Data:
20 25 a 30 35 b 40 45 c 50 55 d 60 65 e 70 75 f 80 85 g 90 95 h 100 105 i 110 115 j
"20" is cell a1 and "j" is cell c10
my question: how to divide column a and b if column c filled.
I want to calculate how many cells are filled with color, how can
View 3 Replies View RelatedI'm trying to build a invoice template for my business. Trying to make it as simple to use as possible for my staff to input the data. Currently they will manually type in everything but later on I would like to make the spreadsheet have available drop down boxes for the equipment and it will auto fill the hourly rate in.
Right now my main issue is I have the invoice template the way I would like it, but there are only 5 rows in each category. I would like for it to, once the last row in each category is filled, make a new blank row with the exact formatting of the one above it. Then continue to make blank rows if that subsequent row is filled in as well.
Basically, to better describe what I'm looking for, say I have 15 employees on the job and 10 pieces of equipment. I currently only have 5 rows in each category and would like them to expand out automatically without doing a copy rowinsert. It doesn't matter if the page expands to multiple printable pages as long as it doesn't get jarbled in the process.
I am very new to Excel and not even sure if this is possible. I would also need this to carry on with the .xlsm file so that my other employees can use this invoice template on their laptops.
I attached the invoice template I created so what I'm describing can be better understood.
I currently use the following code to insert a specified row within a worksheet.
View 2 Replies View RelatedI have the following code:
Code:
Private Sub hidefixcells_Click()
'Hide the first 4 columns on all worksheets and adjust cells to fit automatically
Sheets("All Employees Annualized").Select
Cells.Select
Cells.EntireColumn.AutoFit
Columns("A:D").Select
Range("D1").Activate
Selection.EntireColumn.Hidden = True
[Code] ........
I want to add a vba to this code that will hide every row from the last filled row down. This will need to be done for sheets 1, 2 and 3. Currently, I am doing it manually, but I am hoping it could be done by code.
I have a spreadsheet that our sales department fills out. They enter a lot of different data in cells all around the sheet which is important information that our production staff and our shipping staff needs, and sometime they fail to enter all of it which leaves questions. I would like to have the screen flash what cells need to be filled in before they save the sheet. Is it possible?
Recently I work on a project involving various formulas and functions in it.
At this moment I am trying to add some option to my file and I will explain briefly.
I intend to include formula which will number the cell in a line (row) when it is filled with some data.
I guess it is connected with array formula and also may be COUNTIF function but could not figure out how to use it.
I will upload a sample file which will show the idea.
Sample file: Number the lines.xlsx
I have data entered in rows 2:10. The amount of data is variable for each row. For example, in row 2, columns A:F are filled out, and the rest (G:P) are blank. In row 3, columns A:J are filled out and K:P are blank. The data is always entered from left to right, and to a maximum up to column P. Hope this makes sense.
In column Q, I want to write a formula that will tell me the last filled column of that row (A=1, B=2, C=3, etc.). So in Q2 would display 6. Row 3 would display 10. And so on.
I've attached a simple spread which gets across the main problem. i need the totals row (currently row 7) to drop down a cell each time the data base above has an extra row added to it its pretty much a cosmetic issue but it can be useful on hugely long spreads.
View 13 Replies View RelatedCoding that it does the cells that have a color attached to it only and not the cells that are clear. Right now it is doing the clear cells only.
[Code] .....
a macro to sum up rows without coloured.That means the total qty from B11 to B17. For your information, the hightlighted rows vary from time to time. Any guide and help is greatly appreciated.Pls refer to my attachment.
View 10 Replies View RelatedI use a macro to copy some data from a .csv file. The data is copied to columns A to H (starting from row 31), the number of rows filled depends on the particular case and is not fixed. The first column gets filled with the serial numbers. the problem is that in the last row cells of columns B to H contain three dashes (---).
I have written a simple code that finds the last filled cells in column A. After having found this row, I would like to clear the cells or delete them. the below mentioned simple code does finds the last filled row but I am not able to find a command to delete or clear the cells of this row.
How to sum cells filled with colour?
When I use the colorfunction it works, but I have changed the cells to have different color based on conditional formatting, and now the colorfunction isn't reading the fill color.
I have a little problem counting filled(numbers,chars, etc) cells i used |:
subtotal with filters , nothing
i used COUNTA, nothing
i used COUNTIF(range,"*"), nothing
is still counting the blanks
I was just wondering if there is a more efficient method. I have a UserForm that requies textboxes to be filled. I have a commandbutton1 on the form called "next" which is only enabled after all the fields have been filled. If any field is blank, I want the commandbutton "next" to be disabled. I have many UserForms so I wanted to see if there is another way than my own primitive method - I have a code for the change event of each textbox
Private Sub TextBox1_Change()
If Me.TextBox1 = "" Or Me.TextBox2 = "" Then
Me.CommandButton1.Enabled = False
Else
Me.CommandButton1.Enabled = True
End If
End Sub
Private Sub TextBox2_Change()
If Me.TextBox2 = "" Or Me.TextBox1 = "" Then
Me.CommandButton1.Enabled = False
Else
Me.CommandButton1.Enabled = True
End If
End Sub
Private Sub UserForm_activate()
Me.CommandButton1.Enabled = False
End Sub
I am counting days until a part is filled, and would like the unused lines to stay blank until a date is entered. below is a pic of my sheet.
