I’m working on a macro to clear the contents of all the cells in a certain area of the worksheet that are not locked and do not contain a hyperlink.
(C7 is the first data-entry cell; EndPage1 is a specific cell near the bottom right of the sheet that sets the outside range of the cells to be cleared. This is the code so far:
i have a worksheet which is a form which feeds into another worksheet which acts as a database. i have a button which clears the form based on code which is essentially "clear contents".
the problem is i have a few cells where i would like to retain the formulas. i tried to do this with custom in validation but this did not work. i also tried to enter the code directly into the worksheet but this didnt work either (my skills are limited..). i am avoiding using protect sheet bc that in turn will affect many of my other buttons. is there something i am overlooking?
i have attached a template spreadesheet that 20 people uses everyday. The template works fine but what i would like to do is write a code to clear all the content that manually entered beforeclose. For some reason code is not working properly because when i wrote code to clear the contents the buttons don't work . I also attached the spreadsheet.
View 4 Replies View RelatedI want the function of clear contents to work based on the value of B4. If I run the code with clear content part excel crushes.
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("B4") = "Basic" Then ''*** B4 is adropdown ***''
ActiveSheet.Unprotect
'Range("B10,F10,H10").ClearContents ''*** if I run this part the excel crushes ***'''
Range("B10,F10,H10").Locked = True
[Code] .....
I have a dropdown list in the range E17:E91 containing a list, and two of the values in the list are "DI" and "LTC". What I need to happen is if either of these are selected, the corresponding cell in column F needs to have it's contents cleared. Ex. if in E17 the value is ever either DI or LTC, cell F17 gets contents cleared. if column E contains ANYTHING ELSE, nothing happens. That's all, I've taken care of conditional formatting and data validation already. So even if data is pasted in the worksheet into column E it needs to recognize that and always act in real time.
View 14 Replies View RelatedI'm using a macro to copy the results of a formula and paste the values only on another sheet. The result includes lots of "blank" rows. I have another macro to get rid of the empty rows and move the information up.
It's not working because the "blank" rows aren't empty. Even though I paste values only, experimentation shows that the cells that appear blank return a false to the ISBLANK test with a length of 0.
So now I think I need a macro to run after the pastespecial command to look for cells within a range with a length of zero and delete the contents of those cells, but leave alone anything with a length of >0.
I am brand new to the idea of using VBA, but I have successfully cobbled together some stuff and can usually modify things to work.
It seems I need to maybe use some sort of IF statement along with a LEN and ClearContents. I don't want to delete the blank cells, just make them truly empty so that all of my actual data stays where it should, and my delete empty rows macro works correctly.
I did a search and see some info on clearing contents of columns or rows, or clearing contents based on the content of other columns or rows, but I'm unsure of how to tell it to search each cell within a range and clear the contents of 0-length cells to make them truly empty.
how could i clear repeated cells contents of one column with code suposing that there are some blank cells between the first empty cell and the last?
View 8 Replies View RelatedI'm having a problem in a single line of code in which I'm using a Range Object to essentially select an area of cells whose contents I want cleared.
Here is the
Sheets(Left(c.Value, Len(c.Value) - 1)).Range(Cells(4, 2), " &:& ", Cells(Rows.Count, "b").End(xlUp).Offset(0, 9).Select).ClearContents
I want the range part to evaluate as (b4:whatever the last cell is before the first blank row).
how to clear contents and change colour index of cells.
This is for a booking system. The current VB codes allows bookings to be made by entering a reference number, dates of bookings and room type and bed type. When the VB codes are executed, the cells corresponding to the details entered earlier, would fill the booking table with the reference number and change the colour fill (e.g. yellow) to indicate that the slots are booked. Please refer to attached sample.
However, I do not know how to delete the booking. I would like to assign a cell for user to enter the reference number that needs to be deleted. So when the reference number is entered into that cell, user could execute a function which will clear the contents and change the colour index to none for that particular booking with that reference number(s).
Attached is a sample of the problem.
