I'm trying to apply an autofilter to do the ol' "delete visible lines that meet criteria" trick. Unfortunately my vb macro, although applying the string correctly, hides all of the lines...
This is the part of code relevant to filtering (i'm trying to filter on column M which is 13):
I have a spreadsheet with 3023 rows and columns A-L. Here's a small sampling of Column A (with heading "sku" included, copied exactly as it appears in the spreadsheet):
A
sku
3102-0400-100000
3102-0400-200000
3102-0500-100000
3102-0500-200000
3102-0600-100000
3102-0600-200000
3102-0700-100000
3102-0700-200000
I need to delete every row in which column A includes the text "200000".
Although the above sampling shows "200000" appears in every other row, that is not the case in all 3023 rows.
I have a file with many intercompany transactions. There is a range of business unit numbers that if anyone one number is in both Column B "Bus Unit" and Column E "Affiliate" I want the row deleted.
Please see the attached, it is more clear I hope. The two yellow rows would be deleted.
The list of business units that I would want to never be on the same row is "4, 7, 41, 44, 46, 51"
I am looking for an Excel VBA code that can delete pair of rows that has certain criteria. I have included an example in the attachment and highlighted the rows that should be deleted. Since the values in each coloumn is going to change every day , I am looking for a dynamic code.
The objective is to:
To delete rows that has same code (columnd D), same basis (coloumn E), same Effective (coloumn H), value of TT (Column J) is either TI or TO and has offsetting Amounts (L) ie the sume becomes zero. Example pair of row 7 and row 8 as well as pair of row 12 and row 13 should be deleted.
TO and TI are actually transfer in and transfer out. Since the TI and TO for these rows make the amount zero for same code and same basis on the same effective date, I do not want to include this in the spreadsheet.
I have a sheet of data. The data starts in row 4 and can be variable in length. I want to delete rows that do not meet a specific criteria, for example a location, Leeds, which is in column "i" of the table. I have written the below but it seems to delete data from row 1 rather than row 4 and repeat down each row
Code below
Sub deleterows()
Dim i As Integer
Dim intCounter As Integer
Dim strLocation() As String
p = Range(Cells(4, 6), Cells(4, 6).End(xlDown)).count
[Code] ..........
I am looking for a formula that either accepts the number in a cell if the numbers on two other cells are "approved". In other words, I have on cell A1 my value to be tested. On cells A2 and A3 I have two numbers. On cell A4 I'm looking for a formula that copies the number on A1 if A2 is bigger then 0.25 and A3 is smaller then 0.35. In not, there's no copy or a N/A appears.
View 3 Replies View RelatedI have a table with 3 columns with an unkown number of rows (text, date, date) that is being imported daily.
I want to create a 4th column with dates starting from today and each subsequent row be one day earlier. I want to look at 30 previous days.
I then want to count the number of rows (looking at column 1-3) with the following criteria:
Countif column2<= "date in colum4" AND column3< "date in column4"
I have a large table, lots of rows and lots of columns that has material (Sand, stone, etc.) batched information. I wanted to be able to allow the user to use filters to select which data they want to view, then be able to review some summary information (totals by hour of the day, totals by material, etc.) on other sheets.
I had it working really well and fast using DSUM and/or SUBTOTAL, but these functions don't exclude non-visible (Filtered) lines in a list.
Using some previous posts I saw on this site, I was able to come up with something that works, but it is extremely slow.
What I need to do is to take a list of records on a sheet that contain up to 30 material columns of information (Target and Actual batch weight amounts.) I need to group each of these lines by material into a relative time bucket (12:00 AM to 12:59 AM, 1:00 AM to 1:59 AM, etc.) The user can of course select with Time Bucket they want to view
I am using the sumifs function with two critieria ( i.e. Time >=12:00 and Time < 1:00 ) to get the hourly buckets.
You can also see from this code that I have to count the number of lines for the data and each criteria value because I could not figure out how to set the range of "B" & "C" without counting. Since I am using a filter, I know that the ranges (from a row perspective) of A,B & C are the same, just the relative columns are different. I tried to use the offset function, (i.e. Range(B) = Range(A).Offset(-1,0).Select or B = A.offset(-1,0).Select but they failed for some reason, and no error messages either. I think I somehow turned the erroring off.
