Macro For Copying Rows Of Data In Sheet 1 To Sheet 2

Oct 8, 2009

I have a couple of spreadsheets that requires me to copy data from Sheet 1 that matches certain criteria to Sheet 2.

I have tried using posted VB codes that have been written for other people but they dont seem to work (this is probably to do with me not actually knowing what I am doing, as I am not sure what I should be replacing and what I need to be deleting etc out of the pre-written code )

I need to be able to search on column e in Sheet 1 for anything that has just h written in the cell and then copy all the rows that match into Sheet 2. I also would like to ensure that when it is copied it doesnt go in row 2 but maybe 4 or 5 as I have quite allot of headings.



ADVERTISEMENT

VBA Copying Two Rows Of Data From One Sheet To Another Sheet

Jul 30, 2013

I have a workbook, "Assessment District" with 3 worksheets. In worksheet "Original," I have 252 rows with columns A-V. I want to copy two coloumns "C" (range 6-252) and "N" (range 6-252) from the worksheet, "Original" into a new worksheet titled "Send" in columns A & B. I only want to copy the two columns "C" and "N" for each row, if column Q does not contain "beach town" or "freeway."

For example, row 6 contains beach town, so I wouldn't copy C6 and N6 onto "Send," but row 100 doesn't contain beach town or freeway, so I would copy C100 and N100 into "Send."

This is a workbook that would be updated annually.

I'm not skilled in VBA at all, but want to impress my supervisor where I'm interning.

View 3 Replies View Related

Macro For Copying Certain Rows To Another Sheet.

Oct 20, 2009

I'm trying to create a macro that examines a sheet of data, and if the data in a certain column (column P) contains either A,B, or C then it would copy the entire row over to another sheet. If it contained a blank or D,E, F, etc,etc then it would just ignore that and move to the next row.

I have no idea where to start, i've searched google and here on Mr.Excel.

View 9 Replies View Related

Copying/Deleting Rows From Sheet To Sheet

Aug 2, 2007

what I need, but can't seem to string anything together for the final product. What I want to do is search one sheet, in column BQ, for the word Complete. If a cell has that word in it, I want to copy that row, paste it into another sheet, and than go back and delete that row, and continue the search until all rows have been searched. Is there a simple way to do this?

I was thinking of an auto filter, but I'm not sure it'd work how I want it based off of what I've read.

View 9 Replies View Related

Macro Copying Row To Next Blank Row On Another Sheet With Data Validation?

Mar 19, 2013

I am currently working in an excel file for which i want to create a macro. I am using colomn F as the base from which it should be determined whether a row should be copied. In colomn F the user can select three options through data validation. If 'completed' is selected, the whole row should be copied to the second sheet, and each copied row should be pasted to the next empty row. The data on the source sheet starts at row 11 and should be copied to sheet 2, starting from row 11 as well.

View 5 Replies View Related

Copying Sheet Names And Cell Data Into New Overview Sheet

Mar 21, 2013

I have workbook that has several sheets within the workbook that are set up identical. Each of the sheets in the workbook are for a specific company.

As of right now I have been adding a sheet to the workbook that is an overview for what is in each sheet (the individual companies). Currently I am doing the formatting of the heading and column names manually and I pull the data from each sheet with a VLookup. I have been trying to enhance my VBA skills with coding something that will fill in the appropriate cells from worksheet to worksheet.

What I am trying to do is to populate an overview sheet with cells C24, C25, and B36 being static on each row per sheet. Then each row will be populated with cells C(36, 59, 70, 81), D(36, 59, 70, 81), F(36, 59, 70, 81), G, and H(36, 59, 70, 81). The overview sheet will have the diagram below in a ru

I attached an example : example.xlsx

Sheet 1
C25
C24
B36
D36
C36
F36
G36
H36
I36

[Code] .....

View 1 Replies View Related

Script Not Copying Data From Emails Sheet To New Sheet

Jun 8, 2014

I am currently working on a script that will copy some data from one sheet to another, but I keep getting the following error message:

Run time error: Object required
at
Set uRng = .Range("F1", .Range("F" & .Rows.Count).End(xlUp))

What could be causing it?

View 3 Replies View Related

Copying Data To Another Sheet If Data Exists (using MACRO)

Jan 21, 2013

I have a worksheet which contains certain sections. I want to create a macro which will run if data is input into those sections. This macro should copy whatever was entered into another worksheet automatically as data is being entered. Is there a way for that?

