Change X Axis Of Scatter Chart

Jun 1, 2009

The attached file has a scatter chart in which all of the data is properly displayed except the X axis. How can I get my X axis to reflect the data I have selected?

View 2 Replies


ADVERTISEMENT

Formatting X Axis On Scatter Plot Chart

Jul 27, 2007

Attached is a chart I am trying to create. So basically, I originally used a line chart but it didn't have the flexibility of the scatter chart, but i am having a very hard time formatting the X axis. First of all - I would like the line in the middle at the 0% point to actually go to the bottom so that the x axis labels aren't in the middle of the graph. Second the x axis labels aren't showing up correctly. They should be quarters: 1Q:02, 2Q:02, 3Q:02, 4Q:02... Finally, how can I show the correlation between these two data points plotted - the R-squared. THANKS!!! Auto Merged Post;I actually was able to figure out most of what I asked. What is remaining: how do I calculate the R-Squared on the chart? Isn't there a way to do it automatically in excel on the chart.

View 3 Replies View Related

Bar Chart With Dropdown Box To Change X Axis

May 6, 2014

Please see the attached workbook.

I would like to create a bar chart which is linked to a drop down box (from data validation) that allows me to choose of the 3 sets of data to show in the x axis.

So if i choose "HALF YEAR", the bar chart will have two bars (one is "jan-jul" the other is "jul-dec") with the green section data if i choose "QUARTER YEAR", the bar chart will have four bars ("jan-mar", "apr-jun", "jul-sep", "oct-dec") with the blue section data if i choose "INDIVIDUAL MONTHS" i have twelve bars....with the red section data.

View 2 Replies View Related

Change X-axis Labels On Pivot Chart?

May 15, 2014

I have a data set where a number of pieces of technology are listed in rows. For each piece of technology it can relate to a "Network" or a "Terminal" and the columns are yes/no as follows:

Tech Network? Terminal?

Tech 1 Yes No
Tech 2 Yes Yes
Tech 3 No No
Tech 4 No Yes

When I plot this on a pivot chart, I get the attached chart, where the x-axis relate to the hierarchies, i.e. Yes/Yes, Yes/No, No/Yes or No/No. As you can imagine, this is not very useful for the viewer as it's not clear what the yeses and nos refer to. It would be much better if I could rename the axis labels: "both"; "network only"; "terminal only"; or "neither".

Is this possible? And is there a solution that doesn't require me to change the source data? I'm happy to use a power pivot if that would make things easier.

View 1 Replies View Related

Change Chart Axis Font Color With A Checkbox

Aug 22, 2014

Any way to change the font color of a chart axis when a checkbox is set to true.

let checkbox be checkbox5 and chart be chart5. What I would like to happen is that if checkbox5 is true then the font color of the horizontal axis changed to grey (RGB 166,166,166), if it is false then I would like the font color of the horizontal axis to be black (RGB 0,0,0). I also would like this macro to be run every time the checkbox changes, or the corresponding cell changes to TRUE or FALSE (it is in another sheet, say sheet2). This is the code I have so far but all it is doing is showing the chart as selected and not changing the font color. I would also like it to not physically select the chart, this is for a dashboard so the selecting of the chart throws off some of the visuals a bit, but not sure how to do change the chart values without selecting it.

[Code] ......

View 7 Replies View Related

Stacked Chart - Change Bar Colors Based On Date (X Axis)

Apr 19, 2014

I am wanting the colors of the bars in a stacked chart to change based on the date in the X Axis. As the current date arrives, the stacked bar needs to change to various blue shades. If the date is in the future, the stacked bar needs to be various grey shades.

View 2 Replies View Related

Excel 2010 :: Cannot Change Chart X-axis To Display Date Values

Nov 27, 2012

Example attached : Copy of CAB.xlsx

View 2 Replies View Related

Labeling X-axis On X Y Scatter?

Apr 16, 2014

I've got two columns of information plotted against one another in an x,y scatter. I need the x-axis to reflect each of the 42 numbers I've added in the column and not a preset or fixed range of numbers. (I need to see the actual number that I assigned each x-plot point on the x-axis and not on the plot point itself).