Function Vis(Rin As Range) As Range
'Returns the subset of Rin that is visible
Dim Cell As Range
'Application.Volatile
Set Vis = Nothing
For Each Cell In Rin
If Not (Cell.EntireRow.Hidden Or Cell.EntireColumn.Hidden) Then
If Vis Is Nothing Then
Set Vis = Cell
Else
I have a spreadsheet that is set out to look similar to a MS Project plan, with dates across the top, users in column A and Assignments in column B. In the corresponding cell that matches the user, date and assignment they will enter the number of hours they anticipate working on the assignment.
I then have a summary sheet that covers all assignments, week ending dates and users. I want to be able to calculate the hours and copy it into the cell in the summary sheet that matches the Day, User and Assignment. I have tried using SUMIF, but this requires the criteria cells to all be in columns, but with this sheet the dates are in a row.
I have built the following code which should look through a data sheet and then work out the instances where it meets the following criterias:
= "Client A"
= "First letter of surname is "a"
The code is as follows:
Public rowcn
Sub compare()
Dim rngTemp As Range
Dim intCounter As Integer
loop_col = "Client A"
data_sheet = "Data"
target_sheet = "Summary"
rowcn = 2
Do.............................
I need to count the number of occurances that meet two criteria i.e.,
Status needs to be UNSOLD
Size needs to be =>10.5 and also <12.5
Dress
Status
Size
1
UNSOLD
9
2
10.5
3
12.5
4
UNSOLD
12
5
15
How can u use sumifs to meet 2 critera and then sum the one column..
=SUMIFS('[South Pac Load Tracker - MAR14.xlsm]SPECIALS TEAM NZ'!$M$8:$M$100000,'[South Pac Load Tracker - MAR14.xlsm]SPECIALS TEAM NZ'!$C$8:$C$100000,B5,'[South Pac Load Tracker - MAR14.xlsm]SPECIALS TEAM NZ'!$B8:$B100000,$A$2)
That is the formula i used and it worked, yet when i try to use it for other names (where b5 would be) the numbers skew and do whatever they want..
I just want to sum all of the values in M:M which have B5 or "fiona" in columns C:C and also match the date from B:B with A2.
I believe ive done it right and as i say it does work with the first name in b5 but when i pull the formula down it doesnt work anymore...
Aim - Extract every word after: and before , and put them in the appropriate headings
I have attached my desired results in column B - E. To calculate the answer, the heading of the tile is normally just before the : Meaning the Answer is after the : and before the ,
On the attached example i would like a formula in F2 which sums all the values where column equals "Smith" and column B equals "Golf European". I'm assuming it would involve the SumIf formula but i'm not sure if this is the best solution when the criteria is in two columns?
View 3 Replies View RelatedI have a spreadsheet that has employee name and average hours worked.. The employee is listed multiple times because each row represents a pay period with number of hours worked. the last column I used to average the hours worked. So what I need is whenever there is a value greater than 30 in column g, I need to copy the row where column G has a value. It can be copied on the same sheet or on another.
View 9 Replies View RelatedI am trying to use this function to figure out averages for tests. there can be up to 25 tests in the sheet which is where the "YES" comes in. If the test booklet was used for this class then YES will be placed in the cell in field B2:B26.
Now thes issue I'm having is that the formula is doing the math for the fields C2:C26 if there is a number in them if there is even if it does not say YES in the B2:B26 field.
Here is the formula/function I'm using:
=(COUNTA(C2:C26))/COUNTIF($B$2:$B$26,"YES")
I have a list of items (TR Sets) from 1 to 96 in the range B4:B99, with values corresponding to each one (Acid Number) in the range C4:C99. I would like to make a separate list that names each TR Set (using numbers 1-96) that has an Acid Number > 0.1 . Is there a formula to do this?
View 13 Replies View RelatedI need to sum a column when the quantities meet two criteria. The name in one column, and the date in another column. Probably an easy formula, but new at this and having trouble.
View 4 Replies View RelatedI want to make a function that gets the range like. "A1:B9" And this function automatically gets the range when given criteria meet.
For example: I have a cell A1 with value 0 and next 0 value in cell A10. I want to put that function in C1. So this function returns me the range like " A1:B9"
I need a formula that will tell me if EITHER two cells = a text word. I've tried a few things and can't seem to get it to work!!!!
See in the example of my spreadsheet below: If A2 = FALSE or B2 = FALSE then D2 should display "Allowed" if either are TRUE D2 should display "Not Allowed"
Is this possible!?!?! I've tried way to many different formulas and am close to giving up..
