I have created a spreadsheet at work which is being used by a couple of people.
One of the worksheets rounds off figures from a table in sheet1. My problem is that once I've set the spreadsheet up it seems to work fine.
But i opened it again and it displayed a random figure but the formula stated "=#N/A".
I'm pretty sure all the computers are running the Addin correctly. Is there something I've left out?
I've got a spreadsheet with several rows and the numbers within those rows are totalled up at the bottom. Is there a way where i can highlight the cell within the spreadsheet and it takes it off the accumulative total at the bottom? or something similar to this effect? I just don't want to have to remove figures from this spreadsheet and highlighting will be a good way of seeing what has been done
View 1 Replies View RelatedI need a single formula that will give me a total figure each day.
I am trying to get a total weight for each days sales
Sheet 1 holds the unique ID and total items sold for each day
Sheet 2 holds the unique ID and the weight of each item.
I have got as far as creating helper cells but this is making the whole sheet way too big. I know there is a more efficient way .....
I learnt that " " & can combine the text and figure. However, when it comes to a negative numbers, i dont know how to maneouver it. Eg, Cell A1 is USD(50,000.00) and the comment in Cell B1 is Cost is USD(50,000.00). So the function in B1 = "Cost is "& what to put here?
View 3 Replies View RelatedI'm typing the formula straight into the cell and funny thing happens: the cell displays the formula, but not the result...
SO now I can see =A2+B2 and no values.
I’m looking for a formula that will give me a figure against the name in column A (name) while looking picking out a specific word within the column B, say "alarm"
So it reads
Alan Ingram 1
David walker 3
And so on...
i have a figure of 1000 in cell a1. i want to divide it by a figure in cell b1 and have an answer in c1, or divide it by a figure in c1 and have an answer in b1.
in summary, cell a1 has i figure in it while cells b1 and c1 are empty until i enter a number into one or the other.
See attached. This is a report that I have to do every month. I cant work out a formula for it. What I need is a formula that will pick out which is the largest Figure of column A,B,C,D for each row and put the corresponding header in column G. i have manually put these in. Would anyone know a formula i could use for this.
View 3 Replies View RelatedHaving problems with the following:
First Column Second Column Cumulative (B-A)
1 10 9
2 20 27
3 30 54
4 40 90
Every day,a new row is added and i want a formula at the top of the sheet to show the latest figure in column C.
Looking for a formula to show percentage increase of a figure.
Cell A1 is £45,000
Cell A2 is £51,000
Cell A3 ANSWER result shown as a percentage increase.
I have information across 5 cells what I want to say is if P3 is not equal 00/01/1900
Then copy and paste values of P3,Q3,R3,S3,T3 in a new sheet in cells P3,Q3,R3,S3,T3.
What is wrong with this formula
=MAX(ADDRESS(VALUE(D2),1),1 & ":" & ADDRESS(VALUE(D1),1))
when D2 is 2, D1 is 6 and
=ADDRESS(VALUE(D2),1),1 returns $A$2
Excel 2010
I have the following SUMIFS formula that produces the desired results until I get the the last qualifier, displayed in red:
=SUMIFS(JBHAMOUNT,JBHMONTH,C18,BNSFCATEGORY,B20,BNSFLOCATION,"Alliance")
The result of this formula is: #VALUE!
I have a range of dates B1:B100 which I want to compare to a certain date A1 and see how many are greater than my stated date A1.
I've tried with countif(B1:B100, "=>A1") which I thought would work, but it gives the error Value!
How do I do this?
I want to create a dynamic line graph using week and year numbers stated in another sheet.
e.g.
Start Year - 2012
End Year - 2014
Start Week - 3
End Week - 12
The top 2 rows above my graph data are as below:
Year - 2012 2012 2012
Week - 5 6 7 etc.
This works fine if the start and end year are the same but if it's greater than one year, it doesn't recognise that.
I have the following formulae to pick up a random number from 0 to 9999.
=TEXT(RANDBETWEEN(0,9999),"0000")
I want to start this random search from a specified number. for example if i press F9 it should show 3456 at first press and then onward.
I have a spreadsheet where I need the end result to be auto filled after recognition of an adhoc "top up" amount. How do I get E7 (3170) to automatically recognise the insertion of C7 (3000) to give this result without having to manually update the formula in E7?
DATE
PURCHASE
ORDER
PRODUCTIVE
[Code].....
i have the formula =CHAR(INT(RAND()*25)+65) which creates random number when dragged from say C1 TO C6 however i need the 3rd 4th or 5th character to be a random number between one and 9 is this possible?
View 9 Replies View RelatedI have 4 names, and a grid of 100 boxes. I need those 4 names randomly deposited in the 100 boxes, making sure each name is displayed an equal number of times (25 each) Is there an Excel formula to compute this?
View 9 Replies View RelatedI have a macro that inputs a sheet and cell from the user. when the macro tries to make a formula it outputs =data!'AE3'. I need it to output =data!AE3
Dim Sheet As String
Sheet = InputBox("Take Data from where?")
Dim startcell As String
startcell = InputBox("Start Cell?")
