i am using excel 2007. can you use multiple options within a conditional format without having multiple conditional formatting. i know that you can use "or" within a function string, is it possible within the conditional formatting
View 6 RepliesI'm trying to make a spreadsheet where in a column (Column B) you enter a value from 1 to 5 and then depending on the value the cell would turn red (1), yellow (2), green(3), blue (4) or grey(5). I had used conditional formatting for this type of function before but Excel 2003 only gives the option of three possible conditions on any given cell. I could give up one color (grey) and limit the number to four options, but it still is one more option than allowed.
I'm trying to set up conditional formatting to show when an employee is both scheduled to be working for the current date, and is trained in a particular task.
I have a spreadsheet called "Training" for all of the tasks that employees can be trained in, with the employee names in each row, and the task names at the top of each column. The intersection of an employee's row with a task's column will have an "X" if the employee is trained in the task. This is the spreadsheet that I'd like to be formatted; if the employee is trained and also scheduled to be working, I'd like to the "X" to change to a different color.
There are separate spreadsheets within the same workbook for the schedule. This is a bit more complex since the since each week of the schedule has its own spreadsheet within the workbook; each spreadsheet is named for the Saturday of the week it is for, such as "06-07". I've been able to successfully have other formulas in the workbook auto-adjust to the current week's schedule by using variations on the TODAY function (something like INDIRECT("'"&(TEXT(TODAY()-MOD(WEEKDAY(TODAY(),1),7),"mm-dd"))), but I'm not sure how to incorporate this into conditional formatting. On each schedule sheet, there is a column for each day of the week and a row for each employee. The cell for a given day will contain the employee's schedule if they are scheduled, or it will be blank if they are not scheduled. So, the conditional formatting formula would just need to check to see if the appropriate cell was blank or not.
I have a spreadsheet of a couple hundred products, their sales over the last 18 months, and then each product's 18 month average monthly sales. What I would like to do is format them so if any of the months' sales are below their respective average, that cell/month with be highlighted. Excel told me that I cannot do this for multiple rows at a time, and I don't want to go row by row for this many products. Attached is a sample file of the first row.
View 4 Replies View RelatedI need setting up a conditional rule over 2 pages.
Page 1 displays a list of countries.
Page 2 pulls in the RSS feed from the BBC World News website.
I need to find a way to set a rule that will highlight the country on page 1 if it is mentioned anywhere in page 2.
I am having an excel workbook consisting of 11 sheets. Can I apply conditional formatting to multiple sheets at the same time?
View 2 Replies View RelatedDespite 'Google is my Friend' and lot of test, I got a bug in my formula. I'd like to colorize date between (Today + 30) and (Today + 60) The line with the xlsBetween operator, fail...
[Code] ......
Existing solution : I know how to bypass this issue, but it's really an awfull solution : fill all column with orange, and then the Conditional formating will overrun the orange color when nedeed. Works but I don't like it ...
I have a spreadsheet that contains a great deal of information, though most if it contains dates. There are some colums that contain the word "NEED" if i don't yet have the date to put in there, and the cell is yellow. What i want to do is set up conditional formatting to change the cell to pink if:
A)the cell contains the "Need"
and
B)The date in the corresponding row from column C is more than 15 days old.
Start dateEnd Date01/01/201101/01/201102/01/201101/01/201110/01/2011
The above is the result that Im trying to get and I just cant work it out,
Basically,
If B is Blank Format Red
If B is populated and A minus B is less than 5 No format
If B is populated and A minus B is Greater than 5 format Red
-- Im sure its easy but I just cant get it
I am having difficulties trying to get some conditional formatting done.
For the below i need to highlight the 2012 YTD Column based on the following conditions, and i cant get the formula correct
GReen = If 2012 YTD meets /beating both 2012 target and 2011 Actual figures =And(D2
I need to conditional format a cell based on it's current value and a value in another cell.
For example:
Each person would have a different target. So if Steve has a figure of over 20 his highlights green, Paul 12 etc.
However each person would not appear in the same row each day.
The Conditional Forumla of =(A1="Steve.Smith")+(C1>="20") works, but then applying to all cells messes it up a bit.
25
Paul.Smith
14
Ian.Smith
15
Jim.Smith
20
John.Smith
18
I am working in a receiving room at a condo complex and am trying to facilitate how we handle and distribute the packages.
