I have attached a small file with a very simple conditional formatting formula used to turn a block of cells green.
However, the formula does not seem to work properly as it only turns half of the cells green. Columns B1 to B18 are also supposed to turn green, but instead remain clear.
Excel 2002
I have a simple spreadsheet and am trying to get some Conditional Formatting to work.
Cell1 = Name
Cell2 = 1
Cell3 = 2
Cell4 = 3
If cells 2, 3, and 4 all match I want the background in cell 1 to change to green.
I've tried (Formula Is =B1=C1=D1 green) with no luck.
I have a formula in A56 that adds cells A1:A54. I want to use conditional formatting to highlight A56 if any of the cells in A1:A54 are blank. I am unsure how to do this.
View 3 Replies View Relatedcan I set a cell in excel so that if a number in a different cell is above a certain number it will turn green and another cell to turn red. I have attached the file.
View 4 Replies View RelatedSee attached document. In cell G4 i need a format which will make the cell green, amber or red depending on the values in Cells I7 to I9.
3 Greens = Cell G4 to be green
2 Greens, 1 Amber = Cell G4 to be amber
2 Greens, 1 Red = Cell G4 to be red
Ceck this attached file and let me knw what i did mistake in Conditional Formatting
=E2="we have more than 90 days" i like to fill green colors in e2 cell
=E2="we have less than 90 days" i like to fill red color in e2 cell
but its only showing green and white..
I have five columns D3 to H3 all with different amounts/currency value. I'm looking to get a formula or use conditional formatting to scan those five cells and highlight one of them green when Excel has determined which one is the cheapest out of the five.
View 14 Replies View RelatedIn a column in my spreadsheet i have to input a number; either: 51-61 and next to it is either m or o. so in Column A row 1 : 51m, Column A row 2 60m, etc Example:
51m
51o
55o
60m
I want to conditionally format this such that for 51 it turns the cell background green, for 52 red, 53 orange,etc. with a number having a specific color associated with it. 03' does not have a text choice.
I have a color change alert in a cell using Conditional Formatting. Is there a formula that will turn off the alert in that cell once a value, (any value), is entered into the cell?
I want the start and end times of the shift to turn black or red depending on whether the adjacent cell says "off" of "Hol" respectively. I have this working except for when I actually enter smething into these cell ie a shift, the cell turns black.
View 4 Replies View RelatedI am trying to work with conditional formatting to turn a field a specific color based on two conditions, one of which is variable. The first condition is a list of ongoing events (which can change) and the second condition is a set of known milestones. I want to create a control (check boxes?) that will turn a given field (which has dates in it from another calculation) to either Red, Yellow, or Green.
I was thinking two Dropdown boxes - one for the events and one for the milestones. The user would choose an event, choose the milestone, then choose a checkbox or something to change the color of a field elsewhere in the spreadsheet. Right now, I'm doing this in a very clumsy way by having three checkboxes for each milestone for each event. There are five milestones per event (so 15 checkboxes per event on Sheet2). I will likely have 70+ events so I was hoping for a better way to do this. I've done this for the first three events and need a more efficient way of doing this.
See the attachment : Event Milestones based on Go Date Uploadable.xlsx‎
How can you use VBA code to turn off the annoying "Stop if True" default setting when doing conditional formatting in excel 2007? Right now when you have multiple conditional formatting conditions in a cell, it stops checking and formatting other conditions if one of those conditions is satisfied. I don't why they set this as the default...
I have conditional formatting rules set up using excel 2003. The file is opened in 2007 with the above-mentioned default setting that screws up all my conditional rules.
I have a workbook (see attached) that has 2 sheets, Work and Holiday. I want to be able to enter a persons initials into the wrksheet 'Work' for each day of the week.
If that person is listed on the holiday sheet for that day as 'A' then the cell in 'Work' is coloured Red, if not then it is coloured Green. I have tried to get this to work using a defined list and various IF statements but all to no avail.
I've set a conditional format to flag the row green if cell e2 has a Y or a N in the cell.
Currently i have the following conditional format formula is as
=IF($E$2="y",TRUE,FALSE) this is set to change row to green
=IF($E$2="n",TRUE,FALSE) this is set to change row to red
My Questions =
What i want to do is copy this formula through the 500 or so rows and have the formula adust to
=IF($E$3="y",TRUE,FALSE) For row 3
=IF($E$4="y",TRUE,FALSE) for row 4
=IF($E$5="y",TRUE,FALSE) for row 5
Ect.
I've tried using the formate painter but all it does is set all row to conditionally format dependant on what is in Cell E2. Thoughts on how to copy this formula is conditional format so i don't have to manually adjust it line by line. Doing this 500 times over would be a pain.
I am trying to conditionally format some data in cells A3:A6 (shade the cells) depending on whether a number in B1 is 1 (green), 2 or 3 (blue), or 4 (red).
View 3 Replies View RelatedI have the folowing criteria :
1) If “Completed" , then highlight as green
2) If “Pending” , then highlight as red
3) If “In Progress” , then highlight as blue
4) If “X Required” , then highlight as green
I need to include in the third conditional formatting box that if the cell populates "Completed" or "X Required", then highlight as green. Is there a formula I can use in the conditional formatting box ? I am using Excel 2000.