ActiveCell.FormulaR1C1 = "=" & Sheet & "!" & startcell & ""
I am creating a "board game" type game in excel and one of the functions will be landing on a cell. When you are on this cell you click the checkbox to the left of it which then flips the value to true. I then have another formula generating a random number between 1 and 100 if the value is true. I would like to make cards in a separate sheet out of single cells but make about 40-50 of them maybe less. I want it to be able to pull a card(cell's) contents into another cell on another sheet. But I want it to be a random card associated with the random number generator. I can definitely make changes if this isn't possible but the point of it is to show the contents of one of the random cards.
View 2 Replies View RelatedMy objective is to take two different random counts of numbers written in column b, ranging from B9:B66. However I want to highlight the specific fields listed in the example below, and pull random numbers from those selected fields only. Then I want to pull another set of random numbers in the same column B9:B66, however using a different specific set of fields within column B; as shown in the second random formula string. Use the Press 9 feature to randomly select the two different numbers. What this attempt is trying accommplish is selecting one boy, one girl who have assigned numbers adjacent to their names(name field populated in column c).
What am I doing in correctly?
HTML Formula written to B70
=INDEX(B9:B66,RANDBETWEEN(1,COUNTA(B9,B13,B15,B16,B17,B20,B21,B23,B25,B31,B33,B34,B35,B37,B38,B39,B41,B42,B44,B45,B47,B50,B51,B52)),1)
Formula written to B72
=INDEX(B9:B66,RANDBETWEEN(1,COUNTA(B10,B11,B12,B14,B18,B19,B22,B24,B26,B27,B28,B29,B30,B32,B36,B40,B43,B46,B48,B49,B53,B54,B55,B56)),1)
I was trying to figure how to write a formula that would return the contents of a cell in a table.
Here is the situation....
I have a 10 row by 10 column "grid". the top and left side of the grid contains a random number from 0 to 9. The numbers do not repeat.
It would remind you of a block pool.
If I have two numbers, 0 to 9 , is there a way to return the cell that corresponds to the intersection of those numbers in my table?
It would be both a Vlookup and an Hlookup which I can't do.
I am making a sheet that has many colums of data that I want to sumup colum wise. I am doing is using this macro ..
=============================================
Sub Add_Totals()
For Each NumRange In Columns("C").SpecialCells(xlConstants, xlNumbers).Areas
SumAddr = NumRange.Address(False, False)
NumRange.Offset(NumRange.Count, 0).Resize(1, 1).Formula = "=SUM(" & SumAddr & ")"
NumRange.Offset(NumRange.Count, -1).Resize(1, 1).Value = "TOTAL="
Next NumRange
End Sub...........
I just want to show a letter and change it to any letter and show it again in seconds. Can it be done with formula, maybe with RAND formula or any other formula.
for example when i press F9 the letter A change B, and then i press F9, it changed to C, and then when i press F9 and it changed to A again, and i press F9 and it changed to B, and so on...
(Is it possible too..with a little variation if i press F9 continually, it changed every 5 second?)
I am working on a Random Cycle Count Generator that provides random SKU#s based on 3 separate columns of SKU listings. The user clicks a button to generate the SKU#s to cycle count for that day. What I would like to see is a date stamp in the columns next(B,D,F) to the referenced SKU listing(A,C,E) based on which SKU#s are generated. This will let me see the last date that the SKU was generated. I would also like it to automatically save after generating.
View 2 Replies View RelatedI have a excel sheet from a supplier of mine, that has a mixture of text, and numbers and more importantly "Custom format cells" that have prices in them. I need to apply a multiplication formula to each price, but they are all in different rows and columns, and it will take forever to type a formula into each cell.
Is there a way that if I can select all these cells, to add a global formula that will update all these cells?
I am copying various rows from one spreadsheet to another (sheet3) and would like to total one of the columns. The trouble is that since I don't know how many rows there will be I am having trouble inserting a formula that will work. I am sure that there must be a simple solution but I can't seem to find it.
View 2 Replies View RelatedI have one worksheet which comes out of an online application (for the purposes of this example I will call it "Online Sheet"). The column headings in this sheets are always named the same but could theoretically appear in any column address. For example, the column header "Completed" could appear in column "X", or "AT", or "ZZ".
On a second sheet (called "Code Sheet") I have to unscramble all of this data into a standardize layout. Each row value has a unique ID which appears on both the "Code Sheet" and the "Online Sheet". However, in the "online sheet" the unique ID could also appear in any column. Like the "Completed" column this column also has a unique column heading ("Unique ID").
Using Match I can calculate the column number in which the "Completed" column appears in this instance of the online data. For example, "Completed" = Column "25". However, I now need to use some lookup function on this column based on the row in which my "Unique ID" appears of the "Online Sheet" (which could of course be in any column in the "Online Sheet").
For example, if "Completed" is in column "25" and the "Unique ID" which I am referencing on the "Code Sheet" appears on row 14 in the "Online Sheet", then the lookup formula must return the value of column 25 row 14 on my "Code Sheet".
I have 1200 doctor/patient records to input into an excel spreadsheet for import to an online EHR database. I can set up all the normal formulas and formatting but for the life of me not figure out how to create a custom formula to take the first letter of the patient first name and last name and add 6 figures to create a unique patient identifier.
ie. James + Smith+ random 6 figures = JS245318.
In my spreadsheet the first name is under Column 1, Last name Column 3 and the unique number generated in column 4.
