrder:=xlByColumns, SearchDirection:=xlNext).Column
Set rngRMAs = rngHome.Offset(1, intRMACol - 1).Resize(EndRow, 1)
rngRMAs.Name = "RMAs"
rngHome.Offset(1, LastCol + 1).Formula = "=COUNTA(RMAs)"
intRMAShips = rngHome.Offset(1, LastCol + 1).Value
rngHome.Offset(1, LastCol).Formula = "=SUM((" & EndRow & " - 1) - " & intRMAShips & ")"
rngHome.Offset(1, LastCol + 2).FormulaR1C1 = "=SUM(RC[-2] : RC[-1])"
End Sub

I keep getting stuck when trying to set the intRMACol variable. I have used the code all over the place, but only in Modules, never on a worksheet event. EndRow, the variable right above, sets correctly so I don't get it.

Also, do I have to define the Target variable? Am I going about this the right way? I basically want three formulas to calculate when any change is made on the worksheet.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved