Transferring Data From Multi Item Listbox Into A Cell
Jul 31, 2014
I have a Listbox (Listbox2) in column C. The listbox allows users to select multiple items (in this case it is countries). So the user could select 1 or 20 countries based on the previous criteria.
What I would ideally like is for the next column (column D) to automatically list the selected items without having to use a command button in the actualy cell. However, I could put a command button at the end to say "Confirm" which would then transfer the above into the relevant cells.
This is an excel file, and each row would works the same. Basically users are entering products for set up row by row, so the file could be 10 rows or 200.
Just to be clear, it would look a little like this:
Drop Down Listbox
Column C Column D
Canada (Selected) Canada, USA
I have a listbox with 8 columns. Multiselect is enabled, and it must stay this way. As part of my program, after the user presses a command button, I need to use the row indexes of the selected rows in order to copy the selected information into an array which is then placed in a different listbox, and then delete the items from the original list. Pseudocode of what I want to do:
But my understanding is that .ListIndex does not work this way with multiselect listboxes. I've tried searching for a solution for a while, but I cannot find one.
I use the code below to enter a value from a list box in a cell on a workssheet. Is it possible to code VBA to enter a number for the position of the selection in the listbox to a cell in a worksheet rather that the actual value from the list box. For example if my list is:
Option1 Option2 Option3
And I click on Option2 in the list, I can sennd the value 2 to a cell on the worksheet rather that the value "Option2' from the list.
Private Sub ListBox1_Click() Sheets("SA").Range("SA_Poistion_To_Archive_A_New").Value = ListBox1 End Sub
I have a listbox that has row and columns. The rows are combinations of options and the columns are Additives.
After selecting a row in Listbox1, (first column are names) i would like the value of the second column to goto a specific area.... find that value and in the cell to the right of it place a "Y". The "Y" would indicate that "yes" it was part of the selection row of the listbox. Same for third column, forth, fifth and sixth. The result from the listbox is a number of Y's and N's in the result page. Then making all that were not part of selected line and equal to "N" to hide row (height = to zero).
Listbox and expected result are in attached example worksheet.
The attached does show the need much better then I can explain it.
I have a multi-select listbox on a spreadsheet and a Command Button to transfer the selections to the sheet. When I make the selections and then click the button, it only transfers the first selected item, then clears the rest of the listbox selections and the code ends. The code I have is:
For i= 0 To lsBallotedPlayers.ListCount - 1 If lsBallotedPlayers.Selected(i) = True Then Sheet3.Range("F200").End(xlUp).Offset(1, 0).Value = Me.lsBallotedPlayers.List(i) End If Next
I have made a cash register in excel with a cell that counts the total of all cash coming in per day whenever you push the button with "payed". I have another sheet where there is a column with all the days of the year. What is the correct syntaxis for transferring the total cash to the cell next to the right date in the other sheet every time i push the "payed" button (am I making any sense...?). And is there a way to reset the total amount back to zero automatically whenever the day changes?
I have a mulit-extended listbox, a textbox and a button on a form.
I have populated the listbox with a list of files from a directory no problems.
First Part (Single Selection):
When I click on one/single filename in the list I want:
1. The textbox to be populated with the name I have selected
2. When I click the button (With the single filename selected, I want to call a function passing the filename I have selected.
The function could contain a msgbox(selecteditemname) for now.
Second Part (Multi Selection):
When I multi select filenames from the list I want:
1. The textbox to be populated with "Multiple Files Selected"
2. When I click the same button as before (With multiple filenames selected, I want to call a different function and pass each filename individually in may be a for loop)
The function could contain the loop and with each filename in the loop msgbox(selecteditemname)
I have tried the above and noticed that the listbox1.value property for multi listboxes dont seem to work and I am not really sure how to distinguish between one selection or multiselection to get a button to pass off to two separate functions.
I have a database with different categories assigned to employees. I wan't to do the following. I will use just as an example, I want to some how accomplish: If Cell A in worksheet 1 equals cell C in worksheet 2, then replace Cell L in worksheet 2 from cell b in worksheet 1. Basically we have a database with phone numbers with corresponding purchase codes for each phone number and their names. The problem is, all the purchase codes are incorrect on the spreadsheet. We have an updated spreadsheet with just phone numbers and no names. I need to somehow pull the proper purchase code from one worksheet to the old document replacing the old purchase codes.
I have written a VB-excel program after a lot of reading on this forum. Purpose of the program is to load a number of log-files with lots of data.
I load these files in a 2 column listbox, were the 1st column is the name of the file and the second column is a number, starting with 1, 2, 3 etc.
Since I don't get the files in the order I want them to be, I created a button to change the number in the 2nd column.
Now my problem: I need to sort the listbox according to the 2nd column. I have a routine that works ok, but whenever I make a mistake like duplicate numbers in the 2nd column, I lose all the data in the listbox and can start over again.
Dim listarray(20, 2) As Variant, Log_name As String, k, i, n, m, listnum, pos, remove_num
listnum = ListBox2.ListCount
For n = 0 To listnum - 1 pos = ListBox2.List(n, 1) - 1 Log_name = ListBox2.List(n, 0) listarray(pos, 0) = Log_name listarray(pos, 1) = pos + 1 Next n.................
However, i have come across a cell which displays the result of a reference to another cell (something simple like =b32). Normally I would just link to b32, however, the macro has to be applied to a large number of documents and in some cases text has been specifically entered, while in others the reference has been used. Is there any way of using VBA to display either the result of a formula (if there is one) or text if this is the case?
I am currently setting up a userform where one of the options is for an error code (chosen from a listbox) but the user has to be able to select multiple codes. I have the below working if it is NOT multi select, works a dream and goes in the right column.
VB: If ListBox2.Text = "A1" Then LastRow.Offset(1, 20).Value = "x" ElseIf ListBox2.Text = "A2" Then LastRow.Offset(1, 21).Value = "x"
But as soon as I set it to mutliselect and choose say A1 and A2 neither one writes, I imagine because Listbox2.text is now A1,A2 and not just one or the other.
I have a form with a list box on it, I want the listbox to display a number (1 through 20), the agents name, and a count of how many observations they have had. Unfortunately I have been unable to find an example of how to add multiple columns to a list box. I found the usual listbox1.list(x,x)= "whatever" type stuff but that doesn't seem to work right.
how to populate multiple columns including the headers, or point me to a site that explains it or has code examples?
Here is the data I want to put in the multicolumn listbox (the number and the agent name are from a worksheet, the deskside is a calculation sumproduct based on the 3 sheets that make up the quarter....
I have made the function below to return a variant multidimensional array. I pass the function an array of folder paths that I wish to search through looking at subfolders within that path where their name matches a search string that I pass to the function. eg., it will find a folder named "Catnap" if you pass the string searching for as "Cat*".
The size of the array it builds depends on how many folders it finds that match the search string and so needs to be built dynamically. Hence, I believe it builds a 2 dimensional array horizontally and I transpose it at the end of the function. In each element I put the folder name that was found in the first dimension and the path to that folder in its second dimension.
I have a 2 column listbox on a form that I set this array to. eg., Me.ListBox1.List = DirPaths("C:","Cat*",vbDirectory,100)
This works fine and shows a list of folder items found by folder and path in the two columns of the listbox if there is greater than 1 search found. However, when the search only finds 1 then the listbox shows the folder name with the folder path in row 2 of the list box. (See below).....
How do I select the first item in a listbox via code (userform).
Scenerio: A user starts with listbox3 and makes a selection for a font type. If the font selected doesnt exist on there system (code already taken care of, true or false) I want to automatically set the font to the first item in listbox3 as a default value transparently so the user can continue.
I have an excel column that includes many numbers. I want to add them to the listbox. But there are same numbers in the list. What I want to do is to add each number to the listbox only once. Example:
This is what I have__________________This is what I want 622768____________________________622768 622768____________________________631215 622768____________________________635054 631215____________________________647461 631215____________________________681216 635054