I have drop-down list in cell C4 and inserted Checkbox next to it. Drop-down list has a blank default value. I want Checkbox to be ticked If value in C4 is not blank. My code so far is:
[Code] ......
I attached sample spreadsheet : EF989727_re.xlsm
I need to make sure that two checkbox's are ticked before my macro is run. How do I change this into an "AND" statement?
Sub Email1Macro()
If Sheet1.CheckBox1 = True Then
< my commands here>
Else
MsgBox "You must tick the checkbox before you can continue"
End If
Exit Sub
End Sub
I'm creating a basic form or templateusing Excel 2010 where the user will fill out information (See attached screenshot) I'd like to incorporate two a check boxes, that when ticked, change the display of the second table, either adding, removing or splitting of of the current columns in to two?
Is this, or any variation of, possible using Excel 2010.
I have a spread sheet with various tick boxes, that when ticked calculate an accumulative percentage in a cell. This cell is the basis of my graph.
E.g. if the cell displays 80% - the chart with show 80% - simple.
However, I want to write a vba code that changes the fill colour of the chart depending on the percentage.
i.e. if the percentage data = 0-49% I wish the chart to display as red. 50-69% - yellow and 70%+ = green.
I have been using different keywords to find what I need. I have 3 checkboxes: cash, amex, other. I have a subtotal cell. When the appropriate checkbox is checked, the amount from the subtotal cell will auto go to the cell next to the checkbox. Is this VB?
View 6 Replies View RelatedI have a formula that adds the contents of a row if a box is ticked. It then averages the result. This works fine, but now I only want it to add the contents of every other column before averging it. Can anyone adapt the formula below to allow me to do this?
=SUMIF(E73:P73,TRUE,E9:P9)/MAX(1,COUNTIF(E73:P73,TRUE))
I just recently got my hands on a very complicated excel tool, which I would like to "simplify". Its probably going to take a series of questions but the first one would be:
Imagine a list of written questions in excel. Now I need to insert a checkbox next to every question and the ones that are ticked, should (after clicking an "export" button) export themselves to another excel document.
the code I would need to enable a command button only if any one of 3 checkboxes are ticked?
The command button is cmdenter and the checkboxes are 1, 2 and 3.
If I protect a sheet but tick the boxes to allow sorting and autofilter I still get an erro when I try to use the sort buttons on the autofilter.
It allows me to use the filters but as soon as I sort I get told to unprotect the cells im trying to sort.
Is there a way around this where I can keep formulas from being touched but allow sorting of data through autofilter?
I have a macro that seems to work okay for older versions of Excel - I use Office XP (2002) tell me if this will work for newer versions (2007 / 2010)?
KB1017 - Trust access to VBA project
Code:
Function VBATrusted() As Boolean
On Error Resume Next
VBATrusted = (Application.VBE.VBProjects.Count) > 0
Exit Function
End Function
Private Sub Workbook_Open()
If Not VBATrustedAccess() Then
[code]....
I was thinking that i should probably have
VBATrusted = -1
as the third line so that it is negative unless the tick is there. No way of checking older versions right now though.
married, widows, single checkbox is selected
macro solution
good work.
I have 3 checkboxes; when one is checked, a set/range of rows should be visible. Only 1 checkbox should be checked at a time.
If checkbox 18 is already checked, and checkbox 20 is then checked, I want the first checkbox unchecked and the rows for checkbox hidden.
I'm using the following code. It works great as long as I check and uncheck the same box before attempting to check another box. But if Checkbox18 is already checked with its rows showing, and I then check checkbox20, the checkbox20 sub runs and as I step through, it jumps to sub checkbox18.
How can I stop my subs from jumping from one to another?
Code:
Private Sub CheckBox18_Click()
If CheckBox18.Value = True Then
Worksheets("TRF").Rows("36:41").Hidden = False
Worksheets("TRF").Rows("42:64").Hidden = True
Worksheets("TRF").Rows("65:76").Hidden = True
CheckBox19.Value = False
[Code] .........
How can i hide and unhide one checkbox using another one? Can it be done using IF formula?
And also i am using this checkbox to function something else as TRUE/FALSE.
I have this worksheet with 2 buttons and 2 textboxes.the first button is named search literally to search the items inputted in the textboxes and the second button is clear which clear all the inputted items in the textboxes and the search field. I manage to code those things however I have a main problem. How am I suppose to linked a checkbox with those items?
For example I searched this particular item so the checkbox corresponding to that item must show up in the left most column of it. and if I searched multiple items those checkboxes must show up too. I am having a hard time coding and trying since I am new in vba. I also attached a sample worksheet. I am using excel 2007.
Search.xlsm
I am writing some VBA code in Excel 2007 and am stuck on a property with the standard form check box (not OLEObjects).
I would like to check and find out what the value is of the linked cell for a checkbox...
Like, if a user clicks the checkbox, it changes the linked cell value to true or false... But I cannot figure out how to "lookup" or "go and get" this true or false value through code...
I'm trying to achieve a search of a sheet using a selection in a listbox on my userform and then return a value of 'true or false' to my checkbox.
