Format All Numbers With The Accounting Format
Jan 10, 2007
When working in Excel I format all numbers with the accounting format. I often use the single and double underlining feature on the Font tab of the Format Cells dialog box. Sometimes when I use the double underline it only puts (and prints) one underline. I've worked with the formatting many times with little success. The only way I can get the double underline to show up in this situation is to change the vertical cell alignment to be centered and then increase the cell height. This causes me other formatting heartaches. It's like the double underline is there it just will not show.
View 9 Replies
ADVERTISEMENT
Jun 26, 2014
I have formatted several cells with an Accounting style. However, the dollar sign doesn't show up until I click in the command line.
View 5 Replies
View Related
Aug 15, 2013
I have a column of data that may or may not have a formula in them. The cells are formatted in Accounting, w/o the leading $ sign. (i.e. 133.57) The value zero shows up as a hyphen or dash.
The issue is the format of the cell. In that attached worksheet, i inserted two formulas in cell b6 and b7. Both formulas are exactly the same, but the formatting is different. One is in the accounting format, but the other is in general. When I run the code, only the general formatted cell gets found.
My real worksheet is in the accounting formatted code, so I don't want to change my worksheet's numbers into a general format. How I can find the zero value thats in an accounting format?
Below is a strip down version of the code.
VB:
Sub test()[COLOR=#333333]
[/COLOR] Dim rLookInADR As Range
Dim foundcell As Range
Set rLookInADR = Range("b1:b380")
Set foundcell = rLookInADR.Find(what:=0, LookIn:=xlValues, lookat:=xlWhole)
MsgBox (foundcell.Row)
End Sub
[COLOR=#333333][/COLOR]
View 5 Replies
View Related
Jan 15, 2009
I am using Excel 2003. I am attempting to use the Accounting format with numbers that should not have any decimal places (although what is entered might have a decimal place). The numbers line up fine on the right, however, the dollar signs on the left are not lining up. It looks something like:
View 4 Replies
View Related
Mar 26, 2009
i am doing some calculations using vba in excel, i need to know how to set the cell format to 'accounting' in vba ?
View 2 Replies
View Related
Oct 31, 2013
I'm using this custom format
Code:
_-£* #,##0.00_-;[Red]_-£* #,##0.00_-;_-£* "-"??_-;_-@_-
How do I modify it so that if the value is 0.00 then 0.00 is showed and not the current "-"?
View 3 Replies
View Related
Jun 14, 2013
I export raw data from my accounting system each month that I then format for use in another application that uses the data to produce customer statements. I have attached a file that shows the raw data in the first sheet and the formatted data in the second sheet. I recorded a macro while I did the process but I need to change the code to deal with dynamic data as the number of rows may be different every month.
Here are the steps I go through:
1. Clear the first 3 rows and the last 5 rows
2. Copy the totals in the last row of the data and paste them in the first row
3. Subtotal the different categories in row 2 and add a validity check
4. Add a new column A with a formula to add customer numbers on each line
=IF(ISERROR(FIND("00000",B5)),A4,B5
5. Copy the formulas and paste values over them
6. Filter the data to show blanks under the "Doc Date" column, delete all rows
7. Filter the data to show blanks under the "Type" column, delete all rows
8. Filter the data to show "Total:" under the "Apply No" column, delete all rows
9. Turn off filters, format all numbers in accounting format
10. Check the validation at the top to ensure no transactions were deleted
View 6 Replies
View Related
Feb 1, 2012
In the accounting number formats, the available currency symbols are Dollar ($), Pound (₤), Euro (€), and Yuan (¥). But how can I add a custom currency symbol? For example instead of writing "$1,000", I want to write "BDT. 1,000" or "৳ 1,000". How can I do that?
View 4 Replies
View Related
Jul 26, 2014
I have tried to write code to format numbers to zero decimal places as well as to justify the format as the zeroes appears as 00000000 when imported.
I need the macro to do this on the first 7 sheets.
I also need ------- lines and ) to be cleared on the first 7 sheets.
I have attached sample data and my code below
Code:
Sub Format_Data()
Dim Cnt As Long, i As Long
Cnt = Sheets.Count
Application.DisplayAlerts = False
For i = Cnt To 7
Range("F:H").Select
With Sheets(i)
[code]....