I need a formula for conditional formatting which highlights a row if A has the text "Ex" and B has "Paid".
View 2 Replies View RelatedI need conditional formatting formula that evaluates the values in a row of cells (7 total columns) and counts the number of entries that are 30 or greater. If there are at least three, then I need to apply formatting.
I just can't get the formula right:
Code:
=(COUNTIF(B7:H7,
I need to be able to get a macro to do this. I recorded the macro. The conditional worked, but when I cleared it and then ran the macro, it highlighted all of the wrong stuff. Here is what I want to do: In column(AJ) I have cities with Prefixes or not In another column (AV) I have Criteria1 and in yet another, I have criteria2 (CB)
City
(AJ) Criteria1 Criteria2
SCRNRTH_SCRM1 FALSETRUE should fail test
A9_SCRNRTH_SCRM1FALSETRUE
A9_SCRNRTH_SCRM1FALSETRUE
A9_SCRNRTH_SCRM1FALSEFALSE should fail test
SCRNRTH_SCRM1 TRUETRUE should fail test
A9_SCRNRTH_SCRM1FALSETRUE
SCRNRTH_SCRM1 FALSEFALSE
A9_SCRNRTH_SCRM1FALSEFALSE should fail test
A9_SCRNRTH_SCRM1FALSEFALSE should fail test
A9_SCRNRTH_SCRM1TRUETRUE should fail test
A9_SCRNRTH_SCRM1FALSETRUE....................
I am attempting to create a ROI calculator for my place of work. I want a blank cell to fill in green or red based a cell below it being equal or greater than 5.0%. What is the Macro or equation to do that?
View 5 Replies View RelatedI have a spreadsheet filled with formulas that depend on a value being entered into A2, A3, A4, etc... So column A starting at A2 is where I will manually input a number and the formulas I have in columns B, C, and D will import information from another sheet based off what is put in column A. In column D the formula I have to import data
is =IFERROR(VLOOKUP(A2,Master!C:M,11,0),"").
This will import another number. Additionally in column D, I have conditional formatting that will return a red, yellow or green light based off the rule I have in place. Everything works fine, the only problem is that column D has a green light all the way down even without a value being placed in column A. I would like to find out a way to keep the cells in column D blank until a value is entered in column A. Also, if I go back and delete the value in column A, I would like the corresponding cell in column D to go back to blank as well.
how to apply conditional formatting via VBA to a range of cells based on input from another range of cells. Obviously this would be easy in Excel 2010, but I'm still using 2003 at the office and it needs to stay in this format to be readable by other users:
For cells M8:EK8, my conditional formatting
condition 2: Formula Is =AND($E$8>=M2,(($E$8-$D$8)>=(N2-$M$2))), color index is 40
condition 3: Formula Is =AND($F$8<=M2,$G$8>=M2), color index is 39
I want to add:
condition 4: Formula Is =AND($H$8<=M2,$I$8>=M2), color index is 40
condition 5: Formula Is =AND($J$8<=M2,$K$8>=M2), color index is 39
and so on
The cells in the range M8:EK8 are blank, they only get colored based on input added to D8 to K8. If there is no input, then the cells should be uncolored.
resource tracking ex.jpg
A little background on what i am doing. I have a spreadsheet that tracks when i have blown the dust out of our computers. I have set up conditional formatting so that the text turns red after 300 days and the cell turns yellow after 600 days. However, some computers are in high dust environments. I would like the spreadsheet to tell me to blow the dust out of these sooner. see the attached sheet.
dust 1.xlsx
I have a list in column A of percentages (to 4 decimals 0.0013) i need to conditional format the list so that it shows the lowest percentage in 'green' and the highest in 'red'.
View 5 Replies View RelatedI need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies View RelatedWorking in Excel 2007. I am using excel for a data log (basically) and want it to format all empty cells in a row yellow if there is data in column A
Basically, If i have a value in A2, I want any empty cell between B2-G2 to be filled in yellow (as an idicator to the inputter that the cell needs to be completed).
there is already conditional formatting on these cells, which i want to maintain for the non-empty cells. I also have "0" as a value, so I couldn't use the basic conditional formatting setting it =0, it highlighted cells with $0.00, which i do not want.
Is there a way to set up a conditional format for several cells so that the cells are filled in with red until the user enters text in those cells??
View 5 Replies View RelatedWhat I am looking to do is;
If cell A2 = "Closed"
then I want cells B2 and C2 to strike through its own text.
I.E.
A2= anything other than "Closed"
then B2 and C2 = Blah blah blah
but if
A2 = Closed
then B2 and C2 = Blah blah blah
Have 2 conditional formattings going on in a database query and need to apply two more conditions but only have 1 conditional formatting left. I am trying to highlight everything in a row that contains either "HCAT" or "HCAL" in column D. So far I have this,
=$D2=OR(HCAT,HCAL)
but its not highlighting anything, any clues?
I simply need to have column A be red if value is < Column B value and green if it is >. The problem is that if the value in column A is .00000004 and column B is .00000005, it turns red. Example is the first three numbers below the headers....they each are 0%, yet the value on the left turns red because it is .0000005 more than the value on the right. I just want the colors to reflect the numbers which show up as below. Is there a way to do this?
2011 % of PDD
2011 % of Total $
0%
0%
0%
0%
0%
0%
[code].....