Event Macro Error When Selecting More Than One Cell
Nov 13, 2008
I'm using a macro that picks up on changes in a active cell.. This is the code
HTML
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
If Not Application.Intersect(Target, Range("A:A")) Is Nothing Then
If Target.Value <> "" Then
ThisWorkbook.Sheets("Log").Cells(Target.Row, 2).Formula = "=Today()"
End If
End If
End Sub
There's a problem with this code, when select from a range and hit delete, i get a error mismatch. I want to have the macro ignore when i select active cell range of greater then 1.
This should be so simple (I would have thought), but so far I'm struggling.
Using Range / Offset or something similar, I want my macro to select a certain cell (which is dependent on the data in another cell) on my worksheet so that the user can then input data into the chosen cell.
Something along the lines of:
Range("A1").Offset(23 + t4, 1).Select
[where cell t4 contains a number which dictates how many lines down I want it to jump]
The purpose of the excel sheet is hour administration. In the first page you fill in which group it is about, what week it is about and the amount of hours to change.
There are several other sheets named after the group that are filled with some kind of agenda.
An example: I want to make a change to the amount of hours group X will be there in week 3. I fill out the 3 columns (Group, Week, Hours) and hit a button. It should now check those 3 columns for data and modify the hours for the correct group. It is not done yet but I'm running into a problem already, the function I use to find the row with the correct weeknumber in the Group sheet returns wrong numbers and I don't know why.
VB: Private Sub CommandButton2_Click()
Dim Week As Integer Dim WeekRow As Long Dim Groep As String Dim Uur As Integer
[Code] ....
What I am expecting to happen is this: It checks A1, B1 and C1, selects the correct sheet, executes the function FindRowByValue (the week number is in column B) and fills Week Row with the result, then returns to the original sheet, gives a debug message and repeats this 5 times.
The debug message shows that the Week Row is not returning the row with the week number I filled in but instead returns either the week number itself (so if I wanted to find week 5 it returns a 5, while week 5 is in row 28), or a different number that is incorrect.
I have a comparison macro that compares one sheet with the next, it is called sub comp1 (). There is a condition whereby columns must be removed before sub comp1 can run. To remove these columns I run the macro called sub colcut (). What I need is the following action:
If cell BJ4 of current worksheet = "RE COMMENT" then run sub colcut () followed by sub comp1 () otherwise only run sub comp1 (). FYI The macro is to be run manually via a button rather than triggered by the value of the cell.
I have not used an event macro before and am trying to one update a cell when changing a cell. I am basically copying a number to another cell that is an input for a calculation and then returning the calculated value back. How do I reference r69 in the code to start the event macro?
I have looked at a series of Change Event topics and code but can't see what I need. I simply want a macro to run automatically when a cell ....which contains the Maximum time from a range.... changes. I assume I use .... Private Sub Worksheet_Change(ByVal Target As Excel.Range) ...but I have no idea what code to use...
I want to be able to select a cell, for example A10, this would then run a macro that would copy and paste several cells of information along that row and paste it on another worksheet. However, if i then choose a15, a3, a79 in turn (using the control key), it would run the macro using those rows in turn.
i'm looking forward to hearing if and particuliar how this could be achieved.
I have a code and I want to run this macro whan a specific cell change (which has sum formula) and this code also has some calculation. And I m not understanding to overcome this problem through Calculate event.
I was wondering what I can add so this will not error when I delete the contents of the target range,
Private Sub Worksheet_Change(ByVal Target As Excel.Range) If Not Intersect(Target, Range("C11:C29, E11:E29")) Is Nothing Then If Target.Cells.CountLarge > 2 Then Exit Sub Application.EnableEvents = False Target.Value = UCase(Target) end sub
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean) Application. ScreenUpdating=False ' Cancel user prompted save procedure Cancel = True ' Code removed... changes some values and settings before saving ThisWorkbook.Save ' Code removed... return the original values and settings Application.ScreenUpdating=True End Sub
For some reason, the workbook is not being saved when the above code is executed. It seems the problem lies with "ThisWorkbook.Save"... in that it just isn't saving! If I delete "Cancel=True", the workbook will save (obviously!).
I have spent an hour trying to work this out and have come to the conclusion that it is something other than my code... has anyone experienced this problem before?
I'm using the following code in "ThisWorkbook" of a couple of different workbooks, and the problem occurs consistently with the code use regardless of which workbook...