I would like the 40034 colum to be blank (colum k) to be blank until there is a date input into colum b (date req)
My formula for colum k is =IF(ISBLANK(A4),TODAY()-B4,A4-B4).
I have this formula:
=DATEDIF(C3,I3,"MD")
However i need that formula to be blank if columns C and I are not filled out yet
I want to create a room reservation sheet, based on the following:
December
Room 1
Room 2
08:00 am
09:00 am
10:00 am
Where the blank cells should be filled with a color (red, blue, anything), based on another sheet that tells me i.e that the room 1 is occupied from 09:00 to 10:00 and room 2 from 08:00 to 09:00 am.
I have two columns that are the same field, both Middle Name. The first column does not have every single row filled and the second column has every row the first column does not have and vice versa. I want to merge them to one filled column.
View 2 Replies View RelatedIs there any way to a column be filled automatically by what is written on others columns.
Example: If one of the cells A2 or B2 and C2 are Nonblank, fills automatically the cell H2 with "ABC2" And If some of the cells D2 and E2 are Nonblank fills the cell H2 with "DE2"
How could i change this formula so
If the previous cell "filled with a number" in column D is equal to C17 Then C18 otherwise c17
This is the formula
This formula is in D38
=IF(DAY(A38)=DAY($C$13),$C$17,)
This formula is in D65
I also need to apply the same to this formula
=IF(MOD(ROW(A38)-MATCH($C$13,A:A),7)=1,$C$17,)
I have a column in excel sheet of more than 1000 different names. I want to add S/o with each name how can I do that ?
View 4 Replies View RelatedI created a lab result page for long term patients. thus, they may have 1 to 1000 lab results. so i need to create an infinite print range, but just printing the filled ones.
Right after column J, print 2nd page if filled, if not, dont. And printing A1:J6 to every page is a good solution to not to lose data in long term.
[URL]
So i have been working on this and i am so close. I need to make it so when you enter c in column J it will delete that row and move it to sheet 2 to the next available row. At this point i have it deleting the row and moving it over but it keeps using the same row and over writing the the lines already there. Here is what i have gotten so far.
[Code] ..........
This thing drives me crazy for the past few days. Please helpI can go to sleep.
I have several columns with numerical data. When certain criteria are met, a person manually makes some of the column fields a green fill color via the color fill button.
Let's say I have data in cells E4 to E14
Below, I have a total field (auto Sum function used to total all),
And, another row with The Colored Green totals.
How do I enter the appropriate code to total only the fields that are green?
I have found some info on verious sites but I have been unsuccesful to implement.
[url]
I attach a sample sheet, I was playing around a bit, you can ignore the fill color red, just deal with the green fields.
write this in VBA on the Workbook Level, "ThisWorkbook" : IF range (B20:B53, E20:E53, H20:H51) are all filled through user keypunched values--checks and coupon amounts.AND range (C20:C52, F20:F52, I20:I50) are equal to = " "
-- these ranges contain formula that spits out values only when there are discrepancies with the manually keypunched values above' otherwise it's equal to " ".THEN call batch02. batch02 is a macro that prints the specified batch.I have attached the filed I am working with. There are 25 batches, hopefully I can replicate the codes by just changing the ranges and the print macro.
Those "False, False, False, False" parameters to run a histogram, whatever do they mean? Application.Run "ATPVBAEN.XLAM!Histogram", Range("Inputs"), Hist.Offset(0, 3), Worksheets("OutputSheet").Range("Outputs"), False, False, False, False
Through recorded code, I've seen that to create a histogram, the third False is a "True"... but let's say I've already got the blank histogram created. I'm running a simulation (where the inputs range is being updated with every run), and I want the histogram to be filled in at the end of all the runs. What do these parameters have to do with it? Having them all as false, like I've been told, isn't working.
I'm looking for a way to ensure that users of a spreadsheet have filled in all required cells. VBA code which will prompt if a cell is blank which will activate on a button click
All cells are 'Named ranges' so hoping there's a way in which I can point to all named ranges and if they're blank display the below error message.
"Please ensure you have filled in all required fields"
I would like to figure out a formula that will calculate what percentage of a column is filled based on the total number of rows.
For instance if I have Column K and that will have delayed savings by sales pursuit, I want to be able to calculate the percentage of what is being delayed from a total number of pursuits (basically the count of rows in column A). Ideally this would be a dynamic range (offset).
Ex. Say I have 25 rows in column A, but I only have 2 rows in column K filled. How can I calculate that there is a 8% (2/25) delay?
I want to copy only the filled cells of a column from Range N20 to N1000 and have the following code but this code copy even the blank cells. All the cells Range N20 to N1010 have formula and dependent on the value of another cell and if another cell is blank than cell in Column N is also blank.
Please suggest the changes in the following code so that only filled cells are copied.
Code:
Dim LstRw As Long, sSaveAsFilePath As String, ws As Worksheet
Application.ScreenUpdating = False
With Sheets("Sheet1")
LstRw = .Cells.Find(What:="*", SearchOrder:=xlRows, SearchDirection:=xlPrevious, LookIn:=xlValues).Row
.Range("N20:N" & LstRw).Copy
End With