Locked Cells :: Change The Cell Color On The Click Of A Command Button
Mar 1, 2010
i want the user to be able to change the cell color on the click of a command button. the worksheet is protected. when the user click the command button the active cell changes to red and offsets by 1. then the work sheet is locked again.
The two problems I am having is 1. I want the range to begin from row 10, column k to column FD. all cells down
the second problem is the current code allows me to edit locked cell columns A to J ...
View 9 Replies
ADVERTISEMENT
Jan 23, 2014
what code I can put behind a button so that once I click on that button,
What ever cell i click on, the whole row of that cell will be colored a certain color.
Is this where i would used a target approach?
View 6 Replies
View Related
Mar 30, 2009
I was wondering if it is possible to change the color of a command button after it's been clicked?
This is to allow the user to identify which buttons have already been clicked.
View 9 Replies
View Related
Nov 8, 2012
I currently am using a form button to create new rows.
I need two different kind of buttons. I have a button that does this-
VB:
Sub InsertRow()
'this inserts a row where the button is clicked.
Dim r As Range
[Code]....
However, when I try and create these codes using a Command button (I need it for the color), I get the error
"unable to get the buttons property of the Worksheet class"
P.S one other thing, say the button is in row 3, and Cells A1 and A2 are merged, when you click the button in row 3, it should extend the merge to A3.
View 4 Replies
View Related
Sep 5, 2009
In Excel 2007 I been scanning in the forum for example code. If a cell is clicked on Then highlight the that row from cells A to K. If it is clicked again change it back to no color.
View 9 Replies
View Related
Aug 12, 2008
I want to set up a column so that by clicking a cell once it changes value AND color.
For eg a clicked cell changes to green with a value of 1 point, click again it changes orange with a value of 2 points, click again it changes to red with value of 3 point, then finally click again goes back to no fill with nil value.
This would very very useful for marking my candidates results and categorising them by their level of understanding of a question.
View 6 Replies
View Related
Mar 28, 2013
How i can change the coulor of a cell when somebody clicks the cell using VBA? I need the cells to turn green.
View 9 Replies
View Related
May 3, 2007
I am making a checklist for a Pda program. I need the active cell to highlight green and put an x in it for a specified range. This I have
The next part I cannot figure out -
after the cell have been highlighted once, and properly colored with an x, how can I get it to delete the fill and clear the x on the next click.
Dim x As Long
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
' Set the highlighted cell to a color.
If Not Intersect(Target, Range("d28:d34")) Is Nothing Then
Target.Interior.ColorIndex = 4 ' green = true
'Set the highlighted cell to contain a text character
If Not Intersect(Target, Range("d28:d34")) Is Nothing Then
ActiveCell = "x"
End If
End If
End Sub
View 5 Replies
View Related
Aug 31, 2007
I have a userform with a button on it named But1. Is it possible to store But1 into a variable then activate the But1_Click action using a variable?
Dim strButname As String
strButname ="But1"
Now, how would you activate the But1_Click method using strButname variable. With listboxes you can use the Control(strListboxName) methodology?
This doesn't work, but gives you an idea of what I am trying to do.
Controls(strButname)_click
View 9 Replies
View Related
Jul 16, 2008
I'm working with 2 different sheets, sheet1 and sheet2.
I'll type in entry 1 to 4. 2 comboboxes, 2 cell values. then click on the command button1.
i'll pass over the values to sheet2 like this:
array(comboBox1.value, range("a2").value, comboBox2.value, range("a4").value
I was asked to check against the last time the user click on the command button.
if combobox1.value, range("a2").value, comBoBox2.value, range("a4").value MATCHES exactly the last entry in sheet2, it'll give a popup Box before it continues.
View 9 Replies
View Related
Dec 2, 2008
I have a UserForm with 2 command buttons.
The first Command Button ( called CommandButton22 ) displays the result of some other calculation as its Caption ... this caption will therefore be changing from time to time.
I would like the second Command Button (called EnterButton ), when clicked, to send the caption from CommandButton22 to whatever cell on the active spreadsheet the user clicked into just prior to clicking on the 'EnterButton'.
I would like each time that I click on the 'EnterButton' for the Caption in CommandButton22 to be sent to the next cell down and so on and so on etc.
View 9 Replies
View Related
Dec 26, 2008
I am a very beginner in VBA Excel 2007
I have a textbox named textbox1, How should i write my command button code so that my textbox will display below message when button was clicked
Updates.
1 Dec Monday 10am @ abc swimming complex
Alibaba 12345678 Paid100.
Please arrange first lesson meet up with student.
-Microsoft
View 7 Replies
View Related
Jul 8, 2014
I created a UserForm in which the user inputs data and then press "OK" in order to save an output into a specific worksheet. Once the "OK" button clicked, the UserForm repeats itself with some textboxes in blank so that a new output can be generated.
I am trying to display in a Label of the UserForm the number of times the "OK" button is clicked BUT starting from one. In other words, before pressing "OK" the Label indicates "unit no1" and once the "OK" button is clicked it should go "unit no1 +1" and so on.
For that purpose, I am using the following code:
[Code] ......
The label displays Unit nº1 when starting (which is right). However when I click the OK button it still displays "unit nº1" and then it starts counting normally.
The thing is that it should display "unit nº2" from the 1st "OK" click.
View 4 Replies
View Related
Sep 8, 2009
I have a command button in my excel sheet, if I or my team person clicks on it, the same file has to go to my manager's mail ID from my or my team person's (who clicks) outlook.
View 9 Replies
View Related
Jan 12, 2010
I'm trying to make a spreadsheet more secure to prevent unintentional changes.