View 8 Replies View Related

Copying Sheet Data And Pasting It To A New Sheet

Jun 28, 2006

I have multiple worksheets and I am looking to take specific information from those worksheets and paste them into a new one, thereby compiling the information.
The "C" column is populated with certain cells that say "Not Acceptable". This varies from sheet to sheet, but all in the C column. I'm looking for a code that will run through all the sheets, find the cells that say "Not Acceptable", copy that row of information it is in, and paste it onto a specific sheet that we'll call "Summary"

View 4 Replies View Related

Copying Cells From One Sheet To Multiple Sheet And Naming Sheet As Copy Text?

Dec 24, 2013

I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...

Is there a simply way of doing this loop? I can probably fit my other coding into the structure.

View 4 Replies View Related

Copying Data From Sheet To Sheet Using VB

Sep 21, 2007

I have attached my workbook. This has 3 sheets that contain data to be manipulated plus a data page.

The first sheet 'Referrals' is a permanent record, data remains in it for ever.

The second sheet 'database' needs to contain copied data from 'Referrals' when an entry is made in col P of 'Referrals'.

When an entry is made in col P of 'Referrals' the following is required to be copied into the next empty line in 'Database'

Col O 'Referrals' to Col A 'Database'
Cols B,C,D,E 'Referrals' to col B,C,D,E 'Database'
Cols G,H,I,J,K,L 'Referrals' to col L,M,N,O,P,Q 'Database'

Information in 'Database' will be required to be removed from time to time and copied to the sheet 'Leavers' which is another permanent record.

When an entry is made in Col AI of 'Database', the whole line (A:AI) should be cut and pasted into the next free line in 'Leavers' starting at col B. The data in 'Database' col AI also needs to be be copied to 'Leavers' col A.

If cutting the line from 'Database' leaves a gap, the entries below should be moved up.

View 14 Replies View Related

Copying Rows From One Sheet To Another

Feb 23, 2007

i am trying to copy rows from several worksheets into one master worksheet. if column F of any row has a value greater than zero then the rows should be copied to the master worksheet with all data.

View 5 Replies View Related

Conditional Copying Of Rows From One Sheet Into Another

Sep 1, 2009

I have one excel 2007 workbook with three sheets in it.

Sheet 1 is a master sheet with 1858 rows and 45 columns of data.
Sheet 2 has the qualifier data, that is, one column with 255 unique 6-digit integers each in its own cell.
Sheet 3 is a result or output sheet that is currently empty.

Here is what needs to be done.

Compare all of the 255 unique 6-digit integers from Sheet 2 with the integers in column number 15 (or Column O) of Sheet 1.
If there is a match then copy that entire row from Sheet 1 into Sheet 3.

View 9 Replies View Related

Out Of Memory Error 7 - Copying Rows From One Sheet To Another?

Feb 27, 2014

I am using the below macro to copy the rows (Starting from Row 2 excluding header row) to another sheet (Starting from Row 2 excluding the header row). I have a huge number of rows which i need to copy to the new sheet (crossing 1.5 Lakh records) which is probably causing "Out of Memory Error: 7" to occur when i execute the below code.

[Code].....

View 14 Replies View Related

Deleting Rows From Sheet 1 When Table On Sheet 2 Does Not Have Data Anymore

Jul 3, 2014

Currently, Im running a button macro. When this button is clicked, the table from "315 Employee Data" will copy the names from column C to "315" sheet B12 onwards.

Now, what i want is when I update the employee data on "315 employee data" sheet, I want "315" sheet to automatically match the names from "315 employee data", delete and add names when I add or remove employees from the column the next time i click on that button again.

After the above is achieved, when i add new employees,run the macro and it displays the updated list of names, I want "315" sheet column A to do automatic numbering.

I have attached the file for your reference.samplesample.xlsm

View 2 Replies View Related

Macro To Copy Rows From Data Sheet To Worksheet

Apr 23, 2014

I have two worksheets.

Worksheet 1 is a large data sheet containing columns of data (Date, State, Payment Method, etc, etc)
Worksheet 2 is the 'Report' worksheet with 2 blank cells (A1 and A2) for users to manually enter the Start and End dates, a drop-list for State names (B1) and a drop-list for Payment Method (C1) - Cash or Credit Card.

