I have a formula that adds the contents of a row if a box is ticked. It then averages the result. This works fine, but now I only want it to add the contents of every other column before averging it. Can anyone adapt the formula below to allow me to do this?
=SUMIF(E73:P73,TRUE,E9:P9)/MAX(1,COUNTIF(E73:P73,TRUE))
I have drop-down list in cell C4 and inserted Checkbox next to it. Drop-down list has a blank default value. I want Checkbox to be ticked If value in C4 is not blank. My code so far is:
[Code] ......
I attached sample spreadsheet : EF989727_re.xlsm‎
I need to make sure that two checkbox's are ticked before my macro is run. How do I change this into an "AND" statement?
Sub Email1Macro()
If Sheet1.CheckBox1 = True Then
< my commands here>
Else
MsgBox "You must tick the checkbox before you can continue"
End If
Exit Sub
End Sub
I just recently got my hands on a very complicated excel tool, which I would like to "simplify". Its probably going to take a series of questions but the first one would be:
Imagine a list of written questions in excel. Now I need to insert a checkbox next to every question and the ones that are ticked, should (after clicking an "export" button) export themselves to another excel document.
the code I would need to enable a command button only if any one of 3 checkboxes are ticked?
The command button is cmdenter and the checkboxes are 1, 2 and 3.
I have a spread sheet with various tick boxes, that when ticked calculate an accumulative percentage in a cell. This cell is the basis of my graph.
E.g. if the cell displays 80% - the chart with show 80% - simple.
However, I want to write a vba code that changes the fill colour of the chart depending on the percentage.
i.e. if the percentage data = 0-49% I wish the chart to display as red. 50-69% - yellow and 70%+ = green.
If I protect a sheet but tick the boxes to allow sorting and autofilter I still get an erro when I try to use the sort buttons on the autofilter.
It allows me to use the filters but as soon as I sort I get told to unprotect the cells im trying to sort.
Is there a way around this where I can keep formulas from being touched but allow sorting of data through autofilter?
I have a macro that seems to work okay for older versions of Excel - I use Office XP (2002) tell me if this will work for newer versions (2007 / 2010)?
KB1017 - Trust access to VBA project
Code:
Function VBATrusted() As Boolean
On Error Resume Next
VBATrusted = (Application.VBE.VBProjects.Count) > 0
Exit Function
End Function
Private Sub Workbook_Open()
If Not VBATrustedAccess() Then
[code]....
I was thinking that i should probably have
VBATrusted = -1
as the third line so that it is negative unless the tick is there. No way of checking older versions right now though.
I'm creating a basic form or templateusing Excel 2010 where the user will fill out information (See attached screenshot) I'd like to incorporate two a check boxes, that when ticked, change the display of the second table, either adding, removing or splitting of of the current columns in to two?
Is this, or any variation of, possible using Excel 2010.
I have attached a workbook stating my problem.
file1.xlsx‎
I am trying to combine the contents of two cells depending on the contents of another, I have tried to use the If function but am coming up stuck!
I have provided a link to the example file below:
[URL]
I thought this was a pretty simple formula but I am having difficulty creating it. I am attaching a little test spreadsheet. Sheet 1 is where the data will be entered. The Reimbursed column has a drop down choice of yes or no. The next 2 columns are the cost of registration and the cost of accommodations. On sheet 2 is where I would like the formulas. So in cell A4 I would like a formula that says if B3 on sheet 1 is Yes populate this cell with the contents of Cell C3 only, B4 of sheet 2 would then be B3 if A3 on sheet 3 is Yes and so on with the Not reinbursed if sheet 1 the Reimbursed column is no.
View 3 Replies View RelatedI have a column in my .XLS whose contents I want to change depending on what the contents of the cells of a different column are. However, I only want two cells from the same row to be dependent on each other. So, for example, if $A$1 reads "1" then $B$1 should read "apple" and if $A$2 reads "1" then $B$2 should read "apple"; if $A$12 reads "3" then $B$12 should read "pavement" etc.
View 11 Replies View RelatedI have a list of Catalog which contains more than 5000 numbered items as shown below sample. Colum A is Material number and Colum B is the detailed description of material. The description in Colum B is written in one or more rows. I,e 90100100(A2) having 3 rows(B2:B4), the next material number (A5) having 4 rows(B5:B8)….. I need to apply a formula that Contents of all the rows of item A2 in one row in column C2 and contents of the rows of item A5 in one row in column C5…….till end of the list. Each row to be separated with a comma(,). Is there any formula or macro to fill for all the materials?...................
View 5 Replies View RelatedI am writing some VB code to change a comma separated text to individual columns
Selection.TextToColumns Destination:=Range("O14"), DataType:=xlDelimited, _
TextQualifier:=xlDoubleQuote, ConsecutiveDelimiter:=False, Tab:=True, _
Semicolon:=False, Comma:=True, Space:=False, Other:=True, OtherChar:= _
"*", FieldInfo:=Array(Array(1, 1), Array(2, 1), Array(3, 1), Array(4, 1)), TrailingMinusNumbers:=True
When I run the macro, it asks me if I want to replace the contents of the destination cells. How do I get rid of this prompt? I have tried to clear the contents of the cells prior to running the macro, and have also coded:
Application.AlertBeforeOverwriting = False
but, it still prompts me.
