Date Inputbox Value Correction
Feb 9, 2014It show error, how to correct it .
[Code] ......
It show error, how to correct it .
[Code] ......
I have a VBA code that works really well but i wondering if there is a way to do the same thing but without the message box and just enter in the dates instead.
View 11 Replies View RelatedI made a selection and coloring macro, the filter is based on the inputbox that pops up. What I would like to do here is, that when the box pops up it would have a written date in it, which is the today always. And the filter should select all which is 2 weeks later than current date.
Code:
Sub kethet()
Dim datum As Long
Dim most As String
LRow = Range("E" & Rows.Count).End(xlUp).Row
[Code] ..........
I want to be able to validate the data input into an input box. It must be in the following format
Jun-07
First three letters of the month, a dash then the last two numbers of the year.
I have the inputbox so i can set a string value,
When the inputbox Cancle button is pressed i want to exit sub,
If the inputbox value is nothink and ok button, I want the msgbox displayed then goto newname.
If the inputbox has a value do >>>>>>That>>>>>
I was wanting to input the date Before Printing. I want to write some code.
Private Sub Workbook Before_Print (cancel as booleen)
Inputbox = "Enter the date you would like in Mondays cell C4"
Application.Worksheet.Range("C4").Value = InputBox.Value
PrintDialogBox.Show
End Sub
I know I am making a very rough attempt at what I am trying to achieve, I just don't know coding that well.
I am trying to get the user to enter a relevant date but code returns date in US format. That is mm dd yyyy instead of dd mm yyyy.
View 5 Replies View RelatedI am writing a module which have a different test based on for each of the previous 2 column cells. It calculate the days passed or in simple way calculate the date difference for the 2 columns and puts them in third. But i need to use a inputbox for entering the first date for monday of the month each time i use the worksheet.
When i try using the module for each cell of the column it display the input box for each cell. is there any way so that i just enter the value in input box and it can be used in rest of the module.Without using it again and again.
I am preparing a daily report available in sheet1 with the actual input in sheet2 generated through a tool.
The report contain three columns i.e. total cases, Total correction done and Not corrected. From the total cases on a specific date, I need to calculate how many correction have been done and how many are pending.
E.g. 01 January 2013=5 cases are uploaded in the tool.
on 02 January 2013, it was observed that 3 cases were corrected and 2 are pending But 9 cases cases are uploaded on the same day in the tool .
So Total correction done (C3)=3
Not corrected(D3)= 11
I have different dates in column A, let's say:
10/26/12
11/1/12
11/15/12
2/12/13
I want to say that if the date is <= 12/31/12, put "LEASED IN 12", othwerwise put "LEASED IN 13".
My formula:
=IF($A1<="12/31/12",'LEASED IN 12","LEASED IN 13")
I get only 'LEASED IN 12".
=COUNTIFS($K$54:$K$84,">25
View 9 Replies View RelatedSub startrd3_click()
Range("B5:AY64").Select
Selection.Sort Key1:=Range("B5"), Order1:=xlDescending, Key2:=Range("C5") _
, Order2:=xlDescending, Key3:=Range("E5"), Order3:=xlDescending, Header _
:=xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom _
, DataOption1:=xlSortNormal, DataOption2:=xlSortNormal, DataOption3:= _
xlSortNormal
' ERROR CHECKING HAPPENS HERE TO MAKE SURE PEOPLE HAVE NOT PLAYED EACH OTHER BEFORE
Columns("J:W").Select
Selection.EntireColumn.Hidden = True
Range("I4").Select
End Sub
If any of you gamers out there are familiar with the Swiss Pairing System, the goal of this sheet is to perform the pairing functions based on results. The goal of swiss pairing is to partner folks up based on win loss records, however, the players can never play each othe more than once. What i am wondering is how to create the vb code required to make sure the pairings are unique while keeping the rules of swiss pairing together.
Here's how it works:.............
In A1 have two words, say "first" and "second" as two lines entered by pressing Alt+Enter after typing the first word. The requirement is remove this formating OR to get these two words separately in single cells. ie B1=First & C1=second.
View 3 Replies View RelatedI am trying to enter the last name "Teh" in a cell. How do I turn off auto spell correction that turns "Teh" into "The"?