How can I write a macro to:

1) Filter by Start and End Dates then,
2) Filter by State name then,
3) Filter by Cash or Credit Card then,
4) Copy these filtered records (i.e. whole row/s) onto the 'Report' worksheet starting at Column A, Row 5.
5) Macro to end with a 'Successful' message.

View 1 Replies View Related

Macro For Saving Multiple Rows Of Data To New Sheet

Apr 14, 2009

I am looking to save a range of data from an input sheet, to a data sheet.

I know how to save indivdual cells to a worksheet in the form of a data

what i am looking to do is save A6 - J6 down A19 - J19, but only saving the data which is entered

A6 - J6
A7 - J7

View 6 Replies View Related

Excel 2007 :: Copying Formulated Rows From One Sheet To Another

Dec 18, 2013

My knowledge of Excel 2007 is minimal, from formatting individual cells, to creating column totals. I've used it for years in my household budgets. I have an attendance form which is about 3 pages long; currently, it's separated at page breaks, with column totals at the bottom of each 'page'. This is easy because the Row #s are infinite, right? Lately there have been regular adjustments, and I believe the project might be less cumbersome if it were spread out on separate sheets, but how to bring the rows of column totals to cumulative totals on the last sheet.

View 6 Replies View Related

Copying 193 Rows Yet Referencing Consecutive Cells From Different Sheet

May 1, 2013

I have a worksheet "parent child" with product data, cells F4 and BK4, pull pertinent data from cells T2 and M2 respectively on a different sheet "products".

A5:A196, D5:D196, F5:F196 is dependent on cell F4 and BK5:BK196 is dependent on BK4.

Once we get to row 197, the cycle starts over again. F197 and BK197 needs to equal products!T3 and products!M3. Then rows 198 through 389 will be dependent on row 197.

I basically need this to repeat perpetually for about 1000 different products on the products sheet, thus the ability to create approximately 193,000 rows.

I am not sure what it will take to do this, i am fine if I have to drag and copy all rows, which I have tried to create and failed at, I end up with products! T196, instead of T4.

View 1 Replies View Related

Copying Rows With Multiple Colum Values To New Sheet

May 21, 2008

I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.

So from below attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5.

I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.

View 9 Replies View Related

Macro Adds Blank Rows When Pasting Data In From Another Sheet?

Mar 11, 2014

I have a macro which opens a csv file, moves a few columns about then pastes the data into a master workbook. The problem I have is that even though there is only around 1,500 rows of data on the csv file, the sheet on the master workbook is showing up to row 1,048,576 after the data has been pasted in! This is causing issues as I use this data later on in the macro and there are a couple of 'find and replace' commands that take an age to run because of the number of blank rows.

Code:
Workbooks.Open Filename:= _
"L:PVDDBB15." & Format$(Sheet1.Range("G5"), "ddmmyy") & ".csv"
Columns("AB:AB").Select

[Code].....

View 7 Replies View Related

Macro - Copy Multiple Rows Of Data To New Sheet On Change

Dec 23, 2008

I have a multiple rows of data, but one column which is K has data like:

1020
1020
1020
1020
1020
1030
1030
1030
1030
1050
1050
1050

What i want my macro to do, is whenever that number in column K changes to copy all the data in row A thru K to a new sheet.

View 9 Replies View Related

Automatically Copying Rows From One Sheet To Another Depending On A Cells Input

Jun 2, 2009

i have a certain column that tells me if a client has withdrawn from the company, and the column just says "y" or "n" i want excel to automatically copy the whole row to another sheet if that cell is a "y" for yes the client withdrew...

View 9 Replies View Related

Macro Copying Over An Empty Row To Another Sheet

May 29, 2009

I have a Macro below that copies a range of cells from my Formulas Sheet to my Report Sheet.

The problem is that it is copying over a blank row.

I can't figure this out.

Anybody know how to stop sending over the blank row?

Here is my ...

View 9 Replies View Related

Macro For Copying Certain Cells To Another Sheet

Jun 9, 2006

I browsed through the other posts concerning copying and couldn't find (or maybe I didn't just understand) how to do what I want. I looking for a macro for a comand button that when pressed copies certain cells in the active row to another sheet. I recorded a macro for what I wanted to do ( to make the explenation easier) for one row but even the recorded macro refuses to work.