If “Dollar” is in cell B3 insert a row above it. If “Dollar” is not in cell B3 do nothing. Here is my current macro.
View 2 Replies View RelatedContents of Column C may well spread to over 18 characters, but column is formatted to be this wide - therefore if character length exceeds this, the data spills over into the next column. I don't want to use "Wrap Text" as I want to keep all rows the same height. I have toyed with this macro (which I'm sure came off this forum originally)
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Intersect(Target, Range("C5:C2200")) Is Nothing Then
ActiveWindow.Zoom = 90
Else
ActiveWindow.Zoom = 110
End If
End Sub
I quite like this as I can format Column C to "Shrink To Fit" and then read the potentially tiny font by clicking on the cell
What I'd really like though would be to keep the font the standard size for the sheet, but with a click be able to expand the cell to show the contents. I know that a simple cell click will show the contents in the formula bar, but it would be nice to actually work on the cell
On a related topic, again in the interests of neatness, is there any way to stop the "spilling over" of text into (in my case) Column D? This column is empty, and I can achieve my aim by putting a space into the topmost cell and then dragging down, but this seems a little messy!
i am trying to use clearcontents with the below code but i get an error,
With Sheets(1)
With .Range("J7")
.ClearContents Range("J7:J" & .Range("A" & .Rows.Count).End(xlUp).Row)
.Formula = "=H7-I7"
.AutoFill Range("J7:J" & .Range("A" & .Rows.Count).End(xlUp).Row)
End With
End With
I have a column with adresses.
Cell A1 contents Road 12
Cell A2 contents Street 555
Now i want to split the content.
In cell A1 Road and in cell B1 12
In cell A2 Street and in cell B2 555.
Is there a macro that can do that?
I want the function of clear contents to work based on the value of B4. If I run the code with clear content part excel crushes.
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("B4") = "Basic" Then ''*** B4 is adropdown ***''
ActiveSheet.Unprotect
'Range("B10,F10,H10").ClearContents ''*** if I run this part the excel crushes ***'''
Range("B10,F10,H10").Locked = True
[Code] .....
If Cell A1 Contained 1,154,546,487,47,36,48,47,668 and so on. Using a Formula or Macro how can I get it to take each number(s) before each comma and put it in the next column on the same row?
So using the above example numbers you would end up with 1 in column A1 and 154 in column B2 and so on and so forth.
I have a cell that contains values such as "AAPL" or "0001.HK" (without the quotes). I would like to extract the content to the left of "." (if any). i.e. I want the cell to return "aapl" or "0001". What formula should I use?
View 9 Replies View RelatedI want to have a cell that looks at another cell based on a number that is in another cell. So imagine if you will: A1 contains the number 25. A2 contains the formula I can't work out. I want it to look at the row that is the number contained in cell A1, so in this case it would look at row 25.
Now I want to narrow it down further to a cell in that row but this will be a constant so lets say column F. So if A1=25 then A2 would display what ever is in F25. If cell A1 were 16 it would display the contents of F16 etc. The best I got was something like =IF(A1=>1,(F(A1))) but obviously that is wrong as it doesn't work.
I'm trying to work out if there is a way to rearrange the contents of a cell. Basically, I have names in each cell which have surname then first name and I want to have them reversed.
I know it would be easy if they were in seperate cells but unfortunately that's not the case. Is there a way to do it? If it's any help surnames are in upper case and first name in proper case.
I am looking for a way to remove text from a cell if it is 2 characters or less but do nothing if the text is longer than that. Is there a way to do this with either a function or an advanced find?
For more detail, I have a list of middle initials and last names. The cells are either a middle initial by itself like "D." or they are a last name like Jones. I want to go through and delete the cells that have the middle initial and leave the ones with the last name. So if there is a function that will evaluate the cell, and if it is 2 characters or less, then delete the contents. If greater than 3, leave it alone.
About half of the time when I move the contents of a cell I get the message "The Clipboard cannot be emptied. Another program might be using the Clipboard"
View 14 Replies View RelatedHow can I lock the contents of an array so that they won't disappear when using auto-filter. "Freeze Panel" doesn't seem to do the job properly.
View 9 Replies View RelatedI have a range of cell content to be clear (Value only) but no formula in those cell.
The range is populated in cell H106.
Example cell
if cell H106 = D5:E102 then clear the value value only in cell range D5:E102
if cell C106 = G5:H102 then clear the value value only in cell range G5:H102.
Effectively I have a cell that contains the following data :-
63303-9600
63303-5280
63303-9700
What I need to do is loop through this cell and take the first 10 characters and ouput to a row, then take the next 10 characters and output to the next row and so on until it has been through all the cell content.
I think I've had enough of using excel generated macro's as an excuse for decent code. I need to turn this:
Small procedure, function, what have you that will continue this pattern until I hit some kind of indicator to tell it to stop. This just clears the contents from 7 rows, hops down 9 rows and does it again.
