I have a column of numbers. (column U)
I have a column with Yes or No (Y/N) (column R)
I want to total up numbers in column U that have a Y in column R.
I can change y/n to 1 or 2 if that is easier (1=yes, 2=no)
I'm trying to convert some data from MLS to make it easier to work with statistically. The raw data regarding Bath count downloads from MLS in 2 columns; 1 column for Full Baths & 1 column for Half Baths (see Raw Data.jpg). I want to concatenate the baths to one column and, if there is a 1/2 bath, tack ".5" to the end of the full bath count.
The problem with my formula is that if it concatenates the ".5" to the full bath count number, it converts the format to text (see Current Formula.jpg). I know I can go through later and convert it back to number format but is there a formula I could use that would keep it in number format?
I have a macro that works but was wondering if there is an easier way to shorten up the part of the code that is very repetitive with an array or ? Nothing I have tried works except the code below.
Code:
Sub ClearAndReset()
Dim WS1 As Worksheet
Set WS1 = ActiveWorkbook.Worksheets("Stocks")
WS1.Unprotect
Application.EnableEvents = False
With WS1
[code]....
I am tasked with putting together an Excel Spreadsheet to analyze our accounts. There are over 80 items for the accounts - about 20 Income and about 60 expenses. These are for various years - actually the last 5 years - by months.
So, I am trying to figure out how the best setup could be done to make this easier for pivot table analysis.
So I have 12 "rows" for each account item for each year.
Maybe I should wait for comments and/or questions before going further.
Just need to figure out how to set up the workbook/worksheet.
I have over 500 labels in a userform and each labels content is gathered from an workbok like this:
Private Sub UserForm_Initialize()
CommandButton3.SetFocus
Application. ScreenUpdating = False
Workbooks.Open "V:allaBeredningSemesterstänging Medleverantörer och Verkstäder.xls"
Sheets("2006").Select
' Sheets(Year(TODAY())).Select
LabelA1 = Range("A1")...............
I have shortened the code and I haven't yet written all labes. The ... is supposed to mean "from" and "to". I don't want to write over 500 lines of the label codes.
So what is an easier way to write it?
I have a situation that I cannot get my hands on. I have a set of Project Numbers in my Column A. (Will Try to post an example).
I need that everytime I change a number in my Column B that it will change all the numbers, in my column B, based on the matching Text in my Column A.
Demo1.xlsm
i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.
The existing code i have is:
Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"
[code].....
I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?
an event macro to change the font colour of a cell whose value changes as a result of a calculation.
View 9 Replies View RelatedI want to change value if i change products from drop down list.....
For more information please find attached file: Book.xlsx‎
I want to drag a formula however i want one of the values of the formula to change and the other not to change. for example:
c1=a1+b1
c2=a1+b2
c3= a1+b3
: : :
how can i make it do this when i drag? a1 is not just a constant and it depends on other parameters.
Attached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.
My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.
Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.
how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?
I'm coding a userform where there are some comboxes which are popolated by values coming from Sheet2. Up to now I work it out (maybe its not elegant but it works).
Now I would like that when the user selects one combobox the values of the other comboboxes are set accordingly to the grid in Sheet2.
Please download the XLS file at: [URL]....
Im trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far
Sub ChangeName()
On Error GoTo errhandler
Sheets(1).Name = Sheets(1).range("d10")
Exit Sub
errhandler:
MsgBox "sheet name is already exists"
End Sub
I have used the below code to insert a new row when the value in coulmn A change. I now need to evolve it so that the new row will contain a specific value depending on the changing value:
Before:
Column A Column B
one test
one test
two test
two test
three test
three test
After:
Column A Column B
one test
one test
Coz two............................
How would I add this formula as a worksheet function with VBA. I can't see INT, MOD or Year in VBA. Also want to change C2 to change to activecell column + row 2.
=INT(((C2-1461)- SUM(MOD( DATE(YEAR(C2-MOD(C2,7)+3),1,2)-1461,{1E+99,7})*{1,-1})+5)/7)
I have a drop down sub pasted to worksheet:
Private Sub ComboBox1_Change()
ComboBox1.List = Array(100, 200, 300, 400)
If Range("I11").Value < Range("N11").Value Then
If Sheets("Profile").Range("K18").Value < ComboBox1.Value Then
Range("I11").Interior.ColorIndex = 2
Else
Range("I11").Interior.ColorIndex = 3
End If
End If
End Sub
I want it to change the cell color on drop down change. How can I modify things to have the change in drop down selection?
