I have the following code in a Excel 2003 spreadsheet with hope that I can clear contents of unlocked cells in one excel file from the code stored in another Excel file.
Sub CLEARSJCCOUNT()
'
' CLEARSJCCOUNT Macro
' Macro recorded 02/21/2008 by Steve Keene
'
Windows("copyAUTOCOUNTSHT.xls").Activate
I get the Subscript Out of Range error window when it hits the first line of code.
I've reviewed this via searching for other posts, but none seem to solve the problem directly.
Gotta question about destroying the contense of a worksheet. If for instance I got a macro which uses a different source everytime I run it, and this macro gives a result in a result worksheet. How can I possibly delete the contense of the result worksheet automatically before the execution starts? What I mean is: without selecting all the cells and pressing delete or either using a for loop to go through all the worksheet cells. Is there any function which clears the contense of a worksheet? (without deleting the worksheet itself)
I’m working on a macro to clear the contents of all the cells in a certain area of the worksheet that are not locked and do not contain a hyperlink.
(C7 is the first data-entry cell; EndPage1 is a specific cell near the bottom right of the sheet that sets the outside range of the cells to be cleared. This is the code so far:
i have a worksheet which is a form which feeds into another worksheet which acts as a database. i have a button which clears the form based on code which is essentially "clear contents".
the problem is i have a few cells where i would like to retain the formulas. i tried to do this with custom in validation but this did not work. i also tried to enter the code directly into the worksheet but this didnt work either (my skills are limited..). i am avoiding using protect sheet bc that in turn will affect many of my other buttons. is there something i am overlooking?
right now i am clearing a worksheet via VBA with the following: Sheet2.Cells.ClearContents
but the problem is if I had 5000 rows on that sheet, then i clear the sheet and perform an action that only displays a hundred rows.... if i then go to that sheet and press ctrl+end, it jumps to row 5000... not row 100.
so its like the original rows weren't completely cleared.
what is the vba code to totally clear a worksheet??
i have attached a template spreadesheet that 20 people uses everyday. The template works fine but what i would like to do is write a code to clear all the content that manually entered beforeclose. For some reason code is not working properly because when i wrote code to clear the contents the buttons don't work . I also attached the spreadsheet.
I need to create a function that by selecting a sheet name in a drop down box it will remove thinformation on the sheet from a consilidated sheet. The consolidation sheet is consolidating data from 30 sheets within the one worksheet
I have a range on worksheet "CONTROL" from S129:S228. There are 100 rows there. I have another range on the active sheet from B17:N116, also 100 rows. If S129 has a value of 1, then I need row 17 on the active sheet to be cleared (columns B-N). And so on all the way to the bottom of the ranges. If it has no value in the cell, then no clearing takes place. So it needs to test the whole range at once. I really have no clue what the variants and ranges should be, and have NO CLUE how to define a variable range so that I can use the value that R is on in the testing cycle to tell the active sheet which row to delete.
I have a workbook with 100 tabs and I have an index page with checkboxes for each tab. I need a macro that will clear all of the checkboxes on the page with one button and a separate macro that will print only the checked tabs.
Can anyone write that code for me so I can just add it into my index tab?
I need to start with a worksheet without any objects, namely pictures. Without knowing the name of the object, is there a way to clear all objects on a worksheet?
Second: on a different worksheet there are products with pictures with the product number. When a user selects the product number I want to copy that picture and copy it to J42 of the first sheet. My issue is positioning the picture.
I am looking for a code that will clear all of my unlocked cell in sheet 1. That is not a problem but since many of the cells are merged I know it keeps throwing me an error saying cannot change contents of merged cells or something like that. Does anyone know how to get around this without unmerging the cells. I saw a code to unmerge all of the cells on a sheet but I really don't want to do this as I already have worked around most of my problems with the merged cells.
Macro to clear cells with numbers but no cells with formulas with in this macro:
Dim i As Long i = Range("E3") If i > 0 Then ' Copy range Range(Cells(6, 10 + i), Cells(500, 17)).Copy Range(Cells(6, 10), Cells(500, 17)).Select ' Paste special ActiveSheet.PasteSpecial Format:=2, Link:=1, _ DisplayAsIcon:=False, IconFileName:=False ' Clear i columns on the right Range(Cells(6, 18 - i), Cells(500, 17)).ClearContents End If End Sub
The range is where the cells with numbers need to be cleared but not the ones with formulas.
I have written this code to clear the contents of certain cells, lock the content of others and protect the sheet again it works on sheet1 but not on sheet 7. This is suppose to happen when the Print button on my sheet is clicked.
how do i create a formula or macro that will: Clear the contents of Cell C1 If Both Cell A1 And B1 Are Filled. I will need to check all the cells in column A,B and C.
I am getting a #VALUE! error in one of my cells. I know it is because my worksheet is missing information to complete the formula. The information will be inputted periodically in the worksheet (lets call it worksheet number one). But, I have the results of cells in worksheet one that are tied to worksheet number two. Worksheet number two is getting the #VALUE! also until worksheet number one is completed (periodically).
But, in worksheet number two, I have an auto sum that adds up the results from worksheet one so I am getting the same #VALUE! error on the auto sum because only a few worksheet from worksheet one are complete. Is there anyway to clear the #VALUE! and get a number in the auto sum even if only a few worksheets from worksheet number one are inputted?
I need to clear all cells in a column that have a particular value. The value is sometimes a constant like "0" (zero) and sometimes is a value based on a formula. Is there a VBA code that will allow me to select those cells in column matching a particular value and clear them?
I want the function of clear contents to work based on the value of B4. If I run the code with clear content part excel crushes.
VB:
Private Sub Worksheet_Change(ByVal Target As Range) If Range("B4") = "Basic" Then ''*** B4 is adropdown ***'' ActiveSheet.Unprotect 'Range("B10,F10,H10").ClearContents ''*** if I run this part the excel crushes ***''' Range("B10,F10,H10").Locked = True
I have a spreadsheet with a large table of data (values only no formulas). Whoever programmed it, they decided that cells with irrelevant entries should display three dots, i.e. "...". Problem is now need to clear these cells (so they are truly blank) but some of them have been auto-corrected in to ellipses and some have not. I wrote the following code:
[Code] .....
This is fine for the three dots that are just three dots, but for the ones that were auto-corrected to ellipses it doesn't work. How do I amend the code so that it clears the cells that are three dots and the ellipses too?
I have a button, and I need a Macro that will cause it to clear all unprotected cells. I think I can figure out how to get it to clear an individual cell, and I suppose I could enter every cell I want cleared individually...but that might take awhile.
Is there a way to set up a Macro that will delete the contents of every unprotected cell? I guess I haven't tried it yet - if I protect the cells, will it not delete those? Also, there is a small image - I don't want that deleted either.
I have a spreadsheet that has merged cells on that is typed into.
I have a Macro that pulls the information into another sheet and then it tries to clear the cells for the next person to fill in. The issue I am having is that i cant clear the merged cell. I have tried the following code
I have data in columns a,b,c and d from row 1 to about 200 right now. Every week another 9 rows are added. I wanted to create a macro that will delete the last 9 entries in each column.
I have a spreadsheet wherein the defined data input cells are formatted using styles, i.e. data input style. I would like to know how to select all cells formatted with that style within a spreadsheet (whether worksheets are visible, hidden or very hidden) and delete the contents of those cells while still keeping the cell style.
Am looking for routine that can be used to delete the contents of cells from multiple, non-contiguous cells throughout a single worksheet. I would like to place a "button" or some form of toggle-switch on the worksheet that will clear all entries at once. I see a thread "Macro Deleting Wrong Cells" that references a VBA sub-routine called "DelCells". I happen to be running Excel 2007 and am still adjusting to the new menu "structure" :-)
In Column C, I have a variable range (usually like, C5:C100000) that has data validation in it. However, only about 10% of the cells have a value from that data validation list in them (which is what I want). I'd like to write a macro that only cleared out the cells with no value in them, so that they no longer had any data validation in them. Is this possible?
I have several cells on a worksheet which contain data validation and force the user to select from a list, and several other cells with free user input. I want to use a macro to clear all data, and return the cells containing data validation to blank. (I have a blnak row at the top of all my lists, so there is a selection for "blank".)
I have no problem clearing the cells requiring user input, but my recorded macro would not select the cells with validation and return them to blank.
The first cell containing validation that I need to clear is M39. I have my code listed below for clearing the other cells. If I could get a clue on how to return M39 to blank, I could figure out the rest of the cells.
I have a dropdown list in the range E17:E91 containing a list, and two of the values in the list are "DI" and "LTC". What I need to happen is if either of these are selected, the corresponding cell in column F needs to have it's contents cleared. Ex. if in E17 the value is ever either DI or LTC, cell F17 gets contents cleared. if column E contains ANYTHING ELSE, nothing happens. That's all, I've taken care of conditional formatting and data validation already. So even if data is pasted in the worksheet into column E it needs to recognize that and always act in real time.