What I have in the first sheet of my would-be file is the unit numbers in a 28X12 array (12 units on 28 floors). I would like to make the array conditionally formatted to be highlighted in red to show that there is a package in for the unit in question. On the next sheet, I am putting information such as carrier, unit number and tracking number for each of the packages we receive. I want the unit number on the first sheet to immediately be red when the unit number is typed in the second sheet. When doing conditional formatting, it is easy to do this, by making the condition that the unit in the array will be highlighted when the unit is seen in the unit column in the second sheet.
My question is this: is it possible to somehow duplicate the references for the entire column that contains the unit numbers. I want a whole column to be the reference for conditional formatting of an array, so that I would be easily able to see who has a package in the receiving room, and who does not.
I am having a problem setting conditional formatting for multiple cells.
The first condition of the conditional formatting works for the cells but the second condition does not. There is probably an easy fix for this but I can't seem to find it.
I need to employ conditional formatting to text on a spreadsheet - but using more than the 3 colours provided from the Format>Conditional Formatting menu.
I recently purchased the ‘Excel Hacks’ (100 Industrial-Strength Tips & Tools) book by David & Raina Hawley, Hack #92 details how to get around Excel’s 3-criteria limit for conditional formatting using VBA, but this solution only describes multiple formatting on numbers, not text. For example, if each letter of the alphabet were entered into separate cells, I would like each to appear in a different colour automatically.
I have what I think is a pretty complicated issue. At my job, we have a running and constantly changing list of jobs that we have to work on throughout the day. The job management system is really unwieldy and it’s often hard to tell what exactly we have to do today and what can wait until tomorrow. So a few times a day, I export the list to an excel doc, which I’m trying to set up with conditional formatting to highlight as green the stuff for today, ghost back what can wait, and leave white and blank the cells that don’t have any info in them. I but the attachment system wasn't working for me, so I can't provide the example I've been working on.
So far, I’ve managed to set up a formula in the conditional formatting that takes into account column C, but I need to take into account information in columns B, C, and D to determine if the job line should be highlighted or dimmed. Column B is the job's title and it is just text, column C is the Begin date, and column D is the due date. here’s what I need the conditional formatting to do.
If the begin date in column C is Today at 9:00am or earlier, and the due date in column D is today, I need to highlight the column. I managed to figure out the first part of this formula, but don’t know how to keep the line from hilighting if the due date is tomorrow: =$C2<=TODAY()+TIME(9,0,0)
The second part is that I need to hilight jobs that begin and are due today (have today’s date in columns C and D), regardless of what time they have if the task title in column B starts with “Rework Request from PS” or “Rework Request from QA"
Ideally, I’d like to change the text color to something nearly white to sort of hide the jobs that don’t need to be done today, and I figured that part out based on the formula I did manage: =$C2>=TODAY()+TIME(9,0,1)
apply this to the whole sheet so I can paste the report into it a few times a day without having to rewrite the formulas in a new sheet every time, and the number of items does change throughout the day. However when I do, the empty cells turn green as if they’re due today, and I can’t figure out how make them stay blank.
I have a workbook with multiple sheets. I want to add conditional formatting for a cell on 1 worksheet based on if multiple ActiveX controls are checked (checkboxes) on another sheet. I have 10 checkboxes (now LinkedCells named "G1" -> "G10") on worksheet "Data Entry". The formula should be if all 10 boxes are checked on the "Data Entry" worksheet, cell "A1" on the "Milestone" will be gray. Any clues on how to write the formula for this Conditional Format?
View 1 Replies View RelatedI use the conditional formatting of duplicates within a column quite often. Now I am trying to highlight duplicates based on multiple cells in the same row. I can't seem to get a formula to make that work. I have four cells in separate columns but the same row, for example H2:K2, H3:K3, H4:K4, etc. I would like to highlight the four cells in that row if there is a duplicate of all four cells in another row. So if one, two or three cells are duplicates in the same column I do not want to highlight any of the cells, it should only highlight the group of four cells if all four cells are identical in another row. Pretty much the same way the default highlight duplicates works, just the value is spread across four cells.
View 2 Replies View RelatedI have an Excel worksheet with about 300 rows and 8 columns per row. I want to shade the highest number and the lowest number for each row. I assume the built in conditional formatting is the best place to start, but I don't really know. Sample worksheet attached.
