I have a database function in which I cannot use an "OR" operator. I can add "+" on to another (Ex. Sum(a1:b1)+sum(b2:c3)). The function itself is 80-90 characters long. So after I add a few together the cell runs out of capacity. I have a analysis that simply does not lend itself to listing out individual functions and then summing them.
View 3 RepliesI have three columns named "Type" , "start_date" and "end_date".
Type column can hold only "A","B" and "C".
start_date and end_date columns are time stamps. ex: 9/14/13 9:35 AM
I want to do conditional formatting like,
If type = "A" and (end_date - start_date) value between 30 and 40 (in hrs) then it should be amber.
I did for greater than and lesser than values, but I am facing problem while doing the above one.
I would like to return the lowest non-zero number in the second column (B), based on the value in column A
in this example, 1 should come back
Example numbers
A B
22 0
33 0
22 1
22 2
33 2
22 3
I started out using:
=IF(AND($A$1:$A$6="22",$B$1:$B$6<>0),MIN($B$1:$B$6),"")
But it is not working for me.
I am trying to use the function DGET() to re-organize the information on the "DbCalc" sheet in the attached workbook. This formula can be found in C2:C5 in "purple. I am referencing the worksheet "Exp Rpt" as a database and match info based on two criteria. I can do this using an array formula like this ={SUM(IF((A1='Exp Rpt'!B$9:B$10000)*(A2='Exp Rpt'!E$9:E$10000),'Exp Rpt'!H$9:H$10000,0))} , however with the amount of data that I need to reference this array is soaking up all my memory. I would usually turn to access to do this, but the person that will be utilizing this tool only knows excel.
View 11 Replies View RelatedI have made a database to record drawing numbers.
In column A is the drawing number and in Column B is the revision number.
I am trying to write a macro that will alert the user when they are trying to enter a drawing that contains BOTH the same drawing number AND the same revision number as one already in the database.
Since drawing numbers will be reused and only revision numbers changed when a revision is entered, I need the function to check both column A and Column B then display a msgbox if there is a match.
I have on occaision seen -- within a formula. e.g =SUMPRODUCT(--(PMonth=$A3),--(PName=$A$1),PLTime). Could someone explain the relavance/effect or use of this as it seems outside of standard operators.
View 9 Replies View RelatedHow to use the LIKE operator? I have tried:
mytable.field like '098'
mytable.field like '098'
mytable.field like '&098&'
mytable.field like '*098*'
This is in A SQL string connecting to a MSSQL db over ODBC
Excel has operators for Less than, Greater than, Equal to, etc., etc. Does anyone know if there is a Between operator? (Maybe an undocumented or little-known feature like DATEDIF)?
There is a Between Feature in the Conditional Formatting Dialog Box - it would sure be nice to be able to use it in a non-formatting formula, or maybe you could explain how you pros achieve a "between" result without resorting to VBA.
I am currently trying to create a database of products for my company. For each product I would like to include an image associated with it. I then want to have on another sheet a place where the user will click an error and be able to cycle through the products. As tehy cycle the associated image will pop up.
What I need to understand is after importing the image into excel, how do I associate that image to a cell so I can reference it in another sheet of the database. I am not concerned with how large the database will get, my pictures are quite small.
I'm trying to lookup a database named database and return a time in column A, based on criteria in cells a1 and b1 on another sheet, A1 would contain a number and B1 would contain a day from mon-fri
eg of Database
A B C D E F G
10:00 5000 Mon Tues
11:00 5000 Wed Thur Fri
and so on
if a1= 5000 & b1=Wed
how can I return 11:00
I have tried index and match =index(a:a,match(a1&b1,b:b&e:e,0))
revised this code to reflect the "not equal to". I want the user to only enter "In" or "Out." Therefore, If cells b19:B26 does not have either word, then the message box will prompt the user to enter the correct word again. I think my code needs to be revised into some kind of loop.
View 9 Replies View RelatedMOD Operator gives one result when this is used as worksheet function and the different one when I use that in VBA.
Cell A1 = 01-Jan-08
Cell A2 = 02-Jan-08
In Worksheet
=MOD(A1-A2,8) Gives 7
In VBA
Reminder = Range("A1")-Range("A2") Mod 8 Gives -1
I'm using the below code to get only those rows which contains 'Deploy' or 'Pre-prod' but it gives less rows than its supposed to do.
View 11 Replies View RelatedWhile proof-reading my code, I've noticed that these two true select cases ("S" and "W") shown below wouldn't "yield" what I want. I've tried to replace AND (highlighted in red) with "," (comma) but I still get the same result - it still returns a value evaluating either one of two conditions but not BOTH:
Code:
sChar = Split(Waypoint, ",")
For j = LBound(sChar) To UBound(sChar) Step 3
Lat = sChar(j)
Lon = sChar(j + 1)
Elev = Val(sChar(j + 2))
Next j
[code].....
