I have different dates in column A, let's say:
10/26/12
11/1/12
11/15/12
2/12/13
I want to say that if the date is <= 12/31/12, put "LEASED IN 12", othwerwise put "LEASED IN 13".
My formula:
=IF($A1<="12/31/12",'LEASED IN 12","LEASED IN 13")
I get only 'LEASED IN 12".
i have a invoice number column and date column and profit column for each job that they do. they may do several jobs in one day. what i want to know is how much they make total for the week. so in a separate column i want a weekending "such and such date" profit total
then i can have this for each person then i can just add up each persons week ending column to see how much i have made for this week. but i only what it to add up the numbers in a set range of dates.
for instance in the week ending 9/4/09 column it should only add profits that go from dates aug 30 to sept 4. and in weekending column 9/11/09 it should only add up profits corresponding to dates between 9/7/09 and 9/11/09
I was wondering if this can be done we have a monthly award program so if a date was entered for that drive on this month it would = no if blank =yes but needs to reset each month?
=IF(AND('Driver'!A51:A1000)="",IF('Driver'!A51:A1000>='Driver Bonus'!A3,"YES","NO")) This brings back a #value! error
=IF(AND('Driver'!A51<=A3,'Driver'!A51>=A3),"NO","YES") this works but only for that cell i need to also recognize cells A51:A1000
=IF(MAX(INDIRECT("'"&A8&"'!A51:A1000"))<A3+1,IF(MAX(INDIRECT("'"&A8&"'!A51:A1000"))<>A3,"YES","NO")) this also works but only for 1 day
I have data, which has an oil well that has had sections of its pipe perforated.
This has all happened on different days throughout the wells life.
I need an equation that says TRUE if the Perforation is the Most Recent for that well.
But I also need it to say True at different Top and Bottom Depth intervals throughout a specific well.
(for example: the last row in this data. Says TRUE even though there are more recent dates in this well.
This needs to say true because this is the most recent perforation in the top and bottom depth interval 9526 to 9536.
The other most recent perforations happened in shallower intervals, ie. 9456 to 9480.
So I need something in the equation that will say true to the most recent start date, if that top and bottom depth interval has not already been selected as true.
I need to have a column that says True IF the start date is the newest (most recent) for each individual well.
Easy enough.. But. I also need this to say True multiple times at different dates for each well.
For example below. it says true on 7/22/2001 three times and then True again on the last row on 10/14/1992.
It has to say true there because this is the most recent perforation that Top_Depth and Bottom_Depth interval.
WELLNAME
TOP_DEPTH
BOTTOM_DEPTH
START DATE
IF most recent Perf
RA-0001
9380
9395
10/14/1992
FALSE
[Code] ......
IF statement?
The error keeps stopping at the "6 for the date 6/30/2008....
I'm trying to determine if one date meets the criteria to be considered 'on time'. I have two columns: estimated completion date and completion date. I want to compare the completion date to the estimated completion date and if completion date is <= completion date but is NOT = 1/1/2099 then I met my date. I've tried this several different ways and problem is I cannot make it work.
When estimated completion date is 1/1/2099 'on time' should be 'no'
When estimated completion date is not 1/1/2099 but is greater than completion date 'on time' should be 'no'
When completion date is <= estimated completion date and estimated completion date is not equal to 1/1/2099 'on time' should be 'yes'
And I have a null date to deal with also but if I can satisfy the first 3 criteria I can manipulate the null values manually.
I am trying to generate a RAG status on an action log. Column K is the start date, Column L is the due/delivery date. I need a formula to bring through the following (i'll use conditional formatting to change "G" to green etc) -
show "R" if past due/delivery date
show "A" if past start date but before delivery date
show "G" if not past start date yet
This is probably really simple, but I've been trying various IF/AND statements and can get the "G" to work but not the rest for some reason. I think i may be using 'TODAY' incorrectly in my formula.
I'm trying to write code so that it uses an offset value depending on criteria. In the attached book I have three coloumns, firstly the date, secondly some letters, an If statement in the third coloumn and another IF statements in the fourth coloumn. I would like a macro that calculates the number of DAYS ONLY, depending on the fourth coloumn. The way it should operate is it should is detect a 1 in the D coloumn and then calculate the difference in days from the adjacent date in coloumn A and subtract from the first time it appears in coloumn A.