View 3 Replies View RelatedI need to step out of a macro based on a user respone, and I don't know how to end this macro if the user needs to correct a cell entry.
If they respond "no", I want to sub to end and select the cell where the correction needs to be made.
I need a hand with a worksheet that we use.
We do a penetration test on soil, write down the values from the machine, then enter into excel and it plots a line graph.
Depending on the values, sometimes a correction is required. This is manually done at the moment.
I would like to have excel do it for us.
I have attached an example of a manual correction I have done as well as the excel calculation worksheet.
There are 2 results given (one at 2.5mm penetration & one at 5.0mm penetration), we calculate both, then use the highest result for the report.
the x value is a constant and the y is a variable.
Attached Files :
Copy of Master WA CBR Worksheet Soaked.xls‎
DOC230714-002.pdf‎
I have the following VBA code and try to sum the range from B2 to CY2 for DA2; then B3 to CY3 for DA3, etc. Therefore I use the for loop. It results in "Application defined or Object defined error".
View 4 Replies View RelatedI'm trying to calculate the sum of rank vlaues in an array formula (required for a Mann-Whitney U-test calc). For example, I have the results of a survey quesiton (1-5 rating) with particpant groups of Sales, Marketing & Other. I want to sum the Ranks of the data points that come from Sales or Marketing (but not Other). The added complexity is in the need to add in the Rank correction value to account for ties.
The conditional arrays are the tricky part. I'm very close, but the array formula is still including the Other values. If I delete those data points the formula works great. For those with strong stomachs, I've copied my latest formula below.
$C$% = "Sales" and $F$5 = "Marketing"...
={SUM(IF('Survey Data'!$D$3:$D$30=$C$5,RANK('Survey Data'!$W$3:$W$30,IF(OR('Survey Data'!$D$3:$D$30=$C$5,'Survey Data'!$D$3:$D$30=$F$5),'Survey Data'!$W$3:$W$30))+(($M115+$N115)+1-RANK('Survey Data'!$W$3:$W$30,IF(OR('Survey Data'!$D$3:$D$30=$C$5,'Survey Data'!$D$3:$D$30=$F$5),'Survey Data'!$W$3:$W$30),0)-RANK('Survey Data'!$W$3:$W$30,IF(OR('Survey Data'!$D$3:$D$30=$C$5,'Survey Data'!$D$3:$D$30=$F$5),'Survey Data'!$W$3:$W$30),1))/2))}
I have this Formula in a excel sheet =IF(AND(COUNT(F12;G12)=2;G12<F12);G12-F12;IF(AND(COUNT(F12;G12)=2;G12>F12);ABS(F12-G12);""))
My problem is that when the result is 0 it just leaves a blank cell without a 0.
Can i correct this so that when the result is 0 it will actually show a 0 in the cell? I can´t put a 0 in the end of the formula because then it shows zeroes in all the cells without information aswell.
I have another dilema. I am writing a macro that essentially takes a template from a workbook and copies it to another workbook that already has data. the data is then imputed into the pasted template through the macro... my dilema is that I have numerous data sheets so at the begining of the code I need the macro to pause so the user can manually select the cell or range that the copied template is to be pasted too... I was thinking an inputbox would work but I am unsure how to write this part of the code.
View 3 Replies View RelatedThe report is a "template" that will be ran once a month every month and will look back at the previous month's data. What i've invisioned is writing a vb script to load on workbook open asking various questions via "inputbox()" method.
SET NOCOUNT ON
DECLARE @StartDate DateTime
DECLARE @EndDate DateTime
SET @StartDate = '20070731 10:10:51.450'
SET @EndDate = '20070731 10:11:51.450'
SET ROWCOUNT 100
SET NOCOUNT OFF
SELECT EventTagName = EventHistory.TagName, Value
FROM EventHistory
INNER JOIN AnalogSnapshot ON EventHistory.EventLogKey = AnalogSnapshot.EventLogKey
INNER JOIN SnapshotTag ON SnapshotTag.SnapshotTagKey = AnalogSnapshot.SnapshotTagKey
WHERE SnapshotTag.TagName IN ('SysSpaceMain')
AND DateTime >= @StartDate
AND DateTime
I have a macro that sends data from excel using MS Outlook. I want to add a more specific Subject header in outlook, and do this using an input box.