View 2 Replies View Related

Scatter Graph X Axis Grouping

Feb 28, 2008

I would like to graph the data shown below using a scatter graph. However, when I use the cart wizard it assigns numerical values to each data point and then plots the data accordingly. How can I get the scatter graph to group the assets with the same ratings together? Note, I don't want to have to assign values to assets with the same rating each time. I have attached the spreadsheet so you an see the problem.

View 5 Replies View Related

Category X Axis Labels On Scatter Graph

Apr 4, 2007

I have a set of data which I need to plot both unordered and ranked.

For the unordered (as is) data, a line graph is fine, as it gives the category labels along the x axis.

For the ordered data, i have a row with the ranking in, and then plot an xy scatter graph, so the values increase.

This obviously has the rank numbers along the x axis, not the corresponding category labels.

Is there anyway to force this? I know there are chart labelling add-ins on here, but our IT dept blocks the download.

The attched file is a very small example.

View 7 Replies View Related

Create Chart With Names In Vertical Axis And Values In Horizontal Axis?

Mar 1, 2014

I have a spreadsheet with golfers handicaps, golfers names down the left in column A in rows 3-35. Row 2 has the event numbers titles 1 to 18 (18 events in a year). i need a graph that has the person as the vert axis and the horizontal axis needs to be the event numbers, so i can read down for the person and across to see how there handicaps change from each different event. i have attached the data below.

View 1 Replies View Related

Draw Log Chart Or Edit Axis Intervals And Starting Axis Value

Apr 20, 2007

I have some numeric data that has to be put on a log chart. but there is no option for log charts. so i converted my data to log and then drew a chart but i am unable to edit the axis intervals and starting axis value. whenever i change the value it gets back to its default value,ie 1. can anyone tell me how to draw log chart or how to edit axis intervals and starting axis value?

View 6 Replies View Related

Excel 2003 :: Daily Stock Chart AND Random Scatter Chart Data

Jan 14, 2014

I need to plot various data on top of stock charts.

This data could be irregular in date: it could be weekly, or simply random.

To plot this data by itself requires a Scatter Chart.

From what I know so far, you CANNOT DO THIS.

However, I suspect this could be done if I build a Stock Chart from scratch using a Scatter Chart.

Error bars can be used to make the tails, however, I don't know how they built the body bar which has the characteristics of a bar (border, and interior.)

But since I don't really need those two characteristics, I just need a wider error bar line that is provided in the chart edit window. I'm guess through a macro, there are wider line widths assignable.

View 5 Replies View Related

Combine (Overlay) Bubble Chart & Point Scatter Chart

Jun 30, 2009

I would like combine (overlay) a bubble chart with a connected point scatter chart. I understand that, without VBA, this is not possible. However, I understand that, by using VBA, the markers of a scatter chart can be configured as circles with their size proportional to values in a specified column. This pseudo-bubble chart can then easily be combined with a connected point scatter chart.

My question is: does anyone have any VBA code to share that shows how to configure a scatter chart as the type of pseudo-bubble chart described above.

View 2 Replies View Related

Second Category Axis & Value Axis To Current Chart

Sep 27, 2006

how to incorporate another category and value axis to my existing chart.

1. I need to add a rank axis derived from my data column (C6-C15). This column should rank from highest to lowest and create a tie if any number is repeated. I have arranged the rank column in cells B38:L38 as they would appear. I would like this to appear on the top or bottom of the bar graphs.

2. Second I need to add the frequency of hits which = 3 derived from cell J1 This should appear on the chart were it is currently titled. This should create another bar graph colored green and labeled 3.

3. Lastly the numbers axis can remain the same as it appears on the chart or if it would be better to align as shown in cells B43:L43.

View 5 Replies View Related

Horizontal And Vertical Chart Axis As Value Axis

Jan 26, 2008

What is the best way to have both horizontal and vertical axis as value axis?

View 2 Replies View Related

Convert Scatter Chart To Bubble Chart

Jun 28, 2009

I would like to combine / overlay a bubble chart and scatter chart with straight connectors.