Iīm trying to find a way to get a formula which can look if there is a character (letīs say it is "-") in a formula which is, by the way, variable (letīs say each cell has different values like: =899+59-6 and so it goes and goes), and brings me a true or false value.
Specifically it is like this:
I have formulas to be evaluated like the following:
=899+59-6
I need a formula which can look into the formula and if it finds the character "-" or a "+", brings me a true or false message.
Can you use a variable as an operator? For example:
Dim op
op = ">"
If Var1 op Var2 Then MsgBox "It Works!"
I have parameters stored in a database and each parameter includes an operator. When I compare a given value to the parameter, I was hoping to do that dynamically by extracting the operator from the parameter and using that in the comparison.
Otherwise, the only way I can see to do it is create a Function with a Select Case list for all the operators to check the parameter, do the comparison, then return the value to the Function.
I've used a countifs, but I'm having trouble doing a sum in a similar way. I have 2 databases and I will try to explain below. I need the to sum the values of database 1 if the second database is >= 20. So the value I would expect on this example would be 900. I would also like to be able to highlight which ones are elliminated. Such as coloring the text red.
Database 1
Eric 100
Jenny 200
Gina 300
Doug 400
Database 2
Eric 18
Jenny 20
Gina 34
Doug 55
filter a pivot table that contains these 3 column fields: User 1, User 2, and User 3.
However, when I want to see the results for "John" in all those fields, I need to use one filter at a time. Is there any other way to see all results of the Pivot Table where "John" is a User, no matter if he is the 1, 2 or 3 user?
When I run this code it does the exact opposite of what I want it do (if not contained in that character list then delete). So basically if it not in the character list then delete, but it if is in the character list it deletes....
[Code] .....
I need to switch between less than or greater than in my formula based on user selected drop down that gives the user two options "" My formula has "
View 9 Replies View RelatedI dont have much experience with VBA and im looking for an operator that helps me find a word (or part of a word) in a sentence located in a cell. I have to do this to create a user friendly form. I cant use the Find option in excel because i need to do this in a form.
View 3 Replies View RelatedHow the like operator works with brackets and # tags etc...
View 9 Replies View RelatedI'm just trying to add the "=" operator to the below "" operators, as this line of code presently doesn't account for any numeric matches, of which I have plenty, and DO need to account for! Gosh, might someone here know how to integrate such a thing into this code?
If Range("I3") Temp Then Range("I1") = Temp
I'm using Excel 2003.
I have a Userform where you can enter a date and select a comparison operator from a combo box. Any one of these (= < <= > >= <>)
In VBA I then load a range into a dictionary object and then loop thru it to compare the dates in the dictionary to the date selected in the userform but I can't get the dates to compare correctly. I think it has something to do with the Evaluate function comparing the dates as strings but I'm not really sure.
VB:
For Each strKey In dictValid.Keys()
If Not Evaluate(CDate(dictValid(strKey)) & cboDteOperator.Value & CDate(txtDteSel.Value)) Then
We have just been upgraded to Excel 2010 with it's hideous menus. tell me where to find =, +,-,* and / signs in the menus before I go mad!
View 6 Replies View RelatedI have a date in cell A1. I have an operator in cell A2. This info is then merged in to cell A3 with the following formula: =A2&TEXT(A1,"dd/mm/yyyy"). My data range is called "wc_date_of_loss". I want to use this info in a SUMPRODUCT formula (as the dates and operators can be changed by the end user). What's the correct syntax for that?
=SUMPRODUCT(--(wc_date_of_loss&A3))
=SUMPRODUCT(--(wc_date_of_loss=A3))
=SUMPRODUCT(--(wc_date_of_loss=TEXT(A2&A1,"general,dd/mm/yyyy")))
How Can I Copy All My Formulas In Worksheet With Out Operator "="
Like Copy Paste Special
I am using excel 2002. I want a cell to use conditional formating, whereby say IF CELL A1 CONTAINS "ORDER" THEN A2 WILL TURN A SPECIFIC COLOR.
I can easily figure this out if A1 EQUALS "ORDER", but can't figure out the operator or trick for CONTAINS ...
I've tried =A1="*ORDER*" but it doesn't work . . .
What does this operator do?
View 2 Replies View RelatedI use Microsoft office 2008 for MAC i currently have 4 xls witch contains clients
The one has 11.206 the other 11.971 and the other 4267 people
THe 4th and last list has 3462 and i need to check witch of the people in 3462 are not contained in the other 3 xls
I tried to copy - paste some info in order to be replaced by excel but nothing