Turning Off Auto Spell Correction
Jul 8, 2013I am trying to enter the last name "Teh" in a cell. How do I turn off auto spell correction that turns "Teh" into "The"?
View 3 RepliesI am trying to enter the last name "Teh" in a cell. How do I turn off auto spell correction that turns "Teh" into "The"?
View 3 RepliesI am preparing a daily report available in sheet1 with the actual input in sheet2 generated through a tool.
The report contain three columns i.e. total cases, Total correction done and Not corrected. From the total cases on a specific date, I need to calculate how many correction have been done and how many are pending.
E.g. 01 January 2013=5 cases are uploaded in the tool.
on 02 January 2013, it was observed that 3 cases were corrected and 2 are pending But 9 cases cases are uploaded on the same day in the tool .
So Total correction done (C3)=3
Not corrected(D3)= 11
I have different dates in column A, let's say:
10/26/12
11/1/12
11/15/12
2/12/13
I want to say that if the date is <= 12/31/12, put "LEASED IN 12", othwerwise put "LEASED IN 13".
My formula:
=IF($A1<="12/31/12",'LEASED IN 12","LEASED IN 13")
I get only 'LEASED IN 12".
It show error, how to correct it .
[Code] ......
=COUNTIFS($K$54:$K$84,">25
View 9 Replies View RelatedSub startrd3_click()
Range("B5:AY64").Select
Selection.Sort Key1:=Range("B5"), Order1:=xlDescending, Key2:=Range("C5") _
, Order2:=xlDescending, Key3:=Range("E5"), Order3:=xlDescending, Header _
:=xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom _
, DataOption1:=xlSortNormal, DataOption2:=xlSortNormal, DataOption3:= _
xlSortNormal
' ERROR CHECKING HAPPENS HERE TO MAKE SURE PEOPLE HAVE NOT PLAYED EACH OTHER BEFORE
Columns("J:W").Select
Selection.EntireColumn.Hidden = True
Range("I4").Select
End Sub
If any of you gamers out there are familiar with the Swiss Pairing System, the goal of this sheet is to perform the pairing functions based on results. The goal of swiss pairing is to partner folks up based on win loss records, however, the players can never play each othe more than once. What i am wondering is how to create the vb code required to make sure the pairings are unique while keeping the rules of swiss pairing together.
Here's how it works:.............
In A1 have two words, say "first" and "second" as two lines entered by pressing Alt+Enter after typing the first word. The requirement is remove this formating OR to get these two words separately in single cells. ie B1=First & C1=second.
View 3 Replies View RelatedI need to step out of a macro based on a user respone, and I don't know how to end this macro if the user needs to correct a cell entry.
If they respond "no", I want to sub to end and select the cell where the correction needs to be made.
I need a hand with a worksheet that we use.
We do a penetration test on soil, write down the values from the machine, then enter into excel and it plots a line graph.
Depending on the values, sometimes a correction is required. This is manually done at the moment.
I would like to have excel do it for us.
I have attached an example of a manual correction I have done as well as the excel calculation worksheet.
There are 2 results given (one at 2.5mm penetration & one at 5.0mm penetration), we calculate both, then use the highest result for the report.
the x value is a constant and the y is a variable.
Attached Files :
Copy of Master WA CBR Worksheet Soaked.xls‎
DOC230714-002.pdf‎
I have the following VBA code and try to sum the range from B2 to CY2 for DA2; then B3 to CY3 for DA3, etc. Therefore I use the for loop. It results in "Application defined or Object defined error".
View 4 Replies View RelatedI'm trying to calculate the sum of rank vlaues in an array formula (required for a Mann-Whitney U-test calc). For example, I have the results of a survey quesiton (1-5 rating) with particpant groups of Sales, Marketing & Other. I want to sum the Ranks of the data points that come from Sales or Marketing (but not Other). The added complexity is in the need to add in the Rank correction value to account for ties.
The conditional arrays are the tricky part. I'm very close, but the array formula is still including the Other values. If I delete those data points the formula works great. For those with strong stomachs, I've copied my latest formula below.
$C$% = "Sales" and $F$5 = "Marketing"...
={SUM(IF('Survey Data'!$D$3:$D$30=$C$5,RANK('Survey Data'!$W$3:$W$30,IF(OR('Survey Data'!$D$3:$D$30=$C$5,'Survey Data'!$D$3:$D$30=$F$5),'Survey Data'!$W$3:$W$30))+(($M115+$N115)+1-RANK('Survey Data'!$W$3:$W$30,IF(OR('Survey Data'!$D$3:$D$30=$C$5,'Survey Data'!$D$3:$D$30=$F$5),'Survey Data'!$W$3:$W$30),0)-RANK('Survey Data'!$W$3:$W$30,IF(OR('Survey Data'!$D$3:$D$30=$C$5,'Survey Data'!$D$3:$D$30=$F$5),'Survey Data'!$W$3:$W$30),1))/2))}
I have this Formula in a excel sheet =IF(AND(COUNT(F12;G12)=2;G12<F12);G12-F12;IF(AND(COUNT(F12;G12)=2;G12>F12);ABS(F12-G12);""))
My problem is that when the result is 0 it just leaves a blank cell without a 0.