Private Sub Workbook_BeforeClose(Cancel As Boolean) ActiveWorkbook.Close False End Sub
The code itself does exactly as it should (not save changes when closing), but shortly after the workbook has closed, any other open workbooks will freeze, then give a popup message saying an error has occurred and a log is being generated, and EXCEL shuts down (loosing any other work)...
I have searched my HDD and only found 4 .log files that reference dates that coincide with the errors, although the times don't match(?)...
Originally Posted by WinMgmt.log (Fri Oct 27 08:12:29 2006) : core is being shut down by WinMgmt.exe, it returned 0x0
Originally Posted by wmiadap.log (Fri Oct 27 08:17:54 2006) : Performance library winspool.drv will be ignored as it was previously disabled (WbemAdapStatus = -1).
Originally Posted by wbemcore.log (Fri Oct 27 08:47:10 2006) : Core physically unloaded!
Originally Posted by gotomon.log Log file started at Fri, 27 Oct 2006 08:17:46 Eastern Daylight Time 0:00:00 i: G2EnumPortsCore() -- start -- level=1 pPorts=0x0 0:00:00 i: G2EnumPortsCore() buffer available:0 buffer needed:24 0:00:00 i: G2EnumPortsCore() -- leaving early -- 0:00:00 i: G2EnumPortsCore() -- start -- level=1 pPorts=0xc55980 0:00:00 i: G2EnumPortsCore() buffer available:24 buffer needed:24 0:00:00 i: G2EnumPortsCore() -- leave --
I had been using;
Private Sub Workbook_BeforeClose(Cancel As Boolean) ActiveWorkbook.Save True End Sub
Which had the same error... when I changed it to Close, I thought it had been fixed, but it was just that the delay is longer before the freeze.
Have some code in the workbook open event, which when I run when the workbook is already open works fine, however when triggered when the workbook is actually opened it fails on the first line.
Code: Private Sub Workbook_Open() Dim lngLastRow As Long Dim ws1 As Worksheet Dim ws2 As Worksheet Dim ws3 As Worksheet Dim X As Long Dim Y As Long
'Define Worksheet
Set ws1 = Sheets("Sheet1") Set ws2 = Sheets("Sheet2") Set ws3 = Sheets("Sheet3") Sheets("Sheet1").Activate
I have a main workbook that uses a macro to open a workbook provided to me from another department. This workbook contains a sheet that is basically a copy of the sheet in the main document and has the same sheetname and same codename.
The macro should copy the sheet data from the site workbook to the sheet in the main workbook. However, when i tell the workbook to select the sheet in the site file using its codename it errors....
The following code works fine, but when I put the code in an ActiveX Combobox Change Event it gives a run-time error 1004. ("Select Method of Range class failed")The error occurs on the following line
Code: Worksheets("SAVED").Range("A" & l).Select
Code: Dim l As Long Application.ScreenUpdating = False l = Application.WorksheetFunction.Match(Worksheets("DATA").Range("O34"), Worksheets("SAVED").Range("A1:A10000"), 0) Worksheets("SAVED").Activate 'ROSTER=== Worksheets("SAVED").Range("A" & l).Select Selection.Resize(1, 739).Offset(1, 2).Copy
Using Excel 2010. I have a ComboBox (Not ActiveX) on a worksheet
I'm trying to add an event so that when user click on a choice a macro is fired using the selected item as citeria for a filter When I click on the drop down and make a selection I receive this error msg:
Cannot find the macro "cboUserSelection_Change" The macro may not be available in this workbook or all macros may be disabled
I also tried _AfterUpdate - similar error message.
I added the Combo Box code to the Worksheet code, not a standard module
I was able to run a quick test macro so I do not believe "all macros are disabled"
This is my Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("D6:D6000")) Is Nothing Or Intersect(Target, Range("D6:D6000")) = "" Then If Intersect(Target, Range("F6:F6000")) Is Nothing Or Intersect(Target, Range("F6:F3000")) = "" Then If Intersect(Target, Range("I6:I6000")) Is Nothing Or Intersect(Target, Range("I6:I6000")) = "" Then Exit Sub Else
Do Something...... End If End If End If End Sub
when excution comes to this line If Intersect(Target, Range("D6:D6000")) Is Nothing Or Intersect(Target, Range("D6:D6000")) = "" Then
a run time error (91) appears, it tells object variable or with block variable not set.
