Assign Keyboard Key To Existing Macro?
Mar 19, 2014
My macro essentially requires a deletion of the entire sheet, so I cannot run it through a button, it'd by definition be deleted. So I was thinking to run this macro through the keyboard, how to assign a keyboard key to existing macro?
View 4 Replies
ADVERTISEMENT
Dec 30, 2008
Some expert users can unhide a sheet in a worksheet which is protected by password. But I don't want to place a button in the worksheet for everyone to see and wonder what it's for. I can record a macro and assign a keyboard shortcut but I can't do it it with existing macros ?
View 3 Replies
View Related
Dec 23, 2009
I'm verrry new to editing VBA code and I've been trying to figure out how to send a column of data ("Min Data" AB3:AB21 from "Sheet1") to a worksheet ("F4" - Min) and sending another column of data ("Max Data" AC3:AC21 from "Sheet1") to a different worksheet ("F4" - Max) by using only the one button ("Record Data" from "Sheet1"
I've been trying to figure out ways to edit the VBA in "Module 1" to make this work
Can anyone help me out here? If what i'm asking for isn't clear enough, just let me know and i'll try to explain in more detail.
View 6 Replies
View Related
Sep 30, 2006
I've created Keyboard Shortcuts to run Macros in "Workbook A". Problem is, if I have "Workbook B" open in the same Excel instance/process as "Workbook A" the Keyboard Shortcuts will run the Macros in "Workbook A".
Is there a way to restrict the Keyboard Shortcuts to only run the Macro if Workbook A is active?
Or is there a way to code the Macro to run its procedures only if Workbook A is active?
View 3 Replies
View Related
May 6, 2007
How can i add a keyboard shortcut in already saved macro. Is there any way to do it or need to write a new macro?
View 2 Replies
View Related
Apr 13, 2014
I have two sheets that contain data and I have to switch between them all the time, and I thought I could make it easy by assigning the "switch" to a macro. I am now looking to assign that macro so a single button, like the "`" key. I have tried various pieces of code but none of them worked.I think something like the below may work but I don't know how to start.
[Code]....
If Sheets("Sheet2") is active, then call switch 1, to switch back.
View 8 Replies
View Related
Jul 24, 2014
I used keypress code in one of forms, after running following command non of my keyboard is working in excel. When I am restarting excel everything is fine. what could be the reason?
View 7 Replies
View Related
Aug 18, 2014
However, I have not been able to find a solution. I created 2 macros that work using the alt+F8 and enter option as well as the run from the macros menu method. Whenever I try to use the keyboard short cut eg. Ctrl+e it will either not do anything or pause and then select every cell. The codes are below:
Sub Macro5()
'
' Macro5 Macro
'
[Code]....
I have tried multiple letter options and have also tried many macros in a new workbook and I cannot get it to run with the keyboard shortcut.
View 10 Replies
View Related
Jul 19, 2006
I would like to replace the keyboard shortcut for the macro dialog box
The standard Alt + F8 is on the right side of the keyboard
I would like somethine of the left side such as Alt + Q
View 3 Replies
View Related
Sep 11, 2006
I written VBA code to create a new sheet and embed a command button on it. I want to assign a macro to this button but when I click on the button the assign macro button is greyed out. I have plenty of macros saved and the VBA code has finished running so why should this be?
View 7 Replies
View Related
Aug 17, 2009
i have the following code for sending a worksheet to a closed workbook
View 14 Replies
View Related
Jul 21, 2009
I would like a to activate a form every time I click in a given cell. how to do this?
View 4 Replies
View Related
Apr 3, 2008
While practicing writing macros and studying the VBA code, I decided to add a button to run the macro, something I've done many times in the past. But the option to associate the new button with any macro doesn't seem to be available.
A. How can I assign a new button to a macro
and
B. How can I make the association in VBA?
View 9 Replies
View Related
Jul 7, 2007
I have several macros where I have assigned keyboard shortcuts, as below. Yet they don't work.
Sub My_FastCleanup()
' My_FastCleanup Macro
' Keyboard Shortcut: Ctrl+Shift+M
-macro stuff-
End Sub
View 9 Replies
View Related
Dec 13, 2007
From the Control Toolbox I click on the command button icon. I positon the mouse where I'd like to place the command button and draw the command button. Then right click to open the drop down menu. A few days ago in the drop down menu I had an option Assign Macro but now I don't have it anymore. How is it possible to assign macros to the command button and even better how can I get the Assign Macro option back in the drop down menu?
View 2 Replies
View Related
Feb 12, 2008
I have designed a functioning userform which transfers the data (limited or complete) into the sheet. Along with the data and at the end of each row it automatically generates 4 checkboxes and links them to 4 offset cells.
This is where I hit a dead end. I am not sure which avenue is suitable or indeed possible. I want to click any checkboxes in the first COLUMN and as a result have it change the complete ROW colorindex of the background. I did achieve this with conditional formatting but it seemed to make the empty sheet bulking when saving and I cannot alter the font size which is another goal on the 3rd column of checkboxes. Am I waffling yet?
The 3rd column checkboxes I want to have the ROW font size drop to 3pt. The 2nd and 4th currently serve no purpose i.e. trigger nothing as a result.
I don’t think I can use the checkbox_click event as the boxes are generated for me so I don’t know which number they will be. The worksheet_change event and calculate event don’t seem to register when the linked cell goes to TRUE or back to FALSE. I tried using FORMS and CONTROLS checkboxes but neither has brought me success.