What i'm looking to do is to lock all cells so no changescan be made unless the user clicks column A.
Column A should remain unlocked and when the user clicks it i would like the entire row unlocked for editing (but only after column A is clicked)
I will run a macro to lock the entire sheet again once the sheet closes.
View 2 Replies
View Related
Jun 10, 2013
Any way to make it so that a cell can remain locked but be able to click a hyperlink? I need the cell to remained locked so nobody can alter the hyperlink name and value but I would like users to be able to click it and have it open in their browser.
View 9 Replies
View Related
Dec 23, 2013
Userform2 is popped up from another userform3.
How can I have userform 3 when clicked fill in a textbox on userform2 and then finally assign it to cell F3 on my worksheet.
VB:
Private Sub CommandButton2_Click()End Sub
So I need commandbutton2 (which needs to retain a value of 1` when clicked ) on Userform3 to assign the value of 1 to TextBox44 (Which is using control Source F3 so the value here ends up in F3
VB:
Private Sub TextBox44_Change()
If TextBox44 > 5 Then
MsgBox "Your entry must be part between 1 and 5", vbCritical
Exit Sub
End If
End Sub
View 2 Replies
View Related
Feb 22, 2007
I need to create a button in Excel that will change the color of ANY cell I want it to.
I have had a play around and I can only create a button that changes the color of one particular cell!
Can I edit the range code in VB in order to apply this to any particular cell?
View 9 Replies
View Related
Nov 22, 2006
I have a series of 12 option buttons on my spreadsheet named Opt_1 thro' opt_12. Whenever one is pressed, I want to invoke code to action the following:
change forecolor of non-selected option buttons to yellow
change forecolor of the selected option button to red
Enter in Cell A1 the number of the option button slected
So, for example, if Opt_4 was pressed, then
Opt_1 - Opt_3 & Opt_5 - Opt_12 forecolor = yellow
Opt_4 forecolor = red
Cell A1 gets the value of 4 entered into it.
I know how to do this on a user form, by putting the option buttons in a frame and then picking up the array value of the option button, but I have these directly on my spreadsheet next to 12 cells as this is more relevant to my application.
I thought of a Select - Case statement, but this will be rather lengthy. Have you any suggestions on how to tighten this code down.
View 3 Replies
View Related
Feb 18, 2008
I would like for a vba programmer to tell me if the following program can be written before I attempt to code it. When I open Excel I want to see cells containing names in a square array with red backgrounds. As I click on each cell I want the cell to turn green and I want an alphabetized column of the names to have a 1 recorded(after I click) indicating that the person is present. If a person's name is red then I need a 0 recorded. If possible, I would like to be able move over one column each day that I take attendance by clicking on a cell in a row above the column of names. I am a math professor and I write computer code most every day but I have only written some small routines in vba that did not involve events.
View 3 Replies
View Related
Sep 17, 2008
My boss wants a spreadsheet that has multiple buttons on it that will change the background color of a specific cell to four different colors. Example:
Text written in Cell B3, Button in Cell A3 that will change the Background color of Cell B3 to either Green, Yellow, Red or Blue.
There will be a lot of buttons on this worksheet following the same format as above. I don't want to change the value of what is in the cell, just the background color.
View 7 Replies
View Related
Oct 7, 2007
How can i set up my spreadsheet so that all protected cells are a different colout to the main sheeT.
I would like this colouring to appear in the sheet when in protected and unprotected mode
View 4 Replies
View Related
Sep 25, 2009
Need a method for launching the color palette from a Button Click event so that the palette opens, the palette may be used to set a color, then have the color palette return the Long INT color value to the calling click event routine?
View 3 Replies
View Related
Nov 11, 2011
I have a togglebutton for an excel sheet in use for scoring psychological tests. When pressed, the button higlights the cells where a raw score is inserted.
What I need is a code to higlight the togglebutton when pressed, eg. green (colorindex 4). The button is white. How to do this?
Below is the code, It has more lines than needed, but it works.
Private Sub ToggleButton1_Click()
'FKV TOGGLE'
ActiveSheet.Unprotect "manisk"
If ToggleButton1 Then
[Code] ........
View 2 Replies
View Related
Jan 28, 2009
how to change the color of a command button created by using the control tool box
View 2 Replies
View Related
Jan 29, 2009
so I know how to change the color of a command button(right click, properties), but is there a way to change the color to a specific red green blue range? lets say 102 28 02 for example
View 2 Replies
View Related
Oct 8, 2009
what i am trying to do is toggle the color of a shape between red and green. what i have currently (courtesy of a search on this site) is this macro:
View 9 Replies
View Related
May 11, 2012
I have this code that ideally should change font color in usedRange to red upon button click. The problem is it's not working and I've been pulling my hair out all day (not that there's much left of it)
HTML Code:
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
Dim UsedRange As Range
Dim cel As Range
[Code]....
and the related "End If" this works i.e. if I click on any cell within respective sheet font in used range all changes to Red but I only want this to change on CommandButton1 click which I have inserted in sheet.
View 7 Replies
View Related
Aug 22, 2013
I have a command button that when pressed I would like the name written on it and colour to change
View 2 Replies
View Related
Dec 27, 2007
I am looking for a way to alter the appearance of a button when a second one is clicked. I have two buttons, "Yes" and "No", and when one is clicked I would like to 'grey' the font in the other without disabling it, and vice versa. I have tried recording a macro as I go into the button's properties and change the foreground font, but it does not record the font change, only the selection of the button object.
View 2 Replies
View Related