I understand that, without VBA, it is not possible to combine a bubble chart with a scatter chart.

Unfortunately, I am a VBA newbie, and so I cannot write my own code (though I can usually adapt code to my specific environment).

My question is: does anyone have VBA code to share that will convert a scatter chart series (x,y data in 2 columns) to a bubble-style chart (bubble radius in 3rd column)?

View 2 Replies View Related

Bar Chart And Overlaying Scatter Chart

Mar 9, 2007

I'll attempt to explain what I'm hoping to do. I have a column of data that I want to plot out into a chart. For example the data points might run from -1.50 to 2.5.

Let's say there are 20 data points in the column and they are spaced thruout the range shown above. They tend to cluster amoung themselves into 2 or 3 distict groups.

I want to first produce one horizontal bar that runs from the -1.50 to 2.5 overall range and secondly, I want to overlay a scatter chart horizontally over the bar showing where the data points lie within the range and also so I can visually see the clusters of points.

With the data residing in a column, when I generate the scatter chart, the points are laying verticle within the chart and spreadout horizontally. I can manually get what I want by narrowing the chart down to the point that the points lie on a straight vertical line, but I haven't been able to figure out how to "rotate" the chart 90 deg to overlay the scatter points within the bar chart.

Naturally, the optimum solution would be such that I could generate the charts originally and then allow the spreadsheet to generate the new charts as we modify the data values, etc.

View 9 Replies View Related

Show Missing Values In Pivot Chart (line Chart) Axis?

Apr 18, 2013

How can I add missing values to the axis in a pivot chart line chart? I have a numerical X-axis with values such as 0,1,5,8,14, etc. I have another set of Y values that correspond to the X values. If this was an XY-scatter plot I'd be able to plot X vs. Y and connect the dots for "gaps" in the X values. Since it's a pivot chart I cannot use an XY-scatter plot, I can only use a line chart. The line chart doesn't give me the ability to add the "missing" values, so it gives the impression that my data is more closely packed than it is. The data source is external to my spreadsheet, so I cannot add the values before creating the pivot table/chart.

View 1 Replies View Related

Scatter Chart

Jan 31, 2007

Charting query:

Data: starting from row1
Column A Column B Column C
Supplier Sales Rating
Sup1 100 5
Sup2 100 3
sup3 65 5
sup4 80 4

Column B (Sales) is the X Axis and
Column C (Rating) IS THE Y Axis

Query:
On the Scatter chart when I want to show data Labels or when I hover the Mouse over the Points (100,5), for example, how do I get the corresponding Supplier Name to show as well ?

View 10 Replies View Related

X Y Scatter In Radar Chart

Feb 26, 2014

I would like to avec an X Y scatter in radar chart, not the usual line chart... Is this possible?

View 1 Replies View Related

XY Scatter Chart Labels

Sep 27, 2008

lable my entries in my scatter chart:

Heres an example:

For my series 1:

I have,
_________X________Y
Brown ____1.5 ______0.1
Black _____1.2______ 0.5
White____ 1.9 _______0.2
Red ______1.1 _______0.9
Yellow____ 2.0 _______0.4
Green _____1.8 _______0.7

Now the Colors are the lables I need to put in each x and y data.

View 9 Replies View Related

Simple Scatter Chart

Jun 16, 2006

.ChartType = xlColumnClustered

plots a chart with stacked columns. So i was wondering what the chart type i should specify to get a simple scatter chart.

View 2 Replies View Related

XY Scatter Chart With Real X Values

Jul 26, 2009

I have 200+ XY pairs I want to chart and see a visual representation of their distribution. Then I want to cursor over exceptional points and see their identity. I don't need (nor want) data labels, disparate markers, nor a legend. I just want the points scattered on the xy plane. Also, the data set changes depending on user-controllable filter criteria.

There are two problems:
1. If I build it through the wizard as a single data series, everything is fine except that the charting process seems to replace the X value of the XY pair with a sequence number once I swap in a new data set, and ...
2. I seem to loose the individual point identities for cursor-over purposes.

