I am using the following code to delete all of the series in the chart. It is give type mismatch error.
Sub allchannelchart()
Dim i As Integer, s As SeriesCollection
ActiveSheet.ChartObjects("allchan").Activate
'ActiveChart.PlotArea.Select
For Each s In ActiveChart.SeriesCollection
s.Delete
Next s
The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
I need to plot multiple series in a scatterplot. The problem is that the number of series is user-defined. And also, the number of data poitns in each series is different. I've looked it up already, but a lot of the examples i've seen don't account for the fact that I need to run through a loop and add series into my graph.
In other words, i need a way to select a certain range each time it runs through the loop, and add the data as a series into the chart. Also, the user enters how many series there are, so I use that as a counter
What I want to achieve is a script that would create a new scatter plot of multiple series from a selected block of cell. I found a thread that was similar but what is different from my data is that my x values are different for each series.
The format of the data is in the following format, the first series will the first x,y pair, the 2nd series would be the second x,y pair. I don't know if it'll be an issue but one thing is that the date might be different lengths. For instance, the 3rd series, only has 4 data points, whereas the other series contains 6 data points?
x0.200.400.600.801.001.20
y5.002.501.671.251.000.83
x0.100.200.300.500.701.30
y5.002.501.671.000.710.38
x0.100.300.400.50
y6.672.221.671.33
So essentially, is there a way I can have the script say, select your range, and then graph the selected range as a scatter plot?
I have a spreadsheet (see attached) in which there are many series and i want to be able to delete most of the series except the first 4.
(The 0%, 5% 10% air voids and the 95% comp line)
iv got this code, which is attacted to a command button, which works fine to delete all the series but makes the graph a blank white box. id prefer it so it delete just the series not the graph "picture?" ...
My friend has set up an excel workbook with a sheet for every month (labelled Jan graphs, Feb graphs, Mar graphs etc) which has 7 pie charts per sheet. The problem is the pie charts are showing the 0% fields and the data labels are overlapping. I have found a macro that gets rid of the 0% labels but I need to repeat the macro for all the 7 charts on each sheet and all 12 worksheets for each month of the year. I am very new to VBA and coding of any type and have looked but can't find the solution.
The macro I am currently using for "Chart1" on "Jan graphs" is below. The charts are labelled Chart1, Chart2, Chart3 etc.
Sub ClearLabels()
Worksheets("Jan graphs").ChartObjects("Chart 1").Chart.ApplyDataLabels _
Type:=xlShowLabelAndPercent
For Each x In Worksheets("Jan graphs").ChartObjects("Chart 1"). _
Chart.SeriesCollection(1).Points
I need to plot various data on top of stock charts.
This data could be irregular in date: it could be weekly, or simply random.
To plot this data by itself requires a Scatter Chart.
From what I know so far, you CANNOT DO THIS.
However, I suspect this could be done if I build a Stock Chart from scratch using a Scatter Chart.
Error bars can be used to make the tails, however, I don't know how they built the body bar which has the characteristics of a bar (border, and interior.)
But since I don't really need those two characteristics, I just need a wider error bar line that is provided in the chart edit window. I'm guess through a macro, there are wider line widths assignable.
I would like combine (overlay) a bubble chart with a connected point scatter chart. I understand that, without VBA, this is not possible. However, I understand that, by using VBA, the markers of a scatter chart can be configured as circles with their size proportional to values in a specified column. This pseudo-bubble chart can then easily be combined with a connected point scatter chart.
My question is: does anyone have any VBA code to share that shows how to configure a scatter chart as the type of pseudo-bubble chart described above.
Any way to be able to toggle (checkbox) a particular series in a chart.
I found this old thread that shows a simple method: [URL]
BUT, I do not want the series to appear in the legend if it is not plotted.
how to create a new XYScatter series based on dynamic conditions. For example, I have a very large, unsorted table with three columns: TGT, X, Y, Z.
TGT is an integer from 1-99 and is being filtered dynamically with an Advanced Filter. Anywhere from 0 to 10 conditions are being filtered by the Advanced Filter.
I would like to create a new series for each unique instance of TGT, with or without filtering.
I would like to combine / overlay a bubble chart and scatter chart with straight connectors.
I understand that, without VBA, it is not possible to combine a bubble chart with a scatter chart.