I am looking for a code that will clear all of my unlocked cell in sheet 1. That is not a problem but since many of the cells are merged I know it keeps throwing me an error saying cannot change contents of merged cells or something like that. Does anyone know how to get around this without unmerging the cells. I saw a code to unmerge all of the cells on a sheet but I really don't want to do this as I already have worked around most of my problems with the merged cells.
View 14 Replies View RelatedI have created a worksheet with many calculations based on user input into several unlocked cells. I would like to create a cell that when selected, would clear the contents of this group of unlocked cells.
View 10 Replies View RelatedI am currently using this Code to search column1 for a Key Word that is entered into textbox "Kunde" on my userform.
[Code] .....
What i would really like to be Abel to do is :
Search for the cell in column1 with =Kunde.Value
Clearcontents of this cell and the 2 adjacent to the right.
i.e. Word is found in A7
Cells A7:C7 contents are cleared and fill Color returned to default colorindex 0
I'm trying to create macro that will clear the contents of the cells in the 4 columns to the left of a cell that = 0 %, as well as the cell that = 0%. For example, if cell F13 = 0 % then the contents of B13:F13 would need to be cleared. The range in which data is being pasted into is B13:F27.
View 4 Replies View RelatedI have a worksheet from which I regularly clear all contents by selecting all the rows and selecting 'Clear Contents' from the right button menu. However, I now have added a formula in Col Y that I want to protect. I know I could select all columns up thru X, but that would clear the R1 headers, so I want to avoid doing that. I can always work around, but I'm curious, is there a way to clear only values and thus protect the formulas when using the Clear Contents command?
I am trying to clear the contents of a range of contiguous cells (containing formula) in Excel 2010 64bit. But it is taking a LONG time (read >30min to clear a range 288 x 100). Originally was doing it in VBA but it was taking too long so I started stepping through the macro and identified that the slow down was occurring on a particular sheet only. So the problem is in Excel....not VBA because it is still very slow when deleting the same range in Excel without using VBA.
I've tried all the usual suspects including: Application.EnableEvents = False (run from the VBA Immediate window when using Excel without VBA), Setting to Example of slow clear contents5.xlsxExample of slow clear contents5.xlsxManual Calculation, Turning off screen updating, deleting all the conditional formatting on the sheet, removing any data validation from the sheet (yes all these at the same time). There are no links to external workbooks. I've even tried in VBA changing from .ClearContents to .Value = vbNullString. All to NO AVAIL! By way of background the file is about 72Mb #.xlsm.
If I try to clear contents of larger ranges on other sheets in the same workbook it is instantaneous. If I copy the problem worksheet off to a new workbook, I can delete the problem range almost instantly. Why deleting a range of cells should take so long! Again to clarify, I am using the terms "delete" and "clear contents" interchangeably, but they both mean "clear contents" (not delete and move up cells). P.S I've also looked into the reported conflict between Excel and Google Desktop Office Add-in (Office Button->Excel Options->Addins->Com Addins and deselect Google Desktop Office Addin) but I didn't have Google Desktop Office Add-in so it isn't that.
I am trying to find something that would allow me to have a spreadsheet clear the contents of a certain cell based on the selection made from a data validation list which resides on the same row. This can best be described with an example.
The user selects anything but " " or "none" from the validation list, which for this example resides in C5, would trigger code to clear the contents, if any, in AA5. If " " or "none" is chosen the value remains.
This capability should be available for each row through 100.
I have written this code to clear the contents of certain cells, lock the content of others and protect the sheet again it works on sheet1 but not on sheet 7. This is suppose to happen when the Print button on my sheet is clicked.
View 4 Replies View RelatedGotta question about destroying the contense of a worksheet. If for instance I got a macro which uses a different source everytime I run it, and this macro gives a result in a result worksheet. How can I possibly delete the contense of the result worksheet automatically before the execution starts? What I mean is: without selecting all the cells and pressing delete or either using a for loop to go through all the worksheet cells. Is there any function which clears the contense of a worksheet? (without deleting the worksheet itself)
View 2 Replies View RelatedI have the following code in a Excel 2003 spreadsheet with hope that I can clear contents of unlocked cells in one excel file from the code stored in another Excel file.