A
B
C
D
1
Not Slow
50%
FY
Change
[Code] ........
Basically, need to count rows that have 5 columns of data in it. If all 5 columns within a row have something in them greater than one character, that row needs to be counted.
View 1 Replies View RelatedI want this macro todo is to start at the top of columns A to J
and work down the column and colour any cells that meet the criteria.
Range(“A1”).Select
Do Until ActiveCell = ""
If ActiveCell > 0 Then
Selection.ActiveCell.Interior.ColorIndex = 5
Else
ActiveCell.Offset(1, 0).Select
End If
Loop
End Sub
I need to extract key cell info from a master list when one of the cells meets a certain criteria.
Example:
Each row of the main sheet represents a Purchase Order with columns A-M each containing text, numeric, or currency values regarding that PO. Column F represents a 4-digit activity code that defines exactly what was purchased. If the activity code for a row is in the 1000 series (1000 -1099) I need to assign info from 3 other columns (say B, E, &G) to a subsequent sheet for tracking.
My limited Excel-o-vision has built this: (sheet 1 represented as FY10)
=IF(AND('FY10!F4>=1000,'FY10'!F4
I want to sum all cells in column A that have one of several tags in an adjacent cell in column B.
- Some of the rows in column A are not tagged
- There are currently 3 tags that are valid in column B (I, S, R), but this could increase (or reduce) in the future, say to I, S, R, E
- The possible tags are contained in a named range, but don't have to be
- It's not possible to restructure the data because the columns are in a scratch sheet, where a variety of calculations are created on the fly in the column. I've attached an example, which might make it clear
- There are several (up to 10) sheets like this in the workbook with lots of different calculations that are then summarised in to some analysis.
- The overall objective of the workbook is to be able to;
a) include/ exclude individual calcs for any one column
b) include/exclude a country - solved
In my spreadsheet I have several columns and I have written a formula that has two conditions. If these are met the result is counted. However I want to add another condition. I need to write a formula that displays information relating to the conditions in a cell if the other two conditions are met. For Example, if the formula picks out that a row has the word 'John' and has the a number between 1 and 14 it will copy the inputted data at the beginning of the row.
View 6 Replies View RelatedI have a filtered list of data expanded to "all" in each column. One column is "percentile" (25%, 50%, 75%, etc).
Search down the "percentile" column until you encounter 25% as an entry, then sum a number in the same row from a different column with each 25% entry you find.
I attached a spread. On the data tab, I have 2 criteria that I would like to use to move rows to another sheet. Columns U and W. An example would be that all rows that have a coil in Bay "B" and are allocated would go on the "B Allocated" sheet. I would also like this to automatically update when I delete the data in the data sheet and put new data in.
View 4 Replies View RelatedBP Formula.xlsxI'm not sure what formula to use or if Excel can do this. I want to use it to determine number of blood pressures in a certain range. So if I use column A for SBP (systolic BP) and column B for DBP (diastolic BP). I want a formula to tell me if column A is between 140-159 or column B is between 90-99. I can get that part, but what I'm having trouble with is it counting each row twice if both column A and B meet the criteria, whereas I want every row (person) to only be counted once if either column A OR column B meet the criteria. (See attachment)
View 5 Replies View RelatedI would like to pull all rows and columns from a table and copy them to a separate sheet. I would like to pull the data if a certain value is present in a particular column. Essentially, it is the same effect of filtering the data but I don't want to have to keep filtering and copying specific cells and pasting them into a different sheet if I need to change the raw data.
Example: I would like to copy all ids, store, and partner information IF the partner is "X". I would like to put this information in Sheet A.
Capture.PNG
I have a table that I would like to search to return all the values that meet 2 criteria entered by the user.
I have 3 columns - Role Name, Skill, and Skill Level - I'd like to be able to enter the skill and skill level and return all the roles that meet the two entered criteria.
At the moment I have an array, but it only returns the first value from the Role Name column that it finds.
=INDEX(A2:A100,MATCH(1,IF(C2:C100=G4,IF(E2:E100=H4,1))),0)
Where the A column is the role name, C is the Skill, and E is the Skill level. In cell G4 the user enters the skill to be search, and in H4 the level required for the skill (a scale of 1-4)
Is it possible for the formula to return all the values in column A that meet the criteria entered in G4 and H4?