I have a simple bit of code that fires some code when it detects a change in cell $P$5 but it doesnt work and I cannot understand why - can anyone assist with this one? I am very green but keen:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$p$5" Then
Range("D9:D81"). AutoFilter Field:=1, Criteria1:="<>"
End If
End Sub
I want to edit a cell's value without changing the formula the cell contains.
View 10 Replies View RelatedI have recorded the code below that does what I need, problem is I will use the code on files with various amounts of rows. What can I change in it so it will work on all different size files.
Code:
Sub Macro3()
'
' Macro3 Macro
[Code]....
Is there a way to either change this so that it lets me to select the whole area or a way to make a macro to do what this does to one cell?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Target, Range("M13:IR458")) Is Nothing Then
Select Case Target.Value
Case "1"
Target.Font.ColorIndex = 20
Target.Interior.ColorIndex = 10
Case "Good"
Target.Font.ColorIndex = 2
Target.Interior.ColorIndex = 35
Case "Stable"
Target.Font.ColorIndex = 2
Target.Interior.ColorIndex = 27......................
=CHOOSE(WEEKDAY("1 Jan " &$C$1),"Sun","Mon","Tue","Wed","Thu","Fri","Sat")
where C1 = the year 2006. B1 has the month Jan and I want to input that into my formula, so when I change the month, it automatically will change my formula. I tried =CHOOSE(WEEKDAY("1 $B$1 " &$C$1),"Sun","Mon","Tue","Wed","Thu","Fri","Sat")
B1 = Jan
C1 = 2006
I am aware that I can use single changing events in worksheet change events. For instance, if column 1, or A is changed, do something. This is only a single If statement, i.e. either the condition is true, or not. What I am not sure is if I can use two changing events, i.e. two conditions. For e.g. I would like if Column A value is X and Column B is "Active", action it, but only if two conditions are true.
For.e,g. The below syntax does not work. If it is only column A, it does work, but I want both A and B to be true, then copy and paste the target does not anything.
VB:
If Target.Column = 1 Then
If Target.Column = 2 Then
If Not Intersect(Target, Range("A2:A" & Rows.Count)) Is Nothing Then
If Not Intersect(Target, Range("B2:B" & Rows.Count)) Is Nothing Then
If Target.Value = "X" And Target.Value = "Active" Then
I have below formula.i need to change the cell address AK in the below formula on the value change in the A3.
=SUMIF(Working!$D$6:$D$3000,Report!B3,Working!$AK$6:$AK$3000)
For example if A3 is having value AZ i need the formula changed automatically as below
=SUMIF(Working!$D$6:$D$3000,Report!B3,Working!$AZ$6:$AZ$3000)
How can I get a cell to show one value when it is selected and return to it's original value when it's no longer the active cell. The cell has a number in it, when it's selected, I use the "selectionChange" event to replace the active cell's value with a number on sheet 2. (The original value is copied to a new location before it is replaced). When the cell is no longer the active cell, I want the original value to be pasted back into the cell. How can I do that? This is what I have so far:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
x = ActiveCell.Row
y = ActiveCell.Column
ActiveCell = Sheets("Sheet").Cells(x,y).offset(20,3)
End Sub
when I select a data validation value in cell A3 of sheet 1 will change the data validation value in A5 of sheet 2, and verse vice.
Also in the same attached file, I want to solve another formar issue. The needs is expained in the file.
If there is a + sign in cell F7 how would I reflect the number in cell G7 to reflect a positive #, and if cell F7 changes to a - sign how would I have cell G7 automatically reflect a negative #?
View 14 Replies View RelatedI need to add a condition to this formula that will change a #ref returned value to a 0 value if no data exists in Raw Data sheet.
=IF(AND('Raw Data'!L2=Variables!$A$3),'Raw Data'!P2,0)
Is there a way to change 126½ which is text to 126.5 as a number?
View 9 Replies View RelatedI have an excel spreadsheet that i need to add rows to. The spreadsheet has many columns and in one of the columns is a date. The spreadsheet is sorted by date. I need to add in a blank row every time there is a change in the date.
For example:
The first 100 rows all have the date of 11/26/2006 then next 87 rows have a date of 12/4/2006 and so on. I would like it to automatically notice a change in the date and add a blank row between the different dates.