i have a macro which is executing some cleaning up and then copying information from project sheets to a summary sheet. the individual project sheets are (currently still manually) copied/moved into the big(ger) overview workbook. to support the work with the individual project sheets they contain a macro that is assigned to some (three) shapes. one part of the cleanup is stripping the macros off the individual project sheets:
' remove the traffic-light macros of the project sheets from all sheets in case of unwanted or uncontrolled "infection" For CurrentWS = 1 To SheetCount Worksheets(CurrentWS).Select ActiveSheet.Shapes.SelectAll Selection.OnAction = "" Worksheets(CurrentWS). Range("A1").Select Next CurrentWS
on the line "ActiveSheet.Shapes.SelectAll" i get frequently (not always... ) a run time error '7': out of memory. it happens on at least two computers. i closed all other SW. according to the windows task manager information there should be plenty of memory free.
questions: - how to get rid of the error message? OR: - is there another (more smart) way to strip the ("imported") macros, while keeping the "main" marco alive that does not lead to an error message?
When I paste data in Sheet2 in the attached CF Example2 file (Just by Selecting A1:L18 Cutting it and Pasting in the same place), the action of the VBA code in the Thisworkbook is correct but I am getting the 1004 Error Message from the VBA debugger saying "Run-time Error '1004': Application-defined or object-defined error
I have a macro that checks if a username is in a particular list, and if it is, it unhides certain sheets in the workbook.
The code runs fine if I just run it as a macro or off a command button, but I am trying to execute it when the workbook opens and I keep getting a 57121, Application defined or object defined error.
The code is below;
Private Sub Workbook_Open()
DoEvents
Dim Res1 As VbMsgBoxResult Dim GovRng As Range
For Each GovRng In Sheets("Map").Range("GovernanceMembers") If GovRng.Value = Application.UserName Then Goto 111 Next GovRng
I am using Excel 2007 and the following code is generating an error 1004 (Method 'Range' of object '_Worksheet' failed) on the .Range select line. I am trying to select a bunch of noncontiguous ranges and then format them all at one time.
Code:
With Sheet1 .Range("B9:G9,B10:D11,E10:E11,F10:G11,A13:G13,A14:D20,E14:E20,F14:G20,A22:H22,A23:D24,E23:F24, G23:H24,A26:H26,A27:D28,E27:F28,G27:H28,B30:G30,B31:C32,D31:E32,F31:G32,B34:G34,B35:B36,E35:E36,C35:D36,F35: G36,B38,B39:C40,D39:D40,E39:F40,B42:G42,B43:D50,E43:E50,F43:G50,A52:G52,A53:C54,D53:D54,E53:G54, G61:G62,H65:H66,A56:H56,A57:H60,A61:F62,A64:H64,A65:G66").Select With Selection.Interior .Pattern = xlNone .TintAndShade = 0 .PatternTintAndShade = 0 End With End With
I've written longer lines of code, so I don't think it's a line length issue. Is there a limit to the number of ranges or cells that Excel can select at one time?
I have a command button that runs a save macro to which I added cell validation the message box comes up and what I want it to do is go to the cell that is blank
I'm trying to protect cells based on what's input in column E. Here's what I tried, but it doesn't work. It's giving me a "Type Mismatch" error on the word "Annuity" where it appears first.
I have a cell built into my spreadsheet that serves as an error check (i.e. returns the word 'ERROR' if certain criteria are fulfilled on the spreadsheet). I'm trying to write something into a Macro that will check this cell and not allow it to run if it states ERROR, returning a dialog box to notify this, is this possible?
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
I have a workbook that I am continually adding and removing pages from. The pages are used together in groups of 3 and as a result are named 1.1,1.2,1.3; 2.1,2.2,2.3 and so on. I have a macro that works on sheet 1.3 and now need it to repeat on sheets 2.3, 3.3 etc depending on how many sheets I have open and active in the workbook. Is there anyway that I can create a macro that will work on all sheets that have titles ending in 3 and then end if there are no more? Thus it would work if my workbook goes to either 2.3 or to 7.3 and so on.
I am currently working on a simple macro to help with formatting a spreadsheet. The number of tabs on the spreadsheet will change to reflect the number of companies I'm running reports for. But the same process is to be applied to each tab. The issue I'm facing is I don't know the appropriate code to select all tabs without specifically referencing them.
The code that I would like to apply to all tabs is as follows: ActiveSheet.PageSetup.PrintArea = "$A$1:$J$85" With ActiveSheet.PageSetup .LeftHeader = "" .CenterHeader = "" .RightHeader = "" .LeftFooter = "" .CenterFooter = "" .RightFooter = ""