Sub CLEARSJCCOUNT()
'
' CLEARSJCCOUNT Macro
' Macro recorded 02/21/2008 by Steve Keene
'
Windows("copyAUTOCOUNTSHT.xls").Activate
I get the Subscript Out of Range error window when it hits the first line of code.
I've reviewed this via searching for other posts, but none seem to solve the problem directly.
i am trying to use clearcontents with the below code but i get an error,
With Sheets(1)
With .Range("J7")
.ClearContents Range("J7:J" & .Range("A" & .Rows.Count).End(xlUp).Row)
.Formula = "=H7-I7"
.AutoFill Range("J7:J" & .Range("A" & .Rows.Count).End(xlUp).Row)
End With
End With
I am looking for a way to remove text from a cell if it is 2 characters or less but do nothing if the text is longer than that. Is there a way to do this with either a function or an advanced find?
For more detail, I have a list of middle initials and last names. The cells are either a middle initial by itself like "D." or they are a last name like Jones. I want to go through and delete the cells that have the middle initial and leave the ones with the last name. So if there is a function that will evaluate the cell, and if it is 2 characters or less, then delete the contents. If greater than 3, leave it alone.
I have a range of cell content to be clear (Value only) but no formula in those cell.
The range is populated in cell H106.
Example cell
if cell H106 = D5:E102 then clear the value value only in cell range D5:E102
if cell C106 = G5:H102 then clear the value value only in cell range G5:H102.
I think I've had enough of using excel generated macro's as an excuse for decent code. I need to turn this:
Small procedure, function, what have you that will continue this pattern until I hit some kind of indicator to tell it to stop. This just clears the contents from 7 rows, hops down 9 rows and does it again.
I have a monthy activity where I would like to clear the area B13:P42 on various worksheets in the same spreadsheet. Is there an easier way to do this rather than just recording a macro?
View 5 Replies View RelatedI have the following code where I want to clear the cells.
Code:
Workbooks(strOutputFileName).Sheets(2).Activate
Range("F9:F25,C27:E57,F59:F60,J9:J25,G27:I57,J59:J60,N9:N25,K27:M57,N59:N60,R9:R25,O27:Q57,R59:R60").Select
Selection.ClearContents
When I run this code, where it should select G27:I57, it instead selects G27:N57!!!!
When I manually try to select the G27:I57, the selection jumps to the right to N57.
When I use this piece of code on a different worksheet, it works OK!
Macro to clear contents of entire row if any cell in Range A2:A17 is Empty.
View 9 Replies View RelatedI am trying to have a macro clear out the contents of a cell before it quits, the cell contains validation data in the form of a list. My goal is to force the user to choose an option every time before exporting a file, the cell contains what will become a part of the filename. I want to make sure the user, usually me, remembers to change it each time rather than accidentally saving over another filename. I had the following code and kept getting a 400 error (nice and specific)
Code:
ActiveSheet.Range("O3").ClearContents
The only way my macro will run without a 400 error is if that line is commented out. Is there any way to clear out the cell and retain the validation data dropdown list?
i have a vba that clears content from specific cells, hence somehow it also deletes the header as well
This is my code:
Dim LastRow As Long
Sheets("All").Select
LastRow = Range("J" & Rows.Count).End(xlUp).Row
Range("A2:J" & LastRow).ClearContents
Sheets("All").Select
LastRow = Range("AO" & Rows.Count).End(xlUp).Row
Range("AI2:AO" & LastRow).ClearContents
I'm trying to figure out code to have only the contents of cell 'a2' cleared when the contents of cell 'a1' is changed. The issue is that both cells are derived from lists and I don't want the formats cleared.
View 9 Replies View RelatedI dont know how to copy an excel sheet into the question.
But assuming the following text starts at CELL C2 (this is just a section of the workbook)
C D E F G
1x55Correct!
2x55Try Again?
3x55Try Again?
4x55Try Again?
5x55Try Again?
This is a worksheet to test multiplication tables. I am trying to create a macro button to clear the contents of column F, for the kids to start again?