I was hoping the linkedcell would trigger an event and in turn select and manipulate the entire row in which the linked cell is located….
Due to my limited knowledge the code I have written/adapted to suit my needs may appear a little unorthodox? I hope that in itself is not a problem.
I have not managed to get the Controls Checkboxes to initalise blank. Currently they appear greyed out with a tick but fully usable? Of minor importance.
I can't attach the file because the blank sheet is 4.5MB?? so here is the main body of code from the userform. If you need anything else I will supply as required, however I can't get anyfiles under the attachment maximum of 48.8kb. My jpeg image was 108kb....
View 9 Replies
View Related
Nov 22, 2005
I have to modify 2000 files so I've written a master file that loops through a list, importing modules and forms into the 2000 files it opens and closes. On each file when open it draws a button on worksheet. I then want to assign a macro to the button called "ModifyMenu" . The code for 'Modifymenu' is imported into file_01.xls and is a unique name. It does not exist is master.xls, so no confusion.
The code for assigning the code is as follows :
Windows("file_01.xls").Activate
ActiveSheet.Shapes("Button").Select
or
Workbooks("file_01.xls").Sheets("1 B").Shapes("Button").Select
Then
Selection.OnAction = "ModifyMenu"
(This links to master.xls!ModifyMenu not file_01.xls)
Selection.OnAction = "file_01.xls!ModifyMenu"
(This fails, runtime 1004. 'Unable to set the OnAction property of the button class)
Selection.OnAction = ThisWorkbook.Name & "!ModifyMenu"
(This links to master. MAster is the active code even though 'file_01.xls' is the active worksheet)
Variations on the above seem to result in the same 1004 error or linking back to master regardless of the fact I'm trying to link to file_01.xls.
View 6 Replies
View Related
Dec 3, 2008
i want to know how to assign a macro which will remove and place a number in a certain cell. so if i click and tick the box, then a certain figure will come into a cell(this will be a formulae) and when untick the the number will disappear.
View 4 Replies
View Related
Feb 24, 2013
I have several Activex buttons in sheet "Options" and I would like to automatically assign each button to the same macro "Run_Options", in order to execute the macro "Run_Options" when I do click over any button.
How can I do that with a excel macro?
View 2 Replies
View Related
Oct 22, 2009
I have a start page in the beginning of my excel workbook.
This is where i want to assign a macro to a search button.
I want the macro to search the entire workbook but only in a certain block on each worksheet.
View 9 Replies
View Related
Feb 21, 2009
I have a data input worksheet, which uses the following code to fill in the missing zeros when cells are empty.
View 10 Replies
View Related
Apr 15, 2009
I would like to change an existing Macro……i.e. the current date……which is ,,,,,CNTRL +; …… I want to make it CNTRL + e………..I tried to make my own by running a new macro……but obviously I am doing something bass ackwards…..I tried to look up the current one……that is CNTRL + ; and see how they did it……but couldn’t find that either
View 2 Replies
View Related
Apr 28, 2009
I have a routine that by clicking one button, that calls a macro, that currently opens Excel, or Word, or WordPerfect. The following macro uses a Case Statement looking at what the extension is, such as for Excel . . . xls
I have added a case statement for a shortcut . . . exe
View 4 Replies
View Related
May 31, 2012
I was wondering if there was a macro to add a row to an existing table. The table is on one worksheet and where i wanna enter data is on another.
View 2 Replies
View Related
Jan 8, 2013
User inputs cost in a cell then clicks macro button that will run a macro that ask for a task description. The user inputs the task info that relates to the cost (i.e. weld pipe). This data is stored on a seperate sheet in the corresponding cell (cost is on sheet "hours" and task description is on sheet "task description" both in same cell. This allows a copy of the cost sheet to reflect the task description. I have tried recording macros but can't get anywhere.
View 1 Replies
View Related
May 30, 2014
I created a drop down list (of various Input Groups) and I need to show the selected group's responsibilities on a separate sheet; is there an easy way to do this?
View 2 Replies
View Related
Jun 9, 2013
I want to assign a macro of start time and end time on one button. I tried but its not working..
View 2 Replies
View Related
Oct 7, 2013
I have two files, a workbook and a document, and both are macro-enabled files. The workbook is my main file for my project and the document is my template. The workbook is basically my database with vba program that populate data to Word document. My word document is a template that has macros saved in a module. Aside from populating the data, workbook also create formfields on to the document and assign macro (ExitMacro).
However, i'm getting Run-time error (4210): Bad parameter message when i try to assign the macro to formfields. I noticed that this happened when the macro was saved in the module of the document. The workbook program works fine if the document macro was saved in Normal.dot, which i don't want to do.
View 3 Replies
View Related
Jan 10, 2007
I need a macro that will take a list of 42 names and 27 locations. The names are broken down into group of shifts, 1 shift, 2nd shift and 3rd shift. We need to perform audits on the 27 locations in groups of 2 people at a time. What I'd like is a macro that would take all the names by shift and assign 2 random people to a location. All 27 locations have to be audited each week (safety), and a report filled out and turned into our safety committee. I would like to post the audit sheet with the macro on our shared drive. Can anyone help me with this.
View 9 Replies
View Related
Dec 30, 2008
Created a button in a spreadsheet but cannot activate the shortcut menu that contains "assign macro." Help says select the button, right click on a handle and a shortcut menu appears with "assign macro." Not. I right clicked every handle numerous times and get the regular shortcut menu without the "assign macro" option.
View 9 Replies
View Related