I'll put the recorded macro here if it helps someone, but as I said even that doen't work

Private Sub Kopiering_Click()

Range("E3").Select
Selection.Copy
Sheets("TOTAL").Select
Range("K3").Select
ActiveSheet.Paste
Sheets("BRL Newbuilding").Select
Range("D3").Select
Application.CutCopyMode = False
Selection.Copy

View 8 Replies View Related

Copying Data From One Workbook Sheet To Another Workbook Sheet Without Overwriting

Jul 1, 2014

The two sheets are...

1. Sheet1.xlsx (regular excel sheet as the extension is .xlsx)

2. Consolidated.xlsm (macro enabled sheet as its extension is .xlsm)

1. Copy both the files on your system under a particular folder.

2. Now make 9 replica's of Sheet1.xlsx and name them as Sheet2, Sheet3, Sheet4, .......... Sheet10

3. Open the sheet Consolidated.xlsm and see the button i have added called "Pull Data".

Now write down the code by adding a Module in that excel sheet from the code window.

4. Write a code that will open each of these sheets (Sheet1, Sheet2, Sheet3, Sheet4, .......... so on) one at a time and will copy the data from these sheets to the Consolidated.xlsm sheet.

5. Make sure that the data is appended(and not overwritten) from the multiple sheets (Sheet1, Sheet2, Sheet3). that is once you paste the data from sheet1 to Consolidated.xlsm then the Sheet2 data will be pasted at the end and after that sheet3 data will be pasted and so on..

6. In this way at the end we will have all the data from Sheet1, Sheet2, Sheet3...in the consolidated sheet.

7. The Division column in the Consolidated sheet will have the value of first row in these multiple sheets. So after making the replicas of Sheet1, please change the value in first row (Range A1) to any other value to avoid the confusion.

8. I have highlighted the data for two sheets in yellow and grey color in the consolidated sheet.

View 8 Replies View Related

Getting Sheet To Lookup Data From Another Sheet Then Referencing Rows Data?

Jul 22, 2014

I want to be able to paste the large amount of data I get each day into the first sheet in my workbook ("data dump" sheet), the data will be formatted in the way i have used in the example workbook.

I then would like to be able to just have to enter 2 values into columns A and B of "1st output" sheet (Label in A, and Item in B), then have it look up the data that corresponds to those 2 values that are both in the same row in the "data dump" sheet, and have it copy and paste all of the relevant data in that row into the row in the "1st output" sheet.

The data I would want excel to find and place for me in the first sheet is highlighted in yellow

As a way of keeping track of this every day, I then need the data from the "1st output" sheet, to be fed into the "2nd output" sheet. This sheet would have all of the peoples' names already in it, but would just need to look in the "1st output" sheet for references to these names. If one of the names pops up, I'd need the date shown in the row of that instance to be placed after their name. This will allow me to keep a log of how many times their name gets flagged up, as well as the dates on which it happens. Again, the data I'd need excel to look up in the "2nd output" sheet is highlighted in yellow.

If there was a way of having the 2nd sheet add new names it finds on the 1st output sheet, that aren't already referenced on the 2nd output sheet in column A, that would be amazingly handy if it could then enter that name into column A and start a new row for them

Example file :
Attachment 334122

Alternative link [URL]

View 1 Replies View Related

Macro To Copy Data From Sheet 1 To Multiple Pages On Sheet 2 In Correct Cells

Jan 15, 2009

I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.

I will try to explain the issue here without opening the attachment.

Here is an example of the Data on Sheet1

View 13 Replies View Related

Excel 2007 :: Macro - Match Data And Copy Rows To Existing Sheet

Jan 11, 2012

I've already found a TON of threads about this process but nothing that matches specifically what I'm trying to do.

I have a spreadsheet that I'm using to auto fill other tabs with data that only matches specific criteria. Here's what I'm looking to do:

Columns I, J, K, and L may be marked as either Y or N (or blank). I have different sheets that require 1, 2, 3, or 4 of those columns to match Y. For example, on sheet 2 I want to copy the entire row if there's a "Y" match on column I and J. On sheet 3 I want to match "Y" against, I, J, and K. Sheet 4 I need to match only L, etc.

I need the data copied into the existing sheets to start on row 7. I have other data on rows 1-6 that cannot be moved.

I'm running Excel 2007.

View 5 Replies View Related

Macro That Will Compare The P'folios In Sheet "Data To Sheet Workings

Feb 28, 2009

i need a macro that will compare the p'folios in sheet "Data to Sheet Workings, and then list the p;folios which is in sheet Data but not in workings in Sheet "New", so in the example below this would be ETSTSA ...

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved