Excel 2010
I have the following SUMIFS formula that produces the desired results until I get the the last qualifier, displayed in red:
=SUMIFS(JBHAMOUNT,JBHMONTH,C18,BNSFCATEGORY,B20,BNSFLOCATION,"Alliance")
The result of this formula is: #VALUE!
I'm using Excel 2010. I have a spread sheet with sales data covering 3 years and multiple customers. I was able to create formulas such as this to calculate the figures for the entire sheet (all customers) by year.
=SUMIFS(J2:J12904,E2:E12904,">12/31/11",E2:E12904,"<1/1/13").
I believe that in order to use filters that show this date for a specific customer I need to convert this to a SUMPRODUCT formula, I've tried this multiple times and had no luck.
I have a workbook with multiple tabs that I update every other month with current data. I have one tab for data that I clear each time and copy the updated info into. (That info is copied from another excel spreadsheet, by the way.) On the second tab I have sumifs formulas set up to pull in certain data from the data tab. This setup has worked perfectly until today. I copied my data into the one tab but could not get the formulas to calculate. It looks like the formulas aren't picking up the data. I've checked to make sure the formulas are calculating automatically. I've retyped the formula. I've replaced the =. I tried naming the ranges I wanted the data to be picked up from. I've tried changing the format of the data - general, text, numbers, etc. I'm working in excel 2010
View 2 Replies View RelatedSUMIFS with less than & more than
I found this thread which works for normal ranges
I want to Sum for Values Greater than a specific date in my formula.
This first one works for a specific date (Relevant reference in red), so say 01/01/2014
Code:
=SUMIFS(Table2[[#All],[Basic]],
Table2[[#All],[Cluster]],Table3[[#Headers],[Company]],
Table2[[#All],[Start Date]],Table3[#Headers],
Table2[[#All],[Perm / Temp / Prof / ETA]],[@Company])
Code:
To Sum for ranges >= 01/01/2014, I have tried this below based on the thread above but Excel does not accept this.
=SUMIFS(Table2[[#All],[Basic]],
Table2[[#All],[Cluster]],Table3[[#Headers],[Company]],
">="Table2[[#All],[Start Date]],Table3[#Headers],
Table2[[#All],[Perm / Temp / Prof / ETA]],[@Company])
I am trying to find a formula that will allow me to reference another page in my spread sheet. In my scenario the row I am referencing has 5 consectutive numbers after the reference point I would use for a vlookup. These numbers are all zeros except for one number in each row which will be a positive number greater than zero. I want my formula to check the first cell in the row, if it is not a zero it will show that number, but if this cell contains 0, then it moves over to the next cell. If all the cells in the row have a zero, then i just want zero to appear on my summary sheet. I tried to do a vlookup with an IF function, but I couldn't get it to work. I have attached a sample of what the spreadsheet looks like.Example doc.xlsx
View 2 Replies View RelatedI wish to select all the cells which contain the word " Available " in column A at once . But i didn't find any option to do so using excel's Go TO Special feature.
I am using Excel 2010.
Invalid Qualifier to a Valid Qualifier (Application).
[Code]....
The code above yields me this error >>> Compile Error: Invalid Qualifier
[Code] ....
If I changed it to the one above, I'm getting this >>> Run-time error '91': Object variable or With block variable not set
I tried restarting excel (closing all workbooks and opening one back) then rerun. I am still getting the same error.
I have a dropdown box to choose a category.
When the category is chosen it displays the relevant course names which corresponds to that category (this could be 1 course up to 10 different courses).
Along with that course name it gives the relevant course overview.
This works exactly how i want it to. (thanks to Zbor from a previous thread)
I now want to expand further and give the corresponding course objectives for each course that shows up in the results.
I have attached a workbook as its much easier to see the dropdown box working.
Sheet 2 is the working sheet and sheet 1 will contain all the source data.
I have highlighted the columns affected in Blue Blue column on sheet 1 will have the course objectives on the same line as the course they belong to Blue column on sheet 2 is where they will be displayed when the correct category selection is made.
The course objectives are unique to the course title and course overview.
I am trying to set up a simple sports picking list using Excel 2010. I would like to be able to carry out several filers and then extract results to a new sheet to allow printing.
For example, there are four available terms and I would like to be able to filter by term/sport and student. Ideally I would like to be able to add a command button once this is working.
I'm trying to evaluate if 2 of the 3 criteria are met using an IF function in Excel 2010.
I have 3 columns of data. Each column has a number ranging from 0-15.
Example:
B2 = 0
C2 = 3
D2 = 4
Since B2 = 0, I'd like to have the equation return a 'Yes' because there are values greater than 0 for 2 of the three cells.
The hangup is that any of the three cells could potentially equal 0, so the equation must account for C2 or D2 being zero.
I'm trying to sum over a range (column A) based on values in another range (column B). Column B's cell values are calculated with a simple numeric formula that is either a subtraction or an addition of two cell references. I want to sum all the column A cells for which the corresponding column B cells are determined by a subtraction. Then separately, sum the cells for which the corresponding column B cells hold an addition. It seems that SUMIFS is the function to use, but how do I specify the sum criteria as "a subtraction" or "an addition"?
Windows 7, Excel 2007
I have a spreadsheet in version Excel 2007 that is refreshing data from Access tables. Users are needing charts to show progress by month, but are also needing to filter by area and one to filter by a section.
What I have so far is the data being calculated using SUMIFS so that I can pull between dates. I then added two comboboxes so that the user could filter by an area and by section. This is working, except that I have not been able to figure out how to allow the user to select "All" so that they can see all data from on or both of the selections.
Excel 2010 windows 8
I am in need of a formula to count filtered results. On Sheet1 (Job Flow) the user enters data continually . The most important is the Date in column D some measurements in columns N,O & P that gives a result as a code, example s15020 or c3005 in column Q. A vlookup is then pulls up a price for the code.
On sheet two Column A There is a list of all the codes. I need a formula that will give a count in column B for the amount of codes that was entered in to the data base "sold" for a date filtered time period, be it a week, month or year. In other words the codes in ,column A sheet 2, should reflect the amount of units for the time filter on page1.
I created a data validation formula for an Excel 2010 workbook that would only display client names who were assigned to the manager that they selected. The formula works fine in Excel 2010. However, when I open the same workbook in Excel 2007, the data validation type is reset to "Any value" and the formula is missing.
OFFSET is an available command in both 2007 and 2010. When I try to add the formula as a data validation list in 2007, an error indicates that Offset cannot access data in a different table. I have not been able to find any documentation which restricts the OFFSET command in Excel 2007 but there seems to be some incompatibility between the two Excel versions.
The formula I used was:
=OFFSET(Clients!$A$1,MATCH(Summary!$A$1,Clients!$A:$A,0)-1,1,COUNTIF(Clients!$A:$A,Summary!$A$1),1)
Where:
"Clients" is a sheet which lists all clients under each manager."Summary" is a separate sheet which contains the manager's name. Only clients matching this name will be available in the employee's client list.There are 50 "employee" sheets, each which should use this formula for data validation in the client column.
The error we received seemed to indicate that the above command could not access data on another worksheet. It is not an option for me to copy the client list onto each sheet that uses this formula. Are there any other options?
I have my data arranged in a table on sheet1 as shown below.
Columns B to H contain the hours each person normally works on the days of the week Sun to Sat. In columns I to O are the hours that each person has booked as holiday for that week.
On sheet2 I would like to be able to enter a holiday day in C1. In A3 to A15 I would then have a list of all the people who will be working on that day and in C3 to C15 have a list of the people who are on holiday so the output on sheet 2 would look like this.
Basically I'm after the formulas for A3 and C3 that can be copied down the column depending on how big my table gets. I am using Excel 2010.
I am using this formula:
=IF(O6>0,"",(VLOOKUP(A6,Material!A2:G43,7,FALSE)))/2000*O6
and it produces #N/A in the cell that contains this formula. If cell A6 has an item selected in it I made from data validation-list then the output is $0.00.
How can eliminate anything from showing if the list is blank in cell A6?
I have attached a work book example of what i am trying to do.
Column D is what i originally did in terms of the formula and now i have to have a column display text dependant on what is in column A to C.
I was trying this formula =IF(b2>a2,"Start Target Missed",IF(c2="","Failed","Tracking")) However if this isnt working.
Is there anything i can do to change this?
I am a Microsoft Excel 2010 user and am trying to create a usage report for a website that I work on. I have been compiling the usage reports into one spreadsheet. The columns I use are Month, Device, Language, Title 1, and Title 2. I can filter each of these rows and it shows me the number of records found. Each row on this spread sheet refers to a time that someone selected something on the site. For example the row may say;
Month (filtered)
Device (Filtered)
Lan (filtered)
[Code].....
How do I automatically populate a table on a separate sheet with the number of records found for a certain combination of filters applied. So if I'm looking at monthly trending I want to know how many times the stress test was started in May, June, or July, but automatically using info from the multiple filters.
What is a formula I can use to compile the filtered data from above.
Jan
Feb
Mar
Aprl
May
Start
=formula?
When I publishing from Excel document to PDF it produces differently sized pages as shown in attached. Is there a way I can achieve a same size page view without having to change the font size and page layout of the source Excel document?
View 4 Replies View RelatedThis is my formula with concatenation: =K3/K1*100 & "c" & " Each"
This is the result of the values in K3 divided by K1: 6.41666666666667c Each
I would like to limit the decimal places to two: 6.41c Each.
I have tried to format the cell and none of the formatting options have any effect.
If possible I would like to use the rounding function but I do not know how to combine the formula + text + rounding.
Not sure what formula to use for this set-up:
Col1 - Name_Last
Col2 - Name_First
Col3 - Ref_Name
The desired effect is under column 3, you have "Name_First Name_Last". Attached sample file.
If my file is like so
A1 B1 C1 D1 E1
A2 B2 C2 D2 E2
A3 B3 C3 D3 E3
i NEED THE OUTPUT IN NOTEPAD
A1B1 C1 D2 E1
A2 B2 C2 D3E2
The spacing varies from row to row
if i am saveing as notepad file....in macro how can i give the spacing properties give an example macro and i will customize it according to my need
Using Excel 2007.
I setup a named formula: Spread1 =Sheet1!$E$2:$BE$2 where I entered % values to spread a an annualized figure over 53 weeks
On Sheet 2 I entered the amount to spread in $D$2 and in $E.. I entered my formula: =Spread1 * $D$2. Everything appeared great!
But then I deleted a few columns on sheet2 so first calculation is now in $G$2
Spread1: =Sheet1!$E$2:$BE$2
Calculations: Sheet2! $G2:$BG$2 (the values in I,J,k while summing to the total are in the incorrect weeks based on the spread on Sheet1, BF and BG have #VALUE! errors)
Seems odd, if I highlight "Spread1" in the formula bar and [F9] I see an array of 53 possible values and the 3 values I expect are in the place in the array (elements 5,6,7).
How I can defeat it with the possibility that a user may delete a column?
I am using countif formula to count number of times each name appears in a row, but when I use the filter opeion and select a specific name, and highlight the whole row, the 'count' at bottom right of excel screen does not show same count as the outcome of countif. why is this so?Shouldnt they both be the same?
View 4 Replies View RelatedI hold some data in the Excel 2007 file. It's about 400 rows and about 10 columns. On occasion I have to print some values from this file. But it has to be in defined position on the paper. It is like I already have the prepared paper with fields, and I just have to fill some fields on the paper with data from the columns. Is it possible to make a program that will take each row that I label for printing, and print just some columns but in a defined position on the paper ?
View 5 Replies View RelatedI need to develope a macro for Excel to calculate desired profit margin depending on our cost of each item. Here's the scenario.
A1: landing cost
If 0
I created a drop down list in three cells for date, month and year using data validation.
But I need these cells to display by default DD,MM,YYYY.
what's the way to do it.
I have an expense sheet calculated, need to show the sum of the "+" number in
a cell that does a subtraction of 2 numbers .. income and subsidized ... as a
- that it negitave amount in red if it is less than a specific numbe. ie 2500
I am having a problem with excel, I need to create a search box, which will be displayed on my first work sheet, which is the summary page and I need to search through all of the information on the other sheets within the excel document, they type of information that I have rages from reference numbers, names and amounts (currency) and once someone has input the information that they are looking for and has found every occurrence it will display this on the summary page, is this something that can be done?
View 9 Replies View RelatedI'm typing the formula straight into the cell and funny thing happens: the cell displays the formula, but not the result...
SO now I can see =A2+B2 and no values.