Unfortunately, I am a VBA newbie, and so I cannot write my own code (though I can usually adapt code to my specific environment).
My question is: does anyone have VBA code to share that will convert a scatter chart series (x,y data in 2 columns) to a bubble-style chart (bubble radius in 3rd column)?
I run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
I have the following code:
Sub Macro5()
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveChart.SeriesCollection(1).Delete
ActiveChart.SeriesCollection(2).Delete
End Sub
However, if there is no SereisCollection(1) actually present in the chart I get an error. How can I work around this? I will need an IF statement I assume, just not sure what it will look like.
I just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
I have received following macro from someone to delete series but the problem is that it gives error when some sheets are protected, and I want those sheets to protected. When run it will ignore/leave protected sheets but delete series only from unprotected sheets
Private Sub CommandButton1_Click()
Dim Rng As Range, i As Long, r As Range, lVal, uVal
Dim DeleteCount As Double
Dim lRow As Long
Dim dr As Long
Dim dc As Long
dc = Sheets("Deleted Numbers").UsedRange.Columns.Count - 1
dr = Cells(Rows.Count, Sheets("Deleted Numbers").UsedRange.Columns.Count - 1).End(xlUp).Row + 1
If dr = 60001 Then ................
I have a list of data on one sheet and a 'reports' page on another sheet. The reports page has several pivot tables and a pivot chart. I want the pivot chart to format the bars on the chart relevant to the series name. The series names are "R" "A" amd "G" for Red Amber and Green respectively, I want the chart to change the colour of the series so that it is the correct colour ie. "R" would be coloured Red, "A" would be Amber and "G" would be green.
Sub PivotLoader()
Dim Red As Integer
Dim Amber As Integer
Dim Green As Integer
Red = Range("H9").Value
Amber = Range("H10").Value
Green = Range("H11").Value
Range("B8").Select
ActiveSheet.PivotTables("PivotTable4").PivotCache.Refresh
Range("D25").Select
ActiveWindow.SmallScroll Down:=18
Range("B49").Select...........................
I'll attempt to explain what I'm hoping to do. I have a column of data that I want to plot out into a chart. For example the data points might run from -1.50 to 2.5.
Let's say there are 20 data points in the column and they are spaced thruout the range shown above. They tend to cluster amoung themselves into 2 or 3 distict groups.
I want to first produce one horizontal bar that runs from the -1.50 to 2.5 overall range and secondly, I want to overlay a scatter chart horizontally over the bar showing where the data points lie within the range and also so I can visually see the clusters of points.
With the data residing in a column, when I generate the scatter chart, the points are laying verticle within the chart and spreadout horizontally. I can manually get what I want by narrowing the chart down to the point that the points lie on a straight vertical line, but I haven't been able to figure out how to "rotate" the chart 90 deg to overlay the scatter points within the bar chart.
Naturally, the optimum solution would be such that I could generate the charts originally and then allow the spreadsheet to generate the new charts as we modify the data values, etc.
I would like to have two series of data using the same X axis (date, formatted in months). The Y axis is in intervals of 100,000.
The first data series is historical (actual) data (i.e. Jan 2009 to August 2011). The second data series is forecast (Sept 2011 - August 2012). So i want the forecast series to start immediately after the historical series. It is a 'line with markers' chart. The key objective is that the forecast data looks visually distinct from the historial series.
Excel version: Excel 2010
OS: Windows 7
I'm using the following code to set the colours of the slices of all the pie charts in my spreadsheet based on each slice's legend's label: ....
View 9 Replies View RelatedCharting query:
Data: starting from row1
Column A Column B Column C
Supplier Sales Rating
Sup1 100 5
Sup2 100 3
sup3 65 5
sup4 80 4
Column B (Sales) is the X Axis and
Column C (Rating) IS THE Y Axis
Query:
On the Scatter chart when I want to show data Labels or when I hover the Mouse over the Points (100,5), for example, how do I get the corresponding Supplier Name to show as well ?
I would like to avec an X Y scatter in radar chart, not the usual line chart... Is this possible?
View 1 Replies View Relatedlable my entries in my scatter chart:
Heres an example:
For my series 1:
I have,
_________X________Y
Brown ____1.5 ______0.1
Black _____1.2______ 0.5
White____ 1.9 _______0.2
Red ______1.1 _______0.9
Yellow____ 2.0 _______0.4
Green _____1.8 _______0.7
Now the Colors are the lables I need to put in each x and y data.