For instance in the worksheet, the first 1 in coloumn D is in 'D5'. The date in 'A5' is 04/01/2005. The first time a '1' appears in coloumn C is C2 and its date in 'A2' is 01/01/2005, so 04/01/2005-01/01/2005 is 3 days. Now heres the twist, the next 1 in the D coloumn is in 'D8' and hence the date in A8 is 07/01/2005, now this time the '1' in coloumn C is in 'C7' and hence the new calculation is 07/01/2005-06/01/2005. So hence the 1 in coloumn C is always changing (ie new offset value).
I am preparing a daily report available in sheet1 with the actual input in sheet2 generated through a tool.
The report contain three columns i.e. total cases, Total correction done and Not corrected. From the total cases on a specific date, I need to calculate how many correction have been done and how many are pending.
E.g. 01 January 2013=5 cases are uploaded in the tool.
on 02 January 2013, it was observed that 3 cases were corrected and 2 are pending But 9 cases cases are uploaded on the same day in the tool .
So Total correction done (C3)=3
Not corrected(D3)= 11
It show error, how to correct it .
[Code] ......
=COUNTIFS($K$54:$K$84,">25
View 9 Replies View RelatedSub startrd3_click()
Range("B5:AY64").Select
Selection.Sort Key1:=Range("B5"), Order1:=xlDescending, Key2:=Range("C5") _
, Order2:=xlDescending, Key3:=Range("E5"), Order3:=xlDescending, Header _
:=xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom _
, DataOption1:=xlSortNormal, DataOption2:=xlSortNormal, DataOption3:= _
xlSortNormal
' ERROR CHECKING HAPPENS HERE TO MAKE SURE PEOPLE HAVE NOT PLAYED EACH OTHER BEFORE
Columns("J:W").Select
Selection.EntireColumn.Hidden = True
Range("I4").Select
End Sub
If any of you gamers out there are familiar with the Swiss Pairing System, the goal of this sheet is to perform the pairing functions based on results. The goal of swiss pairing is to partner folks up based on win loss records, however, the players can never play each othe more than once. What i am wondering is how to create the vb code required to make sure the pairings are unique while keeping the rules of swiss pairing together.
Here's how it works:.............
I have Column A with chronological dates. Some of them will be the same. If the dates are the same then the lowest row of those dates would need to add all the corresponding values in column D and print the total to column E
eg.
A1 through A3 = 2/12/2009
D1 through D3 would need to be added
E3 would display total for =d1:d3
it would then do this for each of the dates that match in Column A
In A1 have two words, say "first" and "second" as two lines entered by pressing Alt+Enter after typing the first word. The requirement is remove this formating OR to get these two words separately in single cells. ie B1=First & C1=second.
View 3 Replies View RelatedI am trying to enter the last name "Teh" in a cell. How do I turn off auto spell correction that turns "Teh" into "The"?
View 3 Replies View RelatedI need to step out of a macro based on a user respone, and I don't know how to end this macro if the user needs to correct a cell entry.
If they respond "no", I want to sub to end and select the cell where the correction needs to be made.
I need creating a formula that combines the following if statements in cell C107:
=IF(AND(B107
I am using the following formula to calculate due dates based on the rank i assign an issue.
Note: a similar formula is used for the due date of section one, but if it is not complete, i do not want this formula to kick in a determine the due date for section 2. The formula itself is working fine, but is giving a 'due date' of 1/30/1900. I was wondering if there is a way to not display anything if it has no number to calculate from.
=IF(ISNUMBER(SEARCH("S",D11)),F11+30,IF(ISNUMBER(SEARCH("B",D11)),F11+30,
IF(ISNUMBER(SEARCH("A",D11)),F11+30,IF(ISNUMBER(SEARCH("QNM",D11)),F11+30,""))))
I have a workbook with 2 sheets I want to make an autofilter by two method :
- select case statement
- two dates
I need a hand with a worksheet that we use.