View 1 Replies
View Related
Nov 21, 2006
how i convert text format into numbers format in vb.
Currently
i have a formula in vB:
Private Sub Textbox3_Change()
Textbox3 = Val(Textbox1.Value) + Val(Textbox2.Value)
End Sub
however..when i sum it up (in excel) using"=sum" formula...it ooes not sum up
I faced an error "number stored as text"..how to i convert it to numbers format in vb.
View 9 Replies
View Related
Jan 19, 2010
How to format different numbers to the same format (as text). Mainly I need code that would format numbers like 25, 25.36 or 254.60 to numbers looking like this 000002500, 000002536, 000025460. They must be of nine digit length with the last two digits as decimals.
View 9 Replies
View Related
May 16, 2007
I am trying to format colums containing numbers & units of measure to numbers only.
I am using Office 2003.
View 3 Replies
View Related
Aug 10, 2009
I have created a userform but I am having extensive problems with the date formats.
My system is set to UK and short date is set to: DD/MM/YYYY
When I used code to add the values in the userform to the spreadsheet, any that contained a date format would revert to the US format.
So I finally figured out to use DateValue to format it correctly for example: ...
View 2 Replies
View Related
Jun 7, 2006
I have a column of cells with values - 0.2%, 0.32%, 0.22, 0.5 etc. The cells with % symbol are in ' Percentage, 2 decimal' format while the plain numbers are in 'General' format i.e. column contains cells in either of these formats. I need a macro where I can specify the column and it will select the cells with the % format, convert it to 'General' and multiply the result by 100 eg. 0.2% converted to 'General' becomes 0.002. When multiplied by 100, result is 0.2 i.e. is displayed without the % symbol.
View 7 Replies
View Related
Mar 31, 2014
One of the reports I run provides me information on lengths of time. Such a field displays as |0:09:16| indicating 9 minutes and 16 seconds. However, when the report generates the excel spreadsheet it saves these cells in date/time format ([h]:mm:ss). If I were to convert this field to the number format (so I can manipulate and graph it) it displays as such |0.00643460648148148| Ideally I would be able to have the data in the field stored as |556| (556 seconds, or 9 minutes 16 seconds). I have thousands of fields that I need to manipulate where the data is stored in this format and I can not figure out how to fix it.
View 5 Replies
View Related
Oct 15, 2009
How can I format cells to contain Minutes, Seconds and Hundredths of seconds to be used in calculations eg 1.24.99 means 1 minute and 24.99 seconds. Example calculation is: 1.24.99 - 1.24.90 =0.0.09
View 2 Replies
View Related
Feb 11, 2009
I need to format some climatic data from a weather station into a desired format. There are a lot of cut&paste and transposing involved. I think it will be easy but tedious for anyone trained in VB to write a macro but unfortunately I am not. I've tried recording a macro but it turns out that it is not general enough to deal with all the spreadsheets that I've got.
I've attached a spreadsheet which shows the original format (in sheet 1) and the desired format (in sheet 2). To briefly describe, I only need the temperature data for 8am and 2pm, the rest of the information in sheet 1 is useless to me.
View 2 Replies
View Related
Oct 26, 2012
Every month, I have an import a report to a spreadsheet. At my column A, it supposed to be a date format.
For some reasons, I have a combination of a few cells of date format and a few cells of general format with no order at all.
What I need is: Search in the A column, if date format leave it , if not change from general to date format.
View 2 Replies
View Related
Aug 1, 2013
I have an Excel 2010 spreadsheet where the default number format keeps switching to the date format. I keep switching it back and it'll stay as a number format for a time, but then it'll switch back. This is also the case for any new worksheets in that one spreadsheet.
This only happens with this one file - everything else behaves according to my regional settings or to how the file had been previously formatted.
View 3 Replies
View Related
Dec 19, 2006
I have a Sheet ( Named "Summary" for Example ) of about 4,000 Rows that has a LOT of Conditional Formatting.
I Added Another 100 Rows this Morning and when I Tried Saving it a Message Saying that Not All the Formatting for the New Data that had Been Added had Been Saved. Is there a Macro or Something I can Run that will Make the Conditionally Formatted Cells Stay the Colour that they are but Delete the Conditional Formatting Part of it Achieved Using "Format" & "Conditional Format" from the Menu Please.