.ChartType = xlColumnClustered
plots a chart with stacked columns. So i was wondering what the chart type i should specify to get a simple scatter chart.
The attached file has a scatter chart in which all of the data is properly displayed except the X axis. How can I get my X axis to reflect the data I have selected?
View 2 Replies View RelatedI have 200+ XY pairs I want to chart and see a visual representation of their distribution. Then I want to cursor over exceptional points and see their identity. I don't need (nor want) data labels, disparate markers, nor a legend. I just want the points scattered on the xy plane. Also, the data set changes depending on user-controllable filter criteria.
There are two problems:
1. If I build it through the wizard as a single data series, everything is fine except that the charting process seems to replace the X value of the XY pair with a sequence number once I swap in a new data set, and ...
2. I seem to loose the individual point identities for cursor-over purposes.
The only solution I can think of for these issues is making each XY pair a one-point Series, but that's a hugely laborious way to do it. If that's it though, is there a way to globally load the independent data series and set every data point marker and color to be the same?
However, if I could do it as a single series, then I still have the issues above. Is there a way to prevent Excel from converting the X values to sequence numbers once a new data set is swapped in, and is there a way to identify the individual points for cursor-over?
I'm trying to create a very simple map.
I've got three columns.
Member, X, Y
Naturally, the first column contains someone's name.
The other columns contain XY coordinates.
These coordinates start at 375 and end at 499 on both axes.
I'm needing the points to show the member name and xy coordinates in the popup when hovering over the point.
How do I accomplish this?
Here's some sample data.
MEMBER X Y
JOE 397 397
JIM 421 384
JANE 467 406
JEFF 389 395
I have downloaded a file called "scroller.xls" under the section "Excel charts". The file was made by Andy Pope and shows how to make a graph dynamic by combining Named Ranges and a scroll bar.
My chart is actually XY scatter chart with data points connected with smooth lines. I followed but when I start scrolling, the data points (smooth lines) got "eaten up" as I move.
I tried line chart and it works perfectly.
Does scrollbar work for XY scatter chart? Is there a different formula for XY scatter chart?
And I want the chart to be in new sheet, but I couldn't put the scrollbar in new sheet. I would like to know if it is possible when the chart is located in new sheet because my chart is quite large.
I have a series of X-Y Data (0-10 in both axis) that I want to overlay on an area chart to show outliers outside of an accepted condition. I have been able to create the area chart and the scatter chart separately but when I try to combine them the axis gets messed up. I tried using a secondary axis but I am not that skilled
I have attached the data and my feeble attempts at creating this chart.
I would like to use multiple scatter plots and bar charts in one chart. Problem is that X-Axis goes horribly wrong every time, even if I have same points on both scatter and bar. Here is Data for 2 Scatter Plots
XScatter1
1,43 0,14
2,60 0,25
3,04 0,37
3,60 0,50
3,93 0,60
4,69 0,80
X Scatter2
5,10 0,92
5,36 1,00
6,43 1,26
7,60 1,53
8,19 1,65
8,79 1,77
9,69 1,93
And here is data for 2 Bar Charts
XBar Chart1Bar Chart2
1,43#N/A 0,00
2,60#N/A 0,01
3,040,01 0,01
3,60#N/A 0,01
3,93#N/A 0,01
4,69#N/A 0,00
5,100,02 0,01
5,36#N/A 0,01
6,43#N/A 0,02
7,600,04 0,02
8,19#N/A 0,01
8,790,11 0,02
9,69#N/A 0,01
I start with Scatterplot and put those in the graph, then I add other data and change it to Bar Chart, but this is the point where X-Axis gets mixed up and scatter plot X data and Bar chart X data are not matching.
I have some data where I am plotting cumulative M events versus time (blue). I would like to make a tick mark, or dot or something to indicate when event N (pink) occurs on the blue line. Imagine that I am measuring eating (M) versus time and that I want to show on that line the points when food is delivered (N). this is the plot I desire (ive shown some ticks and dots as examples, how can i do either one?): http://www.yousendit.com/transfer.ph...2F360E1F246391 and this is my data/current plot: http://www.yousendit.com/transfer.ph...27974E102C0620
View 2 Replies View Related