View 2 Replies View RelatedCan you have IF and AND statements in Conditional formatting formulas?
I put this and I get an error: =IF(AND($G5=""($H5=<>"")) I was testing the water for adding and OR statment also. I really want if cell G5 is blank and cell H5 or I5 has text, then G5 should be red.
Is there a way color a cell red if the the text is "Z" or a number between 0.5 and 10
Or if the cell contains a "Z" or a "C" ....
how to adapt the solution so it would work in multiple cells. Since I was told to start a new thread, here it is. I want to format a cell based on its contents, If it has one of three entries, it should be greyed. I then want to use the conditional format across the whole page, but the solution given in the other thread refers to a single cell, how can I do this without that reference?
View 2 Replies View Relatedformatiing a cell, e.g. change color to RED, in the event the value is a duplicate. To make it clear, I need to show that if the Serial Number of a product just entered is a duplicate and should change color when a combination of conditions is true. i.e. if a "part number" AND the currently entered "serial number" already exist, the entered serial numbers should change color.
View 3 Replies View RelatedConditional formatting duplicates across multiple sheets. I have been using the formula
View 5 Replies View RelatedIf you have a range of cells with values in them (Q2:AZ2), you can use conditional formatting to identify the top x% of the group and it would essentially treat each cell in comparison to the group. I need to identify if a cell in the group is greater than 3*Stdev(Q2:AZ2). Do I have to create conditional formatting for each individual cell or is there a way to apply a function to the group that would recognize each cell the same way that the canned conditional formatting rules work?
View 1 Replies View RelatedI want to conditional format based on all of the following cells contain the same text as AT19 or not.
A19 H19 O19 V19 AC19 AJ19
What is my formula?
I'm working on a fairly complex spreadsheet where I want to pull conditional formatting into an entire row. I have a column in tab1 where I have a bunch of beer styles listed. On tab2, I have a 2 columns: a complete list of styles with a 'yes' or 'no' in the next column based on certain criteria. What I'd like to do is have the column in tab1 highlight if that style in tab2 has a 'no' in the column next to it.
View 3 Replies View RelatedI have twelve sheets that each have a total score on cell G10 that I want to have copied to a thirteenth sheet in a specific column (F5-16). What would I have to do to make that happen? The G10 cell is an auto-summed cell, if that makes a difference.
Also, is there a specific way to create formulas?
I have data in cells A2 - N2 and cell O2 is currently blank. I am trying to set conditional formatting where if O2 has a value entered into it, it will conditional format A2 - N2 and highlight the entire row red.
I tried a formula like =O2"" but that does not work. Also tried a few other things but no luck.
Also, once the formula is set, what is the best way to apply the conditional formatting to rows 3 - 30. I tried the format painter tool but that seems to want to extend the formatting range from rows 3-30 and not just per row.
I'm trying to set up conditional formatting in a spreadsheet where there are 3 possible correct letters that can be entered into a range of cells and if one of these letters is not entered then I would like the cell to be highlighted.
To be more precise, it's an accommodation spreadsheet and in each cell if someone needs a room for that particular night (each night is represented by a separate column) then a letter is used to indicate what type of room they require i.e. "k" is a king room, "s" is a Suite and "t" is a twin. I don't want to force people to have to select from a list which would be the obvious solution to this as it is simply too cumbersome for the amount of data entry we do.
However i want to ensure that if someone accidentally enters anything other than t,k or s then the cell is highlighted. We work in large spreadsheets covering months of dates so to manually have to find any errors is hugely time consuming.
I need for coloring "Expected Delivery Date" column corresponding with "Control Date" and "Control Result. But I want to correspond with the cells' last content of "Control Date" and "Control Result" But first of all I want "Control Date" should be flashed 10 days ago of it's date... (it's already done on my excel file)
Then
I want "Expected Delivery Date" as green when
- "Expected Delivery Date" =< "Control Date" and "Control Result" =Y (Means Control is Ok on due time)
I want "Expected Delivery Date" as red when
- "Expected Delivery Date" > "Control Date" and "Control Result" =Y (Means control is ok not on due time)
- "Expected Delivery Date" > "Control Date" and "Control Result" =N (Means control ok is not given, delayed...)