Can i correct this so that when the result is 0 it will actually show a 0 in the cell? I can´t put a 0 in the end of the formula because then it shows zeroes in all the cells without information aswell.
I have is that the code does call the spell-check up and it goes through the motions.
However, when you perform this manually (as in from the toolbar), the spell-check accepts the items as you put in the text bar at the top if you change it.
When doing it via the VBA macro code, it will not accept the user amended-suggestions unless you highlight the (top) text bar area/row/cell to get it to accept some things - otherwise it just accepts the suggestion the checker gives n the section below - not the text you have amended.
I want to know about how to spell the numbers in words
View 3 Replies View RelatedI have initiated a spell-check in VBA using:
View 14 Replies View RelatedI was modifying some code in a script and now every piece of code that was like this:
View 4 Replies View RelatedHow can I get excel to always perform a spell check before I close the document. I've tried using VBA but it won't execute. (I'm really bad at VBA.) This is what I tried but it wouldn't work:
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Cells.CheckSpelling SpellLang:=1033
End Sub
I am using Excel 2003 and have a column within my spreadsheet that, through a formula, inserts a decimal that has formatting to show as a percent. I would like to know who to convert that number to words. I saw spellnumber (and love it!) but don't know how to edit it so that it converts properly.
View 9 Replies View Relatedwhy I would be having trouble using the following formula in excel. Its purpose is to spell a number in english with dollars and cents. I have used the formula before and it has worked just fine, but now the formula will only give me " NAME".
Option Explicit
'Main Function
Function SpellNumber(ByVal MyNumber)
Dim Dollars, Cents, Temp
Dim DecimalPlace, Count
Redim Place(9) As String
Place(2) = " Thousand "
Place(3) = " Million "
Place(4) = " Billion "
Place(5) = " Trillion "
' String representation of amount.
MyNumber = Trim(Str(MyNumber))
' Position of decimal place 0 if none.
DecimalPlace = InStr(MyNumber, ".")
' Convert cents and set MyNumber to dollar amount.
If DecimalPlace > 0 Then
Cents = GetTens(Left(Mid(MyNumber, DecimalPlace + 1) & _
"00", 2))
MyNumber = Trim(Left(MyNumber, DecimalPlace - 1))
End If
I had entered a spellnumber function in Excel 2007 and it was working fine but then all the sudden it disappeared. I would prefer a function to convert numbers to text without doing visual basic code.
View 7 Replies View Related
I have a set of text boxes in my sheet. I was wondering if there is a way to perform a spell check on the textboxes only (not the cells in the worksheet).
I have tried searching the code on the forum, found some which are using 'MSForms.TextBox', dont know why I am getting error.
How to perform the operation using Oleobject.
How to convert a numeric value into Bulgarian words in Excel?
View 1 Replies View RelatedI am working on code breaking, and am working on trying multiple letter combinations, and was wondering if I could spell check the results and have that identify letter combinations that ARE words.
I am using the following VBA to spell numbers in arabic words ! however , the solution resulted to having the numbers spelled to ASCII codes ..
Public Function SFormatNumber(ByVal x As Double) As String
Dim Letter1, Letter2, Letter3, Letter4, Letter5, Letter6 As String
Dim C As String
[Code]....
How can I get excel to always perform a spell check before I close the document. I've tried using VBA but it won't execute. (I'm really bad at VBA.) This is what I tried but it wouldn't work:
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Cells.CheckSpelling SpellLang:=1033
End Sub
I need to have a spell number function such that if I have a collumns with a figure and abbreviated currency as below
USD 953,681.67
EUR 953,681.67
GBP 953,681.67
The function SpellNumber would display as
US Dollars Nine Hundred and Fifty Three Thousand Six Hundred and Eighty One and Sixty Seven Cents Only
Euros Nine Hundred and Fifty Three Thousand Six Hundred and Eighty One and Sixty Seven Cents Only
Great British Pounds Nine Hundred and Fifty Three Thousand Six Hundred and Eighty One and Sixty Seven Cents Only
Any function that I can append as Macro in Excel and output depends on Currency.I should also be able to edit Macro to add additional currencies as I wish.
Is it possible to use spell check on a protected sheet?
View 9 Replies View RelatedWe're setting up a test for candidates in an Excel 2010 workbook and want to get a sense of their native ability to spell. We'd like to disable spell check for the entire workbook. I've looked in Options>Proofing, even tried removing the dictionary, but haven't found a way to completely disable spell check from working. Is it possible to achieve? We'd settle for being able to disable spelling within a textbox.
View 7 Replies View RelatedI have this annoying problem with my excel 2003. And i have no clue at all how to solve this.
Each time i write 2.5 it turns into 02.may. Does any one know how i can fix this?
I fill out this form everyday and sometimes need to type "S" and every time it fills in "Sampling Rate #1" because that's what it says in the same column higher up. Is it possible to turn this off somehow?
View 3 Replies View Related