Ideally I would like to be Able to Enter the Number of Rows ( From Row ? to Row ? ) that I want this to Apply to.
View 9 Replies
View Related
Feb 3, 2007
I have a forecast which is sorted by product code by week vertically. I need to create a lookup to re-format this information into a horizontal format by week. I have started this by transposing the information as my attachment shows but I am hoping there is a lookup formula which will be easier and quicker. I have attached the actual document and the data I want to sort is Sheet 2. I have started in Sheet 1. I want to look up the code in column A, then lookup the week number which would be B2 in Sheet 1 and return the value of that Code in that week from Sheet 1.
View 2 Replies
View Related
Jun 12, 2008
I would like to have a single button that changes a range of cells from the USD to EURO to perhaps CAD symbol. Can this operation be performed, such that if I start in dollars, and I click the button once, it shifts by range to EURO (not formulas...just symbol)...and then if I click the same button again, it goes to CAD, and then back to USD with a third click?
View 5 Replies
View Related
Apr 9, 2014
I'm trying to format numbers in a cell into words. For example, if I type 1 in a cell, I would like it to show the word Optimistic. If i type 2 in the cell I would like it to show the word "Realistic", 3 to show "Pessimistic".
How would I be able to do that?
View 7 Replies
View Related
Nov 13, 2008
For example: I have a spreadsheet with a column that has numbers such as 48600. When I go to format it into currency, etc. I select the decimal to move 2 places. Although it keeps giving me $48,600.00. I dont want that. I want it to put $486.00.
When I try to increase or decrease a decimal, it wont do anything until I have a decimal already in the number. So then I took 48600.00 and tried to increase/decrease the decimal, but it gives me either 48600.00000 or 48600. What I need is to make my number 48600 $486.00
View 2 Replies
View Related
Jan 5, 2007
I have numbers that are 321.55 and then some that are 31.57#.
How can make all of the numbers without the # at the end?
Formate dose not work, the only way I can fine to drop the # at the end is to go to each line and delete the #.
Is there a way to drop the # at the end?
321.55
321.56
321.57
321.57#
321.57#
321.55#
321.53#
View 9 Replies
View Related
Nov 2, 2006
In the publishing industry we have what we call ISBN numbers you will see that every book has a unique number. For thee company that I work for the number always starts as follows -
978-0-7153-
This is followed by five numbers sometimes 4 with a letter i.e.
978-0-7153-12345
978-0-7153-1234X
Is it possible to pre format the cells in a column so that the 978-0-7153- part of the code would be there hiding in the background and all you have to do is type the 12345 to get 978-0-7153-12345 displayed?
View 3 Replies
View Related
Aug 29, 2007
I have a number format that I need assistance with:
The number format I need is 1234-000 or 1234-001
The normal number format is 1234-000, very rarely does the 1234-001 be used. So I would like the number format to left fill the left section 1234 and right fill the right section 001.
View 7 Replies
View Related
May 1, 2014
I have around 30k data. which is in invalid format.
Ex: 12987654321vinay kk 876543219
32567456789 kkccjhg fo 345678921
I want to convert this into correct format as below with start letter from
MOD, 987654321,, vinay, kk,87654219
MOD,567456789, , kkccjhg, fo,345678921
I want to know which are formulas I have to use to get this info in correct format.
View 1 Replies
View Related
Mar 1, 2007
In order to export an excel table into another program I first need to save the excel file as .txt. The .txt file can then be imported by the other program.
First I however need to make excel understand that the value should be a text and not a value. I therefore format the number as text (0000150235) by adding "0000150235". After saving the file as .txt the format changes from "0000150235" to """0000150235""". I do however need the format in the .txt file to be "0000150235". Can anyone tell me how I can save "0000150235" as .txt and get the value "0000150235" in the .txt file.
View 14 Replies
View Related
Jan 24, 2010
I'm trying to format my email generated of excel sheet to have an HTML formal before they are sent out using MS Outlook.
I have googled, searched your forums and also tried to figure out a solution with the existing helps on the internet. I need help on how to format emails genarated out of my excel sheet. I know a bit of HTML syntax but a newbie to VBA. I'm guessing the formatting has to be done in the Emailbody text function in my code.
I'm also trying to understand the logic behind the code and also learning excel vba bit by bit at the minute.
View 10 Replies
View Related