We do a penetration test on soil, write down the values from the machine, then enter into excel and it plots a line graph.
Depending on the values, sometimes a correction is required. This is manually done at the moment.
I would like to have excel do it for us.
I have attached an example of a manual correction I have done as well as the excel calculation worksheet.
There are 2 results given (one at 2.5mm penetration & one at 5.0mm penetration), we calculate both, then use the highest result for the report.
the x value is a constant and the y is a variable.
Attached Files :
Copy of Master WA CBR Worksheet Soaked.xls‎
DOC230714-002.pdf‎
I have the following VBA code and try to sum the range from B2 to CY2 for DA2; then B3 to CY3 for DA3, etc. Therefore I use the for loop. It results in "Application defined or Object defined error".
View 4 Replies View RelatedI'm trying to calculate the sum of rank vlaues in an array formula (required for a Mann-Whitney U-test calc). For example, I have the results of a survey quesiton (1-5 rating) with particpant groups of Sales, Marketing & Other. I want to sum the Ranks of the data points that come from Sales or Marketing (but not Other). The added complexity is in the need to add in the Rank correction value to account for ties.
The conditional arrays are the tricky part. I'm very close, but the array formula is still including the Other values. If I delete those data points the formula works great. For those with strong stomachs, I've copied my latest formula below.
$C$% = "Sales" and $F$5 = "Marketing"...
={SUM(IF('Survey Data'!$D$3:$D$30=$C$5,RANK('Survey Data'!$W$3:$W$30,IF(OR('Survey Data'!$D$3:$D$30=$C$5,'Survey Data'!$D$3:$D$30=$F$5),'Survey Data'!$W$3:$W$30))+(($M115+$N115)+1-RANK('Survey Data'!$W$3:$W$30,IF(OR('Survey Data'!$D$3:$D$30=$C$5,'Survey Data'!$D$3:$D$30=$F$5),'Survey Data'!$W$3:$W$30),0)-RANK('Survey Data'!$W$3:$W$30,IF(OR('Survey Data'!$D$3:$D$30=$C$5,'Survey Data'!$D$3:$D$30=$F$5),'Survey Data'!$W$3:$W$30),1))/2))}
I have this Formula in a excel sheet =IF(AND(COUNT(F12;G12)=2;G12<F12);G12-F12;IF(AND(COUNT(F12;G12)=2;G12>F12);ABS(F12-G12);""))
My problem is that when the result is 0 it just leaves a blank cell without a 0.
Can i correct this so that when the result is 0 it will actually show a 0 in the cell? I can´t put a 0 in the end of the formula because then it shows zeroes in all the cells without information aswell.
I have dates in column A (Source Dates) and Column C (Target Dates). All data is formatted as Dates. I want to find which dates in column A have a matching date in column C. When using the find statement within a For Each loop I can not find a date match unless I format the target dates as General. How can I use the Find Statement using dates without formating the target dates as General?
Option Explicit
Dim SourceDate As Range
Dim TargetDate As Range
Sub FindTargetDate()
Columns("C:C").Select
Selection.NumberFormat = "General"
For Each SourceDate In Range("A1:A32")
'MsgBox SourceDate
Set TargetDate = Sheet1.Range("C1:C7").Find(SourceDate, LookIn:=xlValues)
I am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies View RelatedI am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code:
tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code:
TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click()
Dim Row As Range
Dim FinalRow As Long
Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range
Application.ScreenUpdating = False
[code]....
Windows 7 with Excel 2010
I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:
Code:
Sub testInsert()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim i As Integer
Dim strTest As String
strTest = "test"
[Code] .......
Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:
Code:
Sub testSelect()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim mrs As New ADODB.Recordset
Dim strTest As String
strTest = "test"
[Code] ....
The result I am getting looks like this:
9
8
7
6
5
4
3
2
15
14
13
12
11
10
1
I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.
I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
I am looking to have one formula containing two If Statements that minus.
=IF(B6="investment",C6,0)-IF(B7="gross",C6,0)
So the result of If Statement 1 minus the result of If Statement 2.
What I am seeing at the moment in the cell is FALSE and what I want to see is the sum.