My code is below;
With Sheets("JobChecklist")
Set r = .Columns("b").Find(Me.ListBox3.Text, , , xlWhole)
If r Is Nothing Then
Exit Sub
End If
ff = r.Address: n = 0
Do
n = n + 1
ReDim Preserve a(1 To 6, 1 To n)
For i = 1 To 3
a(i, n) = r.Offset(0, 1).Value
Next
Set r = .Columns("b").FindNext(r)
Loop Until ff = r.Address
End With
With Me.CheckBox30
If a.Value = True Then
CheckBox30.Value = True
Else
CheckBox30.Value = False
End If
End With
End Sub
I need a checkbox (actually a few but I will use the same code and change the name and cell reference) to do the following
Checkbox in A1 is ON by defaultB1 is 100User can free change the value of B1 when checkbox is onWhen checkbox is OFF"100" (or whatever number entered by the user) gets storedB1 changes to a relatively large number "9999"B1 changes cell color to grey and is locked for editWhen checkbox is ON againThe value stored previous to checkbox turned OFF is restored back to B1B1 changes back to normal cell color (no fill or white)B1 is unlocked and user can edit the cell
I need to be able to select a checkbox on my form and when selected, fill data from other cells on the form to other cells. Here is what I have so far
Sub CheckBox1_Click()
If CheckBox1.Value = True Then
Cell(F13).Value = Cell(B13).Value
Else If CheckBox1.Value = False Then
'do nothing
End If
End Sub
But it does not work I get a compile error on the: Cell(F13).Value = Cell(B13).Value
I have 5 columns in excel and a value in each column, i.e. J23, L23, N23, P23, R23 (I have left columns blank in between each one).
The values in J23, L23, N23, P23, R23 are all different.
I'd like to place a Checkbox underneath each of these cells (each checkbox being specifically for the value in the cell above it) so that when I click one of the checkboxes, the value that is linked to that checkbox is then copied into another sell, for example Cell J31.
I go to last used row for column C and then go to next row column A and insert a check box and link that to same row in z column. The code which I am trying is not working.
lastcell is last used cell in column c. Say C8 (c8,c9 are merged). A to column H are merged.
[Code] .....
I dont know why i am unable to go to A10 with the above code.
and for check box i am try with macro recorder.
[Code] .....
Checkboxes are inserted with every new row. I am able to add row and merge the rows and I am struck at adding checkboxes.
I need to click on a cell and when I click on it, it should change colour and insert a tick (or other symbol).
View 14 Replies View RelatedI need to include in my roster sheet that if a client is "present" my instructor will check the box. This (idealistically) should add +1 on the column labeled "classes attended" in sheet labeled 5 groups. I've been at this for 3 hours and still have gotten NOWHERE
View 5 Replies View Relatedi am working on a spreadsheet that is doing two things 1) its allowing the user to choose between 1 to 3 number or N/A from the list validation option and 2) there is a checkbox if one selects that all the columns that have the formula will become N/A irrespect of data in it.
I am using the following formula in the list validation option
a3 is the check boc
E5 =1
E6= 2
E7 = 3
E8=N/A
=if(a3=true, $E$8, $E$5:$E$8)
The issue I am having with this is, if I start selecting something from the drop down and half way I realize I need to check the box, it will only make it E8 value for the cells I have not touched and the ones I have already selected the drop down value it will remain. However I want it to override the value to E8 irrespect.
I have separate check boxes on cells B12 & B18 respectively (which I have referenced to these cell via the Cell Link feature of "Format Control"). However, when I hide & then unhide rows 13 to 17, the Check box referencing cell B18 jumps to cell B13.
stop a check box from moving from its referenced cell ? I.e. anchor the check box.
Here is what I have so far (debugger highlights my CheckBoxLD.Visable arguments)
Yes, this is an activeX checkbox
Code:
Private Sub Workbook_SheetCalculate(ByVal Sh As Object)
If Worksheets("Dosing").Range("BM21").Value = 0 Then
CheckBoxLD.visable = False
Else: CheckBoxLD.visable = True
End If
End Sub
What I would like to to in Excel:
When I leave the current cell,
1. evaluate the contents of the cell I am leaving (essentially determining if it is empty or not)
2. If it is empty, do nothing
If it is not empty (or maybe if it has a number value in it)
3. Then uncheck a box (a check box form control)
In Access, I would enter code in On Leave property. It would essentially change the value in the text box that would be named or have some other unique method of identifying it.
So I have two issues:
1) In Excel, I do not know to make a macro fire upon leaving a cell
And
2) I do not know how to refer to the properties of a specific check box control. that is, there will be many of them in the spreadsheet and I do not see how to name them. Clicking of properties for the check box gave no hint of it.
I have some code for another project which was using checkboxes to select elements to copy/paste.
However, I need too many checkboxes and I think it is slowing down the run time.
I'm wondering if it's possible to have a cell act as a true/false checkbox?
Then I would just change my code from
if checkbox1.value = true then...
to
if range("A1").value = true then....
I have a worksheet which includes in column A a date in the format dd/mm/yyyy what I would like to do is have a checkbox control on the same row (and this would be the same for all the rows on the this worksheet) and when it is checked it updates the value of a cell on another worksheet within the same workbook with the date from column A. i sort of know how to do it on an individual basis but was wondering what code could be applied to a 'finished editing' button which would then check the state of the checkboxes on the sheet and update the values on the other sheet. I'm afraid my knowledge of VBA is poor when it comes to the logic of things...
View 2 Replies View RelatedI want to add a checkbox that when checked, copies a value (E3) in the row and pastes it into another cell on the same row (G3). I would also like for it to be cleared when unchecked.
View 8 Replies View RelatedI have a lost of questions with a possible yes / no answer that is selected via a checkbox. I now need to change the colour of a specific cell if the number of the answers marked yes is greater than the number of questions answerd no.
E.g.
Question 1)Does 11 come after 10?
Question 2)Does 5 come after 6?
Question 3)Is 20 larger than 15?
I.e. The majority of answers are yes so Sheet1!n4 will be coloured green for example