The only solution I can think of for these issues is making each XY pair a one-point Series, but that's a hugely laborious way to do it. If that's it though, is there a way to globally load the independent data series and set every data point marker and color to be the same?

However, if I could do it as a single series, then I still have the issues above. Is there a way to prevent Excel from converting the X values to sequence numbers once a new data set is swapped in, and is there a way to identify the individual points for cursor-over?

View 9 Replies View Related

Scatter Chart To Create A Map (of Sorts)?

Oct 7, 2009

I'm trying to create a very simple map.

I've got three columns.
Member, X, Y

Naturally, the first column contains someone's name.
The other columns contain XY coordinates.
These coordinates start at 375 and end at 499 on both axes.

I'm needing the points to show the member name and xy coordinates in the popup when hovering over the point.

How do I accomplish this?

Here's some sample data.

MEMBER X Y
JOE 397 397
JIM 421 384
JANE 467 406
JEFF 389 395

View 9 Replies View Related

Delete All Series In XY Scatter Chart

Aug 1, 2006

I am using the following code to delete all of the series in the chart. It is give type mismatch error.

Sub allchannelchart()
Dim i As Integer, s As SeriesCollection
ActiveSheet.ChartObjects("allchan").Activate
'ActiveChart.PlotArea.Select
For Each s In ActiveChart.SeriesCollection
s.Delete
Next s

View 2 Replies View Related

Create Scrolling Xy Scatter Chart

Jun 27, 2008

I have downloaded a file called "scroller.xls" under the section "Excel charts". The file was made by Andy Pope and shows how to make a graph dynamic by combining Named Ranges and a scroll bar.

My chart is actually XY scatter chart with data points connected with smooth lines. I followed but when I start scrolling, the data points (smooth lines) got "eaten up" as I move.

I tried line chart and it works perfectly.

Does scrollbar work for XY scatter chart? Is there a different formula for XY scatter chart?

And I want the chart to be in new sheet, but I couldn't put the scrollbar in new sheet. I would like to know if it is possible when the chart is located in new sheet because my chart is quite large.

View 9 Replies View Related

Basic Chart: Set A Chart Up With The Time Been On The X - Axis

Aug 1, 2007

I got a set of data which is only 2 colums collecting data problems. The output i get is a time stamp and a fault. Im looking to set a chart up with the time been on the X - axis and number of problems per hour on the Y - axis.

View 7 Replies View Related

Combining Area And Scatter Data Into Chart?

May 16, 2014

I have a series of X-Y Data (0-10 in both axis) that I want to overlay on an area chart to show outliers outside of an accepted condition. I have been able to create the area chart and the scatter chart separately but when I try to combine them the axis gets messed up. I tried using a secondary axis but I am not that skilled

I have attached the data and my feeble attempts at creating this chart.

View 2 Replies View Related

Using Multiple Scatter Plots And Bar Charts In One Chart

Feb 8, 2014

I would like to use multiple scatter plots and bar charts in one chart. Problem is that X-Axis goes horribly wrong every time, even if I have same points on both scatter and bar. Here is Data for 2 Scatter Plots

XScatter1
1,43 0,14
2,60 0,25
3,04 0,37
3,60 0,50
3,93 0,60
4,69 0,80
X Scatter2
5,10 0,92
5,36 1,00
6,43 1,26
7,60 1,53
8,19 1,65
8,79 1,77
9,69 1,93

And here is data for 2 Bar Charts

XBar Chart1Bar Chart2
1,43#N/A 0,00
2,60#N/A 0,01
3,040,01 0,01
3,60#N/A 0,01
3,93#N/A 0,01
4,69#N/A 0,00
5,100,02 0,01
5,36#N/A 0,01
6,43#N/A 0,02
7,600,04 0,02
8,19#N/A 0,01
8,790,11 0,02
9,69#N/A 0,01

I start with Scatterplot and put those in the graph, then I add other data and change it to Bar Chart, but this is the point where X-Axis gets mixed up and scatter plot X data and Bar chart X data are not matching.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved