I have a macro that runs and I want it to close excel when it is done. The best I can do is to get it to close the worksheet and workbook.
What is the code to make excel completely close?
I know this is the code to close a workbook
View 5 Replies View RelatedI have a workbook which should only be used between certain dates
In this example between 3rd March 2013 and the 1st March 2014
Would it be possible that if the user opens the workbook outside of this date range an error message could appear then the workbook would then close ?
I want code to:
Open EstimatingSheet.xls
SaveAs current workbook as Range B13 &".xls"
Open EstimatingSheet.xls workbook from somewhere on C:
Then close the one with B13.xls
I am using Excel 2003.
It’s been working perfectly up until around an hour ago. However, now when I close Excel, I get compile errors.
These compile errors seem to be because Excel is trying to access controls in the workbook after it has closed. Since the workbook is closed, VBA can no longer ‘see’ the controls, and therefore it thows up errors.
I’m also getting a similar error on a Worksheets("DataExplorer").unprotect line, which seems to be because the worksheet isn’t there after closing.
These errors only occur when I close the whole excel application using the big cross in the top right. If I just close the workbook (using the smaller cross just below the big cross in the top right of excel), it doesn’t throw up these errors.
Just to clarify: all of the code runs perfectly when Excel is open. The errors are being thrown up for lines of code which run without problem until Excel is closed.
I'm using the following VBA code that highlights a selected cell or range of cells when selected (to more easily see what cells I've selected).
[Code] .......
I'd like to use this code on every worksheet within every workbook that I open. Right now I've only inserted the code in "This Worksheet" in a single workbook and that's the only place it works. I tried creating an Add In with the code so that it worked in all workbooks, but it doesn't work.
I use a workbook where new worksheet tabs are added and removed daily. Every day I use the second-to-last tab (2nd from the right) and the last tab (far right). What code would enable me to activate and reference both of these tabs individually? I believe it would be something like the code below but I can't figure it out...
View 5 Replies View RelatedI need a code to be applied to a VB button that will email out a selected worksheet within the workbook, lets say i need to email out sheet5. Is it possible when the button is clicked to bring up my email client, (it's not Outlook) with the file already attached so i just need to add the email address/adresses?
View 9 Replies View RelatedHere is the code I have:
Windows("2.xlsm").Activate
Sheets("Report_P").Select
Sheets("Report_P").Copy After:=Workbooks("New_report.xlsx").Sheets(9)
2.xlsm is open. it contains a sheet called Report_P New_report.xlsx is open and has 9 existing sheets
Every time this tries to execute I get a "Run time error 1004 Copy Method of Worksheet Failed".
What is wrong with this code? I have an identical line in another macro, the only difference is that there are 5 sheets pre-existing, and that works fine.
I have data that daily needs to be refreshed and printed to pdf.
I figure the simplest way to do this would be to task schedule the workbook to open daily. Then on open it will refresh the data, print it after all data has been refreshed and close the workbook.
I set it up originally without the need to print so I have all the queries set to refresh when opening the file, however when I now try and put the code to print to pdf on the workbook open event it runs before the queries are finished running. (Query notes: queries were created through Microsoft query, and are accessing a MySQL database queries set to refresh when opening the file queries set to enable background refresh).
I have a Macro that is stored in a specific workbook,"Projection Modeler.xls" the last line performed in this macro is the close workbooks without saving chages(this needs to be done due to the way this macro was written, and it would take too long to rewrite). If I would then like to reopen this workbook, and then rerun this macro, can I do this from inside the current macro (in a new sub routine, for instance), or do I have to write a macro outside of the workbook and then open the workbook and call the routine?
View 4 Replies View RelatedI cannot make this work in XL2010.
I am opening a second workbook in ReadOnly in the Workbook Open and Closing it in the Workbook BeforeClose.
I don't EVER want to save changes on either workbook.
I need to leave excel open as the macro created a 3rd workbook which the user will need.
[Code]....
I have a very brief question
dlgAnswer = Application.Dialogs(xlDialogOpen).Show
Selection.Copy
Windows("Derivative YK pricing Mod G.xls").Activate
Columns("B:B").Select
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats, Operation:= _
xlNone, SkipBlanks:=False, Transpose:=False
Range("C5").Select
Application.CutCopyMode = False
Windows("EXPORT1.xls").Activate
ActiveWindow.Close
As you can see, I open a workbook with the dlgAnswer, I was wondering how I could close that opened workbook
Currently I have
Windows("EXPORT1.xls").Activate
ActiveWindow.Close
however the workbook will not always be called export1.xls, I want it to close whichever one I opened earlier.
I wanted to know if there is any way possible to get vba to insert a formula in a cell to each worksheet in each workbook in a folder and then using loop to extract all the info from each worksheet of each workbook in same folder into a master workbook?
View 1 Replies View RelatedI snagged this code out from another project I wrote, and it works fine in that one, but doesn't in the new project.
What I want, is when the person presses the exit button, it will save whatever was done, its running as a form printer and database. The code below is the code for my exit button.
Private Sub CommandButton4_Click()
Dim sAnswer As String
Dim i As Integer
' ****************
' ** Exit Button**
' ****************
When it gets to "If ActiveWorkbook.Saved = False Then" it does put the question out "Do you want to save changes" I click Yes and it doesn't save it.. I have tried both activeworkbook and thisworkbook ... I copied the code and verified all is good to go..
I can save and create pdf, I just need help deleting the .xls file.
Her is code I have:
ActiveWorkbook.Save
Path = "C:Emailed Proposals"
On Error Resume Next
ActiveWorkbook.SaveAs Filename:= _
Path & Range("C6").Value & Range("O3").Value & ".xls"
On Error GoTo 0
Application.ActivePrinter = "PrimoPDF on Ne00:"
ActiveWindow.SelectedSheets.PrintOut Copies:=1, ActivePrinter:= _
"PrimoPDF on Ne00:", Collate:=True
Application.ActivePrinter = "EPSON Stylus C86 Series on Ne02:"
I need to keep the newly created .pdf and delete the created/saved .xls file, I just can't ssem to figure out what I need to write in code.
I have a template where users provide input in specified fields. Upon completion, pressing a macro button emails the file to administrator.
find out a code that once email is sent, perform following actions simultaneously;
Pop up message to appear as “Message Sent – Do you want to process another request?
If reply is Yes, the sheet is refreshed
If reply is No, File is closed without Saving
The code below works perfectly when run from a macro button on a worksheet or when initiated using the VBA run option in the VBA editor but it does not run when run from a command button on a userform. The code is
Sub closer()
Dim bCancel As Boolean
Do Until bCancel = True
bCancel = Application.Dialogs(xlDialogSaveAs).Show
If bCancel = False Then MsgBox "Sorry, cannot Cancel", vbCritical
Loop
ActiveWorkbook.Close SaveChanges:=False
End Sub
When I run the code from a command button on my userform the error message I get is: 'Run-Time error 1004 Document not saved' and the line of code that it continually gets stuck on is: bCancel = Application.Dialogs(xlDialogSaveAs).Show
Close worksheet with VBA. Can this be none?
View 2 Replies View RelatedHow can i save and close one workbook in excel with vba code.
View 2 Replies View RelatedHow can I make one workbook close another without saving?
These all work in the immediate window, but not in the
Private Sub Workbook_BeforeClose
I have the below code in a macro attached to a button. Basically, if i choose yes to the message box at the beginning then the macro copies the all the cells on the sheet 'selections', opens up a new workbook, pastes into here, deletes some unused cells, rows and columns, then sends the sheet as an attachment on an e-mail.
What i also need to do is when i have sent the e-mail, the macro closes the new workbook without saving changes.
I have a workbook that contains 4 macros. This workbook is copied by vb.net application with another name. When I run the macro in the copied worksheet, the Original file/workbook is opened automatically, and it is open until the copied workbook is closed.
My question:
1) Is this normal, when a copied workbook invokes a macro from the original workbook, the original workbook opens?
2) Is it possible to close the original workbook while executing the macro from the copied workbook?
3) Will that affect the macro in the copied workbook?
4) If possible to close the original workbook, kindly help me with the code.
I somehow need to add to the section of code below a event to have the "(Public)Archive.xls" to automatically close 15 minutes without saving everytime it is opened.
Code:
Kill "H:AllMaterial Prep Archive(Public)Archive.xls"
Columns("A:H").Select
Selection.Copy
[Code].....
I have a sheet that on open looks at the username and determines which tabs can be seen by that user. If macro's are not enabled, I want the sheet to just display sheet 4.
here is the code I have on open that works fine: -
Private Sub Workbook_Open()
If Environ("username") = "Bob" Then
Sheets("Sheet1").Visible = True
Sheets("Sheet2").Visible = False
Sheets("Sheet3").Visible = False
Sheets("Sheet4").Visible = False
Else
Sheets("Sheet1").Visible = False
Sheets("Sheet2").Visible = False
Sheets("Sheet3").Visible = False
Sheets("Sheet4").Visible = True
End If
End Sub
I have a Workbook_BeforeClose() function that does not, and I am stuck as to why!
Here it is: -
Private Sub Workbook_BeforeClose()
If Environ("username") = "Bob" Then
Sheets("Sheet1").Visible = False
Sheets("Sheet2").Visible = False
Sheets("Sheet3").Visible = False
Sheets("Sheet4").Visible = True
ThisWorkbook.Save
Else
Sheets("Sheet1").Visible = False
Sheets("Sheet2").Visible = False
Sheets("Sheet3").Visible = False
Sheets("Sheet4").Visible = True
End If
End Sub
So basically after "Bob" is done it will save the sheet with only tab 4 visable. This means that if someone without Macros enabled opens the sheet they can only view tab 4 (I know it isn't password protected in this example, but it will be)
Is there anyway that a workbook can be set up to close itself at a set time i.e 19.00hrs every day?
is it possible to have a messagebox activate when closing a workbook.
View 9 Replies View RelatedOne of my computers pulls info from my cash register once everyday (sales info). Then I have a excel monthly sales sheet that pulls the info from the register info and puts it in the right places. So the computer pulls the register info at 9:20pm everyday, then I have my task manager open excel at 9:25 everyday and it has a workbook open macro to automatically pull the info into the excel spreadsheet. Here's my problem-- I need to close it.
I'm sure I could use a workbook close macro, but when it tries to close it won't it come up with a save, don't save, cancel prompt? Nobody will be there to hit SAVE so it won't close? Is there just a macro that could save it then close it?
I have an Excel workbook that runs some code in the back. When I close the workbook file it seems to close OK. However if I then open the VBA editor window I still see the file in the project explorer. If I re-open and then close I have 2 instances in the project explorer... and so on. I have tried setting all objects to nothing etc. but the problem still manifests itself.
View 4 Replies View RelatedI have a piece code that allows the user to pick a file from a folder on my C:. It then copies a range of data into the original workbook that the macro was run. I would like to close the other file down automatically which shouldn't be that hard but I can't work out how to do it.
View 9 Replies View Related