I thought adding something like this would work, but it doesn't... (below are just extracts from a very long code...)
Dim CurMonth as String
CurMonth = InputBox("Please enter the reporting month","")
.Subject = "Trial Balance - All companies" & CurMonth
When outlook generates the email, all I get in the subject line is "Trial Balance - All companies"
I am trying to create an inputbox using code from this site:
Sub NumericDataType()
Dim lNum As Long
On Error Resume Next
Application.DisplayAlerts = False
lNum = Application.InputBox _
(Prompt:="Please enter you age.", _
Title:="HOW OLD ARE YOU", Type:=1)
On Error Goto 0
Application.DisplayAlerts = True
If lNum = 0 Then
Exit Sub
Else
MsgBox "You are " & lNum & " years old."
End If
End Sub
I get an error on the first line that says, "Compile error: argument not optional".
I am trying to simply the data input for someone who is not very experienced.
I have had some success but need to have an extra option in case of mistakes.
Ideally I need the following -
I want an inputbox that will appear when the user starts the macro and for example asks Enter Surname
Then I know what I want but I don't know how to do it.
I want a box to display the Surname that the user typed into the inputbox with a message asking Are Details Correct? with a Yes and No Button.
Clicking the Yes button moves onto the next inputbox clicking the No button cancels the whole macro before it enters data into cells.
How to use Exit Sub when I push Cancel with InputBox. Heres my code
VB:
Dim fName As String
Dim strMessage As String
strMessage = "Select .csv File"
MsgBox strMessage
[Code] ....
Its working at the moment when I push cancel, but when I select a csv file to import it comes up with an incompatible error.
In the following code snippet I have worked out a way to verify that the user inputs an Integer and then prompts downstream if an improper value was entered. The user is prompted for a corrected reponse and loops until they get it right. The initial Cancel at the first prompt was causing issues until i saw poster: titarelli use StrPtr(). Except for subsequent cancels, the code works but it is clunky at best. How to tighten this up?
VB:
Dim Quantity As Variant
Dim CorrectedQuantity As Variant
Dim j As Integer
j = 194
Quantity = 0
CorrectedQuantity = 0
[Code] ......
i have a close workbook with path ("Z:42766Jan 2 Dec 2014Tally.ERP9GrpSum.xls") from another open workbook i want to popup a inputbox to select the sheet and run the macro on selected sheet.
e.g
i put 2 in inputbox than run the macro on sheet2
I have a VBA userform with various textbox fields like 'Name' and 'Address' and 'Amount'
I would like an input box to pop up that asks the user to 're-enter for verification'
So that they have to type the same thing twice, to protect against typos
How do I code it so the program compares the inputbox to the textbox and passes only if they are identical?
(or even, using two inputboxes instead if that would be easier)
I am working on a production spreadsheet, and I'm trying to figure out the easiest way for my coworkers to enter data into the system. Each shift, we produce from 5-20 different varieties of chips, and we keep track of how much we've made of each. I've decided that a simple ADD and DEL button at the end of each row will work (unless anyone can think of something easier or better, let me know pls).
Cell G3:G30 is where data will be stored for each variety. The default value for each variety is stored in column C. I found a very basic macro that adds a value to a selected cell, but I wish for it to find the default quantity for the variety in that row (changes day to day as per our schedule), and add it to the value in column G. The DEL button will do just the opposite.
I have 3 worksheets that I need this macro in as well (days, afternoons, midnights), but I don't think that will be any problem. I've searched around for a solution, to no avail.
I have a worksheet, attached, that is a supplier response to a purchase order. Column E contains the original qty ordered of each part number, Column H contains the original price. Now, I've created a quick macro, (in the workbook), that copies the original values to the confirmed values, and the formulas in columns G and J calculate the qty backordered, or flags the part as a price change.
After copying the original PO values to the confirmed values, the supplier would need to go in and make whatever changes are necessary. For example, we ordered 3 and they shipped 0 of a certain part, or the price has changed.
What I would like to do is create a macro that pops up an input box where the supplier enters the Keystone part number, (column A), then enters the new quantity or new price, and those items are automatically changed on the response form. I picture it in the form of 3 input boxes, in the first box the buyer enters a part number. A second box pops up asking if it's a qty change or price change. They would enter the value in a 3rd box, and that value would automatically be changed on the response.